Search Results

The demand for improved fuel economy in both cars and trucks has emphasized the need for lighter weight components. The application of high strength steel to wheels, both rim and disc, represents a significant opportunity for the automotive industry. This paper discusses the Ranger HSLA wheel program that achieved a 9.7 lbs. per vehicle weight savings relative to a plain carbon steel wheel of the same design. It describes the Ranger wheel specifications, the material selection, the metallurgical considerations of applying HSLA to wheels, and HSLA arc and flash butt welding. The Ranger wheel design and the development of the manufacturing process is discussed, including design modifications to accommodate the lighter gage. The results demonstrate that wheels can be successfully manufactured from low sulfur 60XK HSLA steel in a conventional high volume process (stamped disc and rolled rim) to meet all wheel performance requirements and achieve a significant weight reduction.

This paper describes Programmed Ride Control (PRC), the automatic adjustable shock absorber system designed and patented by Ford Motor Company. The system utilizes low shock absorber damping under normal driving conditions to provide soft boulevard ride, automatically switching to firm damping when required for improved handling. The system's microprocessor control module “learns” where the straight ahead steering wheel position is, allowing the system to respond to absolute steering wheel angle. A closed loop control strategy is used to improve system reliability and to notify the driver in the event of a system malfunction. Fast acting rotary solenoids control the damping rate of the shock absorbers.

A hybrid approach to predict road-induced loads in vehicle structures is presented. The technique involves full vehicle dynamic simulation using measured wheel forces, absolute wheel vertical displacements, and steering angle as input. The wheel vertical displacement is derived from the measured wheel acceleration. This approach avoids the use of tire-road interface modeling. It also improves the conventional loads measuring process with minimum instrumentation and data acquisition. Existing load data from a test vehicle is used to validate this approach. Computed component loads show good agreement with measurements.

This paper presents the application of a proposed fuzzy inference system as part of a stability control design scheme implemented with active steering actuator sets. The fuzzy inference system is used to detect the level of overseer/understeer at the high level and a speed-adaptive activation module determines whether an active front steering, active rear steering, or active 4 wheel steering is suited to improve vehicle handling stability. The resulting model-free system is capable of minimizing the amount of model calibration during the vehicle stability control development process as well as improving vehicle performance and stability over a wide range of vehicle and road conditions. A simulation study will be presented that evaluates the proposed scheme and compares the effectiveness of active front steer (AFS) and active rear steer (ARS) in enhancing the vehicle performance. Both time and frequency domain results are presented.

A new laboratory test for measuring catalyst oxygen storage capacity has been developed. The test accurately predicts catalyst performance on the vehicle during transient A/F excursions and correlates well with vehicle CO and Nox tailpipe emissions. The test was subsequently used to facilitate improved oxygen storage capacity for new Pd-only washcoat formulations.

This paper provides an overview of the dual EGO sensor method for OBD-II catalyst efficiency monitoring. The processes governing the relationship between catalyst oxygen storage, HC conversion efficiency, and rear EGO sensor response are reviewed in detail. A simple physical model relating catalyst oxygen storage capacity and rear EGO sensor response is constructed and used in conjunction with experimental data to provide additional insight into the operation of the catalyst monitor. The effect that the catalyst washcoat formulation has in determining the relationship between catalyst oxygen storage capacity and HC conversion efficiency and its impact on the catalyst monitor is also investigated. Lastly, the effects of catalyst failure mode, fuel sulfur, and the fuel additive MMT on the catalyst monitor's ability to properly diagnose catalyst function are discussed.

Manual Materials Handling has been historically recognized as one of the more prevalent causes for work related lost time injuries. Many manufacturing facilities use Material Handling Systems (lift/ tilt tables, hoists, articulated arms), often to alleviate ‘ergonomic’ stressors as well as to optimize production. If not used appropriately, Material Handling Systems can create new ergonomic concerns, or in some cases increase the physical demands of a job. A strategy designed to optimize the fit between the operator, the appropriate equipment and the operation is addressed in this paper.

Automotive fuel vapor emissions that would otherwise evaporate into the atmosphere are being captured in activated carbon vapor storage canisters. Fuel vapor is loaded into the canisters via a direct connection to the fuel tank vapor dome. Hydrocarbons are desorbed from the activated carbon into the engine combustion cylinders using engine intake vacuum. The carbon canister capacity requirements have increased in recent years in order to meet both Enhanced Evaporative Emission regulations and the Clean Air Act emission requirements for On-board Refueling Vapor Recovery (ORVR). The higher capacity requirements have generated the need for larger volume canisters that can meet the emission requirements and still be designed within the space and packaging limits of the vehicle application. This paper describes the simultaneous engineering approach used at Ford Motor Company to design a large volume cylindrical shaped carbon canister.

There are a number of benefits from Ford Motor Company's participation in motorsports. This paper will describe how an engineering team developed a CAE process to assist in the design of a race car to meet impact requirements, with the technology transfer benefit of improved impact performance of composite structures in passenger cars. In 1997/98, a CAE process was developed and applied in the design and test of Formula One race car composite impact structures. For this particular engineering effort, a Ford proprietary software program, COMP-COLLAPSE, was the primary analysis tool that was utilized to successfully predict impact performance. As a result, COMP-COLLAPSE was used extensively in the design of race car composite impact structures. There were two beneficiaries from this effort: Race Vehicles: Improved vehicle impact performance as well as design improvement in crush efficiency, packaging, weight, and manufacturing.

Automotive display designers are faced with the task of providing more information to the driver through the implementation of an increased amount of on-board vehicle electronic systems. Package space in and around the instrument panel however, is at a premium. One remedy to this situation is the implementation of a dot matrix display with enough flexibility to fulfill several potential applications. Once a dot matrix display is integrated into a vehicle, information can be reformatted for presentation to the driver without redesigning the display device or its associated electronics. The system designer can then concentrate development resources on the remaining display subsystem components and issues such as user interface, display lighting, and packaging requirements for a specific application.

This paper describes the development of an analytical tool for the design automation of the temperature blend door mechanism in an automotive HVAC system. The function of the blend door is to control the temperature of the air blown into the cabin interior by regulating the mix of air passing through the heater core. The objective in the design process is to achieve a prescribed function of temperature with respect to control position at the instrument panel. The control effort to effect the desired temperature change is also another important consideration for customer satisfaction. The current design process is empirical in nature and relies on laboratory and vehicle testing with prototypes. The process is also iterative in nature and may continue until the end of the overall design cycle of the complete air handling subsystem. A parametric feature-based computer model, described subsequently in detail, allows for virtual prototyping of the blend door control mechanism.

The history, system philosophy, design evolution, and performance of the Sure-Track anti-lock automotive braking system are presented and discussed. Considerations of performance, driver skill, reliability, and commercial acceptance resulted in the choice of a vacuum-electronic rear wheel anti-lock system that incorporates individual wheel speed sensing and control of braking as a pair. The system provides superior directional stability under “panic” braking conditions while maintaining stopping distance equal to or shorter than those for locked wheels under most road conditions.

Discussion of four factors pertinent to any overall ride evaluation. These factors are frame beaming, fifth wheel location, special body mountings, and variable loading conditions on tandem truck and tractor ride. The methodology for measuring the characteristics of these factors is reviewed and practical solutions for improved ride are given.

This paper describes a study which was carried out to assess the potential for using a gasoline burner to heat the catalytic convertor during cold start. The results showed the catalyst/burner concept to be a promising LEV/ULEV capable technology. On a 1993 Ford Grand Marquis equipped with a catalyst burner system, catalyst light-off was achieved in less than 15 seconds while cold start HC emissions during the first 60 seconds of the FTP test were reduced by 60%. In addition, data are presented which compare the performance of the catalyst/burner to an electrically heated catalyst. In the tests performed, the catalyst/burner system out performed the EHC. Practical considerations, however, such as safety, durability, system integration, and packaging still need to be addressed.

Here we present a latent heat storage device which is used to provide “quick/supplemental” heat to the vehicle's conventional heating system. First, we present data from actual in-vehicle cold weather tests. Data are presented for heater and defroster performance tests, emissions tests and cold start tests after extended soaks. Secondly, heater performance predictions are made using a computer simulation program. Finally, the actual heater performance results are compared with the computer simulation.

A laboratory flow reactor test has been developed to examine hydrocarbon (HC) storage for diesel catalysts. Light-off testing alone has not been sufficient to rank diesel oxidation catalysts (DOCs) in agreement with vehicle HC conversions over the European driving cycle. HC emissions are important because of Stage II combined HC+NOx standard. During cold start and much of the ECE driving cycle, inlet catalyst temperatures on diesel passenger cars spend much time below 200°C. This is where more than half of the HC mass can be emitted. To be effective, DOCs must achieve sufficiently low HC light-off temperatures, or incorporate materials such as zeolites that trap HC until light-off is achieved. Consideration of both HC storage and light-off results together improve ranking of DOCs similar to vehicle ranking. Three supplier DOCs have been evaluated.

Computer simulation technology coupled with indoor laboratory facilities is being used in the automotive industry to provide up-front assessment of vehicle performance. This paper presents a technique to evaluate passenger vehicle tire wear performance as related to suspension and tire design early in the design process. Motivation for developing this tool is to optimize suspension and tire design to tire wear early in the design process. This approach has resulted in reductions in vehicle development time, dependency on outdoor testing and the need for expensive prototype vehicles. A full vehicle ADAMS model of a production vehicle is used to animate vehicle suspension kinematic motions, and dynamic tire forces of vehicle maneuvers for a preselected outdoor tire wear route. Time histories of five vehicle parameters are generated: radial force, slip angle or lateral force, camber, velocity and driving and braking torques.

The flexibility, high performance, and cost benefits of microprocessors have been effectively applied to the field of automotive emissions testing. This paper describes the use of microprocessors in drivers aid, SHED testing, dynamometer coast down calibration and vehicle storage techniques. The successful implementation of microcomputers into emissions measurement systems have provided the automotive industry with a cost-effective, powerful and dependable tool for use in meeting the increasingly stringent emissions and fuel economy testing requirements for the 80's and beyond.

This project developed and evaluated a catalyst system for oxides of nitrogen control to achieve target reduction levels established for the Inter-Industry Emission Control (IIEC) Program, with concurrent control of the hydrocarbons and carbon monoxide. The major effort described is the evaluation of catalysts and the development of a suitable exhaust gas-temperature environment. The objective was met, with the exception of long-term durability, by using a pelleted, nonnoble metal catalyst and a special container design.

This paper summarizes results from a large study on the release of NOx from a lean NOx trap during rich purges. Under certain purge conditions, some NOx trap formulations have the propensity to release some of the NOx stored during previous lean operation without reducing it. This purge NOx release was examined for different NOx trap formulations. The purge NOx release was evaluated for one of the formulations as a function of several variables, including the aging condition of the trap, the trap temperature, the trap volume, the purge A/F ratio, the purge flow rate, and the amount of NOx stored. The effect of hot lean pretreatments on the purge NOx release was studied. In addition, the effect of the rhodium level on the purge NOx release was examined. Mechanisms for the NOx release are proposed that are consistent with the observed data. The results indicate that the purge NOx release is very low for thermally aged traps and is primarily a concern for fresh or stabilized traps.