Search Results

During design of the 777 Airplane, light gage, near net section 2090-T86 extrusions were considered to reduce aircraft weight. The need to evaluate effects of fastener installation on 2090-T86 was indicated by a previous study documenting problems due to low short transverse tensile strength. Tests by Boeing installing fasteners into holes using interference fits showed 2090-T86 was more susceptible to damage from fastening than previously reported. Damage consisted of cracks normal to the short transverse direction around the periphery of the fastener hole. This report documents the test program conducted at Boeing.

Adaptive control enables more productive use of high speed numerically controlled milling machines. With adaptive control, machines are programmed for optimum material removal, with the controller automatically reducing the material feed rate when heavy load conditions are encountered. The authors outline advantages of adaptive control and describe their testing technique for determining appropriate values for making maximally effective use of adaptive control.

Implementation of a high speed drill motor with solid carbide drill bits, along with careful attention to all details of the process, has resulted in an extraordinary increase in drill bit life, as well as improvements in cycle time and hole quality. During the implementation of a new wing panel riveting machine for use on the 737NG and 757 models a major goal was to significantly improve the drilling process. The phase out of Freon™ as a coolant/lubricant on existing machines forced changes to the drilling process, which resulted in a significant reduction in drill life, from an average of approximately 1,500 holes per drill to 305 holes. The new process on the new machine has increased the average drill life 11,375% to over 35,000 holes, decreased the drill cycle time by 80%, and improved hole quality.