Standard
Zinc Alloy Castings, Die 4.0Al - 0.04Mg (AG40A) As Cast
2022-07-19
CURRENT
AMS4803F
This specification covers a zinc alloy in the form of die castings.
Search Results
Standard
Uphill Quenching of Aluminum Alloy Product
2024-02-05
WIP
AMS2767B
This specification establishes engineering requirements for the uphill quenching process. Uphill quenching immerses product in liquid nitrogen followed by exposure to a high pressure/velocity steam blast or boiling water.
Standard
Tin Bronze Castings, Sand and Centrifugal 87.5Cu - 10Sn - 2Zn As Cast
2009-10-23
HISTORICAL
AMS4845H
This specification covers a tin bronze in the form of sand and centrifugal castings.
Standard
Tin Bronze Castings, Sand and Centrifugal 87.5Cu - 10Sn - 2Zn As Cast
2021-07-20
WIP
AMS4845K
This specification covers a tin bronze in the form of sand and centrifugal castings.
Standard
Tin Bronze Castings, Sand and Centrifugal 87.5Cu - 10Sn - 2Zn As Cast
2015-12-04
CURRENT
AMS4845J
This specification covers a tin bronze in the form of sand and centrifugal castings.
Standard
Test Method and Limits for Bow Height of Aluminum Sheet Samples After Chemical Milling
2021-11-02
CURRENT
AS6507
The results of this test are intended to be a useful indication of the resistance to distortion of bare or two-side Alclad, flat sheet aluminum used in chemical milling applications.
Standard
TOLERANCES, METRIC Aluminum Alloy and Magnesium Alloy Sheet and Plate
1995-05-01
HISTORICAL
MAM2202B
This specification covers established manufacturing tolerances applicable to aluminum alloy and magnesium alloy sheet and plate ordered to metric dimensions. These tolerances apply to all conditions, unless otherwise noted.
Standard
TOLERANCES, METRIC Aluminum Alloy and Magnesium Alloy Sheet and Plate
1980-10-01
HISTORICAL
MAM2202
This specification covers established manufacturing tolerances applicable to aluminum alloy and magnesium alloy sheet and plate ordered to metric dimensions. These tolerances apply to all conditions, unless otherwise noted.
Standard
TOLERANCES, METRIC Aluminum Alloy and Magnesium Alloy Sheet and Plate
1985-04-01
HISTORICAL
MAM2202A
This specification covers established manufacturing tolerances applicable to aluminum alloy and magnesium alloy sheet and plate ordered to metric dimensions. These tolerances apply to all conditions, unless otherwise noted.
Standard
TOLERANCES Copper and Copper Alloy Wire
1945-07-01
HISTORICAL
AMS2224
Standard
TOLERANCES Copper and Copper Alloy Seamless Tubing
1945-08-01
HISTORICAL
AMS2223
Standard
TOLERANCES Copper and Copper Alloy Rods and Bars
1945-07-01
HISTORICAL
AMS2221
Standard
TOLERANCES Copper and Copper Alloy Plate, Sheet and Strip
1945-07-01
HISTORICAL
AMS2222
Standard
TOLERANCES Aluminum-Base and Magnesium-Base Alloy Sheet and Plate
1971-05-15
HISTORICAL
AMS2202J
Standard
TOLERANCES Aluminum-Base and Magnesium-Base Alloy Sheet and Plate
1973-05-15
HISTORICAL
AMS2202K
This specification covers established manufacturing tolerances applicable to aluminum-base and magnesium-base alloy sheet and plate. These tolerances apply to all conditions, unless otherwise noted. The term "excl" applies only to the higher figure of the specified range. Dimensions in U. S. conventional units are primary; dimensions in SI units are shown as the equivalent of the inch/foot dimensions and are not to be construed as standard for product produced to SI dimensions.
Standard
TOLERANCES Aluminum and Magnesium Alloy Sheet and Plate
1960-06-30
HISTORICAL
AMS2202C
Standard
TOLERANCES Aluminum and Magnesium Alloy Sheet and Plate
1960-11-15
HISTORICAL
AMS2202D
Standard
TOLERANCES Aluminum and Magnesium Alloy Sheet and Plate
1962-06-30
HISTORICAL
AMS2202E
Standard
TOLERANCES Aluminum and Magnesium Alloy Sheet and Plate
1964-01-31
HISTORICAL
AMS2202F
Standard
TOLERANCES Aluminum and Magnesium Alloy Sheet and Plate
1968-05-01
HISTORICAL
AMS2202G
