Search Results

This paper describes a prediction of vibration and the transfer path analysis (TPA) using an engine multi body dynamics (MBD) model and measured frequency response functions (FRFs). TPA is used in order to analyze each contribution of vibration transfer paths. In the TPA, input forces from vibration source to passive part should be identified accurately. In the traditional TPA, an identification of input forces is done using only experimental results. Therefore, a parametric study to an improvement of a structure or an isolation system is impossible. In this study, the MBD model of engine is constructed, and input forces from engine to mainframe of agriculture machine are predicted. The accuracy of prediction is confirmed, compared with the results from the traditional TPA method. The contribution of each transfer path is analyzed, and the vibration levels of operator position are predicted using the measured FRFs and the simulated input forces.

Road noise is one of the main vehicle interior noises. To minimize this, it is necessary to reveal the vibration characteristics of a rolling tire. Tire vibration has complex behavior due to tire contact with the road and rolling. In an earlier study, we clarified the effect of contact patch restriction for tire vibration characteristics in the non-rolling condition using the tire dynamical model. However, mode shapes were identified with circumferential wave number. Therefore, it is difficult to clarify the effect for tire vibration in the contact and rolling condition. In this paper, we will apply the receptance method, which is used as an analysis of the rotating disc and gear pair for the tire model toward the tire vibration analysis in the contact and rolling condition. Furthermore, the validity of the approach using this method will be verified from comparison with the result of an earlier study.

This paper presents progressive techniques based on the previous SAE papers [1], [2] for vibration transmission analysis (VTA) on finite element (FE) model using Transfer Path Analysis (TPA). The techniques are: 1) a contribution calculation technique for structure with manifold and continuous transfer paths: 2) a visualization technique of the influence degree for efficient derivation of measures for response reduction. In VTA, influence degree of each DOF is calculated based on TPA. In order to understand characteristics of vibration transmission (VT) easily and visually by engineers, magnitude of influence degree is expressed by replacement to magnitude of displacement in the diagram of FE vibration shape. This visualization technique is applied to an automotive body structure. The proposed techniques are applied to automotive body structure consisting of members and panels. The members are such as pillars, cross members and side members, which are the main VT paths.