Search Results

Past studies have shown that NVH CAE tire model quality is not adequate to correctly capture a mid-frequency range (100-300 Hz). A new methodology has been developed to estimate tire forces that are independent of dynamic characteristics of vehicle suspension and rig test fixture. The forces are called tire blocked forces and defined as a force generated by a tire/wheel system whose boundary condition is constrained. The tire blocked force is estimated by removing the dynamic effect of the tire force measurement fixture. The blocked forces can be applied to CAE models to predict vehicle road NVH responses. This new method can also be used as a target setting tool. Tire suppliers can check the blocked tire forces from the rig testing data against a force target before they submit tires to automotive manufacturers for evaluations on a prototype vehicle.

An enhanced, frequency domain filtered-x least mean square (LMS) algorithm is proposed as the basis for an active control system for treating powertrain noise. There are primarily three advantages of this approach: (i) saving of computing time especially for long controller’s filter length; (ii) more accurate estimation of the gradient due to the sample averaging of the whole data block; and (iii) capacity for rapid convergence when the adaptation parameter is correctly adjusted for each frequency bin. Unlike traditional active noise control techniques for suppressing response, the proposed frequency domain FXLMS algorithm is targeted at tuning vehicle interior response in order to achieve a desirable sound quality. The proposed control algorithm is studied numerically by applying the analysis to treat vehicle interior noise represented by either measured or predicted cavity acoustic transfer functions.

The exhaust system is one of the major P/T systems for sound quality tuning. The many varieties in exhaust pipe routing and the flexibility in muffler design make it possible to design an exhaust system to deliver tailpipe sound for specific sound quality requirements. It is essential that the tailpipe sound be balanced with other P/T sound to yield the overall sound targets. The primary contribution of an exhaust system is the firing and sub-firing orders. The typical tailpipe sound target contains banded targets for “good” orders as well as “do-not-exceed” targets for the rest. Every order target needs to be met in order to yield the right tailpipe sound. In most cases, the pipe routing and the muffler volumes of mufflers are dictated by package constraints, however, the internal design of muffler with a given volume can create quite different tailpipe sounds.

A method to create a CAE load by utilizing the vibration motions at structure attachments has been developed. This method employs the concept of enforced motion as the constraints of boundary conditions to create an equivalent input force/moment matrix for a sub-structure with multi-point attachments. The main assumption is that motions at the attachments of the sub-structure should be the same as the known motions of the main structure under the generated input load. The key concept of the developed methodology is the calculation of the input dynamic compliance matrix for sub-structure attachment locations. This method is developed to create a system level input load to be used for squeak and rattle CAE analysis on a component or sub-system. It can also be used for minor component design change evaluation using only the component CAE model, yet as if it is assembled in the vehicle.