Search Results

HIGH load-carrying ability and fatigue strength, good embeddabiltty and conformability, and resistance to wear, seizure, and corrosion are factors that sold them on aluminum for bearings, the authors report. Bonded steel backing, they say, makes aluminum bearings even better. Retaining aluminum's good properties, it improves some of its bad points and gives such advantages as: Reduced bearing clearances, compared with those used with solid-aluminum bearings. No life limit in operation below 5000 psi fatigue stress value. Less sensitivity to high oil temperatures. Negligible wear (after 29,000 hr in one test). Simpler and less expensive bearing-locating designs. Special excellence for high-load, high-speed applications.

Gearing load spectra data collected under actual working conditions help a designer predict the fatigue life of power train components. Considerable time was required in the past to collect and reduce these data to a form suitable for design use. A vehicle mounted instrumentation system consisting of a strain gaged shaft, a shaft encoder-slip ring assembly, and an amplitude distribution analyzer, was developed which performs load measurements. At the test's conclusion, it provides a spectrum analysis in printed histogram form.

A new two-speed converter drive, six-speed mechanical drive transmission was designed for a 14 cu yd tractor scraper to provide an efficient and easily controlled power train. Included with a description of the system is a review of the development history, along with a summary of some new features utilized in this design.

A new friction welding process, Caterpillar Inertia Welding, is described in this paper. The two distinguishing characteristics of this form of welding are a continuously decreasing rotational velocity and a continuously changing torque at the weld interface. This enables the forging of many previously “difficult-to-weld” materials, such as superalloys. Such welds also exhibit excellent fatigue properties. Because this process produces high strength bonds in dissimilar materials, the designer is able to create composite parts using the special properties of each material in response to the needs of the design.

The heavy-duty truck industry has seen the need for a change in the concept of transmission design for many years. Several improvements have been made and others attempted, but greater improvement is needed to match the engine's delivery to the vehicle's demand. Driver performance can be improved and fatigue reduced by lowering the effort and skill required to make smooth, consistent starts and ratio changes. This paper discusses a solution to this need in the design and development of a semi-automatic, pneumatically controlled, constant mesh transmission.

A single-shaft, simple-cycle gas turbine engine has been developed to power 200 kw alternators for standby power and for applications where heat is needed. The engine was designed to be sold and serviced by distributors of earthmoving and industrial machinery. Where feasible, design practices of industrial piston engine powered generator sets were incorporated to facilitate installations of combinations of engine types, and to limit novel and unfamiliar features of the basic turbine engine to those that were considered essential. Individual components and complete engines, initially developed by a research group, have been subjected to a wide variety of laboratory tests to measure performance and develop reliability.

Advance in earthmoving technology has made necessary a corresponding advance in cutting edge technology. In adopting the concepts of matching the cutting edge to the machine, or possibly the job requirements of the machine, in rare instances it is found that the cutting edges employed in the 1930's and 1940's are satisfactory; however, in general, the increase in horsepower and carrying capacity of earthmoving machinery has necessitated a vast increase in the strength and wear properties of the cutting edge. The development of these properties, based on academic, laboratory, and field precepts, has advanced hand-in-hand with machine developments.

Two new Caterpillar Wheel Loaders have been developed in the 1.2 cubic meter (1.5 cubic yd.) and 1.5 cubic meter (2.0 cubic yd.) bucket capacity categories. This paper provides a review of the design objectives and summarizes the design features included to meet worldwide manufacturing and marketing requirements.

TRACTORS operate in a wide range of conditions, from desert to swamp. At all times, the final-drive seals must keep the oil in and the dirt out. In this paper, the authors discuss the latest developments in seal design and the resulting improvements in performance. Efficient performance of a tractor final-drive seal depends upon a number of factors, including: bellows and bellows-boot operation, seal load and area, seal material, wear washer, and gasket structures.

Fatigue failure of machine components subjected to high contact pressures is rapidly becoming recognized as a serious design limitation. Confusion has resulted from grouping three distinct types of contact fatigue failure under the term “pitting” A Geared Roller Test Machine is described that reproduced each of the three modes of failure. The stress-life relationships obtained for rollers tested under conditions of rolling plus sliding correlated well with actual gear performance. The sensitivity of the test to changes in material, micorstructure, and processing variables is demonstrated.

A new Caterpillar Wheel Loader has been developed to provide a loader in the 2 cubic meter (2.5 cubic yard) bucket capacity-category. This paper provides a review of the machine design objectives and summarizes the design features included to meet worldwide manufacturing and marketing requirements.

A new 2-ring piston package has been developed which has proven successful in internal combustion engines. The need for a compact piston arrangement is discussed along with the steps followed to arrive at excellent oil economy. The paper presents other advantages related to cost savings, lower wear, and reduced engine friction. The paper discusses applications of the compact piston package along with its advantages in designing compact engines.