Standard
Welding, Electron-Beam
2022-01-21
CURRENT
AMS2681B
This specification defines the procedures and requirements for joining metals and alloys using the electron-beam (EB) welding process.
Search Results
Standard
Welding of Structures for Ground Support Equipment
2014-04-08
CURRENT
ARP1330D
This recommended practice provides general recommendations for welding structural assemblies for aerospace ground support equipment.
Standard
Ultrasonically Activated Needle Peen Forming
2022-10-26
CURRENT
AMS2588
This specification covers the equipment and process requirements for forming or straightening metal parts using Ultrasonically Activated Needle Peening.
Standard
Tungsten Disulfide Coating, Thin Lubricating Film, Binder-Less Impingement Applied
2010-01-05
HISTORICAL
AMS2530
This specification covers a coating consisting of tungsten disulfide without binders and not requiring a curing process.
Standard
Tungsten Disulfide Coating, Thin Lubricating Film, Binder-Less Impingement Applied
2019-01-14
CURRENT
AMS2530A
This specification covers a coating consisting of tungsten disulfide without binders and not requiring a curing process.
Standard
Tungsten Carbide-Cobalt Powder Agglomerated and Sintered
2003-04-30
HISTORICAL
AMS7881
This specification covers tungsten carbide-cobalt in the form of powder.
Standard
Treatment of Sheet Metal Parts Corrosion-Resistant Steel
2017-09-20
CURRENT
AMS2550F
This specification covers the engineering requirements for a treatment to provide enhanced corrosion resistance to sheet metal parts, such as brackets, spacers, and washers, fabricated from martensitic Corrosion-resistant steels, usually AMS 5504 or AMS 5508 and having hardness not higher than 40 HRC, or ferritic corrosion-resistant steels, usually AMS 5506. The treatment is not recommended for use on parts subject to impact in service.
Standard
Treatment of Sheet Metal Parts Corrosion-Resistant Steel
2014-07-31
HISTORICAL
AMS2550E
This specification covers the engineering requirements for a treatment to provide enhanced corrosion resistance to sheet metal parts, such as brackets, spacers, and washers, fabricated from martensitic Corrosion-resistant steels, usually AMS 5504 or AMS 5508 and having hardness not higher than 40 HRC, or ferritic corrosion-resistant steels, usually AMS 5506. The treatment is not recommended for use on parts subject to impact in service.
Standard
Toluene, Industrial Grade
2015-10-14
CURRENT
AMS3180G
This specification covers, industrial-grade toluene in the form of a liquid.
Standard
Toluene, Industrial Grade
2010-05-17
HISTORICAL
AMS3180F
This specification covers, industrial-grade toluene in the form of a liquid.
Standard
Thread Compound, Anti-Seize, Graphite-Petrolatum
2006-04-21
HISTORICAL
AMS2518B
This specification covers an anti-seize compound in the form of a grease.
Standard
The Pre-Treatment and Protection of Steel Items of Specified Maximum Tensile Strength Exceeding 1450 MPa
2017-03-21
CURRENT
AMS03_4A
This SAE Standard specifies the special treatments and precautions that are to be observed when protective and other surface treatments are applied to items, including springs, made from steel of specified maximum tensile strength exceeding 1450 MPa. The requirements of this Standard qualify those in process specifications and override the latter where there is conflict. The Standard also gives advice on design, manufacture, and preparation of items prior to cleaning and protection.
Standard
The Pre-Treatment and Protection of Steel Items of Specified Maximum Tensile Strength Exceeding 1450 MPa
2015-04-27
HISTORICAL
AMS03_4
This SAE Standard specifies the special treatments and precautions that are to be observed when protective and other surface treatments are applied to items, including springs, made from steel of specified maximum tensile strength exceeding 1450 MPa. The requirements of this Standard qualify those in process specifications and override the latter where there is conflict. The Standard also gives advice on design, manufacture, and preparation of items prior to cleaning and protection.
Standard
The Chemical Milling Process
2021-07-15
CURRENT
ARP1331C
This practice provides recommendations concerning the chemical milling of aluminum, magnesium, high temperature nickel alloys, titanium alloys, copper alloys, and specialty alloys.
Standard
Test Methods Evaluation of Nonflammable, Chlorotrifluoroethylene Base Hydraulic Fluid
2000-08-01
CURRENT
AS4707A
This SAE Aerospace Standard (AS) covers laboratory test methods required to evaluate nonflammable hydraulic fluids. The methods of testing and description of the equipment have been used typically for evaluating chlorotrifluoroethylene (CTFE) base hydraulic fluids.
Standard
Terms Used in Aerospace Metals Specifications
2021-09-15
CURRENT
AS7766
This SAE Aerospace Standard (AS) defines and clarifies terms used in aerospace materials and process specifications, standards, and recommended practices.
Standard
TUNGSTEN CARBIDE-COBALT COATING Detonation Process
1994-02-01
HISTORICAL
AMS2435D
This specification covers the engineering requirements for applying tungsten carbide/cobalt coatings to metal parts by the detonation process and the properties of such coatings.
Standard
TUNGSTEN CARBIDE-COBALT COATING Detonation Process
1994-10-01
HISTORICAL
AMS2435E
This specification covers the engineering requirements for applying tungsten carbide/cobalt coatings to metal parts by the detonation process and the properties of such coatings.
Standard
TUNGSTEN CARBIDE - COBALT POWDER Sintered and Crushed
1970-11-01
HISTORICAL
AMS7880
Standard
TREATMENT OF SHEET METAL PARTS Corrosion-Resistant Steel
1992-04-01
HISTORICAL
AMS2550D
This specification covers the engineering requirements for a treatment to provide enhanced corrosion resistance to sheet metal parts, such as brackets, spacers, and washers, fabricated from martensitic corrosion-resistant steels, usually AMS 5504 or AMS 5508 and having hardness not higher than 40 HRC, or ferritic corrosion-resistant steels, usually AMS 5506. The treatment is not recommended for use on parts subject to impact in service.
