Search Results

This paper reports on the development of a new methodology for OBD-II catalyst efficiency monitoring. Temperature measurements taken from the center of the catalyst substrate or near the exterior surface of the catalyst brick were used in conjunction with macroscopic energy balances to calculate the instantaneous rate of exothermic energy generation within the catalyst. The total calculated rate of exothermic energy release over the FTP test cycle was within 10% of the actual or theoretical value and provided a good indicator of catalyst light-off for a variety of aged catalytic converters. Normalization of the rate of exothermic energy release in the front section of the converter by the mass flow rate of air inducted through the engine was found to provide a simple yet practical means of monitoring the converter under both FTP and varying types of road driving.

This paper summarizes some of the research which has been carried out at Ford Motor Co. in the area of NOx traps. Results from a large body of experimental work are reviewed and used to provide insight into the fundamental processes which govern NOx trap performance. In particular, the key parameters which control thermal durability and sulfur poisoning of the NOx trap are discussed in detail. In addition, a theoretical model of the NOx trap is described and used in the analysis and interpretation of the experimental results.

The effect of MMT on the OBD-II catalyst efficiency monitor has been investigated. The results conclusively show that manganese which is deposited onto the catalyst during the combustion of MMT- containing fuel provides for an increased level of catalyst oxygen storage capacity. This added oxygen storage was found to result in a reduced rear EGO sensor response and caused malfunctioning catalysts to be incorrectly diagnosed by the OBD-II catalyst efficiency monitor.

The pulse flame combustor was adapted by researchers at Ford Motor Company in the early 1970s in order to produce exhaust gas simulating the combustion products of the internal combustion engine for the evaluation of automotive catalysts. Over the years, the pulse flame combustor has found application in a wide variety of research oriented tasks associated with automotive catalysts and emissions. More recent research and development efforts which have resulted due to elevated demands toward lower vehicle emission levels have prompted continuing refinements of the apparatus and effected innovative approaches to the study of emerging automotive catalyst and emission control issues with the pulse flame combustor. This report provides an overview of the operation and design evolution of the pulse flame combustor. In addition, recent applications of this laboratory device for studying automotive catalysts, alternative fuels, and other automotive emission control topics are reviewed.