Refine Your Search

Date

Date

Impact and Rollover Test Procedures Standards Committee Test procedures Magnesium alloys Powder metallurgy Welding Heat treatment Metallurgy

Search Results

Viewing 1 to 18 of 18
1
Sort by title
Standard

Vehicle Roof Strength Test Procedure
2015-03-13
CURRENT
J374_201503
This SAE Recommended Practice establishes a uniform laboratory test method to evaluate the strength characteristics of roof systems. The test procedure is intended to provide reliable and repeatable results and to permit numerical comparisons. A test is conducted in which the vehicle roof system is loaded under controlled laboratory conditions. Structural strength measurements are obtained under load application angles chosen to concentrate forces on the forward portions of the roof panel and roof supporting structure.
Standard

Vehicle Roof Strength Test Procedure
2002-01-17
HISTORICAL
J374_200201
This SAE Recommended Practice establishes a uniform laboratory test method to evaluate the strength characteristics of roof systems. The test procedure is intended to provide reliable and repeatable results and to permit numerical comparisons. A test is conducted in which the vehicle roof system is loaded under controlled laboratory conditions. Structural strength measurements are obtained under load application angles chosen to concentrate forces on the forward portions of the roof panel and roof supporting structure.
Standard

Vehicle Roof Strength Test Procedure
2009-05-22
HISTORICAL
J374_200905
This SAE Recommended Practice establishes a uniform laboratory test method to evaluate the strength characteristics of roof systems. The test procedure is intended to provide reliable and repeatable results and to permit numerical comparisons. A test is conducted in which the vehicle roof system is loaded under controlled laboratory conditions. Structural strength measurements are obtained under load application angles chosen to concentrate forces on the forward portions of the roof panel and roof supporting structure.
Standard

VEHICLE ROOF STRENGTH TEST PROCEDURE
1997-10-01
HISTORICAL
J374_199710
This SAE Recommended Practice establishes a uniform laboratory test method to evaluate the strength characteristics of roof systems. The test procedure is intended to provide reliable and repeatable results and to permit numerical comparisons. A test is conducted in which the vehicle roof system is loaded under controlled laboratory conditions. Structural strength measurements are obtained under load application angles chosen to concentrate forces on the forward portions of the roof panel and roof supporting structure.
Standard

VEHICLE ROOF STRENGTH TEST PROCEDURE
1991-05-01
HISTORICAL
J374_199105
This SAE Recommended Practice establishes a uniform laboratory test method to evaluate the strength characteristics of roof systems. The test procedure is intended to provide reliable and repeatable results and to permit numerical comparisons. A test is conducted in which the vehicle roof system is loaded under controlled laboratory conditions. Structural strength measurements are obtained under load application angles chosen to concentrate forces on the forward portions of the roof panel and roof supporting structure.
Standard

Rear Underride Guard Test Procedure
1997-09-01
CURRENT
J260_199709
This SAE Recommended Practice is intended to provide a uniform basis for evaluating the effectiveness of rear underride devices employed to reduce the likelihood of penetration of the passenger compartment of an impacting vehicle. The procedures described in this report provide means for determining the characteristics of rear underride guard, taking into consideration the nature and direction of forces involved.
Standard

REAR UNDERRIDE GUARD TEST PROCEDURE
1990-06-01
HISTORICAL
J260_199006
This SAE Recommended Practice is intended to provide a uniform basis for evaluating the effectiveness of rear underride devices employed to reduce the likelihood of penetration of the passenger compartment of an impacting vehicle. The procedures described in this document provide means for determining the characteristics of a rear underride guard, taking into consideration the nature and direction of forces involved.
Standard

REAR UNDERRIDE GUARD TEST PROCEDURE
1971-09-01
HISTORICAL
J260_197109
This SAE Recommended Practice is intended to provide a uniform basis for evaluating the effectiveness of rear underride devices employed to reduce the likelihood of penetration of the passenger compartment of an impacting vehicle. The procedures described in this report provide means for determining the characteristics of a rear underride guard, taking into consideration the nature and direction of forces involved.
Standard

PASSENGER CAR DOOR SYSTEM CRUSH TEST PROCEDURE
1980-06-01
HISTORICAL
J367_198006
This SAE Recommended Practice establishes a uniform laboratory test method to evaluate the capability of passenger car door systems to resist a concentrated lateral inward load. The procedure is intended to provide repeatable results and to permit numerical comparisons. A test is conducted in which the door and related structural members of the vehicle are loaded under controlled laboratory conditions. Structural strength measurements obtained under these conditions are reproducible. Background information and rationale for the test procedures described in this Recommended Practice are provided in the Appendix.
Standard

MOVING BARRIER COLLISION TESTS
1966-11-01
HISTORICAL
J972_196611
Collision tests are conducted on automotive vehicles to obtain information of value in evaluating structural integrity and in reducing occupant injuries. Deceleration conditions during a moving barrier impact are more severe at a given speed than those produced by using a crushable vehicle but are more readily reproducible than those occurring during impacts of two vehicles. The purpose of this SAE Recommended Practice is to establish sufficient standardization of moving barriers and moving barrier collision methods so that results of tests conducted at different facilities may be compared.
Standard

Linear Impactor Calibration Procedure
2023-05-10
CURRENT
J3095_202305
This SAE Recommended Practice provides a procedure for measuring quantitatively the physical characteristics of linear impactors that are believed to effect impact test accuracy, repeatability, and reproducibility. Suggested values and tolerance are also provided for specific applications of linear impactor testing (i.e., ejection mitigation tests, head form impact tests, body block tests). Two functional groups of linear impactors are considered: those whose function is related primarily to displacement, and those related to measuring acceleration or force.
Standard

Linear Impactor Calibration Procedure
2016-06-17
HISTORICAL
J3095_201606
This recommended practice provides a procedure for measuring quantitatively the physical characteristics of linear impactors that are believed to effect impact test accuracy, repeatability, and reproducibility. Suggested values and tolerance are also provided for specific applications of linear impactor testing (i.e. Ejection Mitigation tests, Head form Impact tests, Body Block tests). Two functional groups of linear impactors are considered, those whose function is related primarily to displacement and those related to measuring acceleration or force.
Standard

Dolly Rollover Recommended Test Procedure
1999-10-01
HISTORICAL
J2114_199910
This SAE Recommended Practice describes the test procedure for conducting a rollover test using a dolly fixture designed to laterally trip a vehicle into a roll. Its purpose is to establish a recommended test procedure which will standardize the procedure between different test facilities. A description of the test procedure, test instrumentation, photographic/video coverage, and the rollover fixture is included.
Standard

Dolly Rollover Recommended Test Procedure
2011-02-21
CURRENT
J2114_201102
This SAE Recommended Practice describes the test procedure for conducting a rollover test using a dolly fixture designed to laterally trip a vehicle into a roll. Its purpose is to establish a recommended test procedure which will standardize the procedure between different test facilities. A description of the test procedure, test instrumentation, photographic/video coverage, and the rollover fixture is included.
Standard

DOLLY ROLLOVER RECOMMENDED TEST PROCEDURE
1993-04-01
HISTORICAL
J2114_199304
This SAE Recommended Practice describes the test procedure for conducting a rollover test using a dolly fixture designed to laterally trip a vehicle into a roll. Its purpose is to establish a recommended test procedure which will standardize the procedure between different test facilities. A description of the test procedure, test instrumentation, photographic/video coverage, and the rollover fixture is included.
1
X