Search Results

The high level of reliability of virtual analysis for suspension system development should not be thinking only for comfort and performance purpose, considering the `growing number of failures due to the touch between components in dynamic condition. The study establishes a simple and optimized methodology, able to predict more accurately the flexible brake hose path subject to the steering motion and associates with the independent suspension course, aiming the best route in order to achieve a low cost and robust design. In turn, the flexible brake hose non-linear model invalidates the multibody study to get the best route. However, with the aid of motion making use of NX9 [1] CAD [2] software was prepared dynamic movement that subjects front independent suspension system that establishes a Cartesian routine that maps 977 points, much higher than 9 points from previous studies, comprising a more accurate path performed by the hose.

In a growing global environment, new products development demands balancing regional requirements and resources in the proposed solutions targeting optimal results. The interaction between Development Centers must pursue, following clearly defined rules, proposals that consider factors from all involved regions. This paper proposes description of important aspects to be considered in Car Suspension Global Product Developments.

The purpose of this study is to establish the criteria of election of an electrical architecture tailor-made for the emerging markets, to be applied during the whole vehicle's lifecycle. A literature review about related subjects as the meaning of "electrical architecture," its techniques, criteria and methodologies of development, and the definitions of emerging and developed markets is also presented. Based on the bibliographical research, documentary analysis and unstructured interviews with active members of the automotive industry, the criteria for election of electrical architectures for emerging markets was established, as well as their describers and swing-weights, required by the use of the additive aggregation method - a multi-criteria decision taking method. The criteria were applied in two case studies of automotive industry: the developments of a low-cost hatch vehicle and a mid-size luxury sedan vehicle, both designed for emerging markets.

Over recent years, demands for fuel-efficient vehicles have increased with the rise of the fuel price and public concerns on environment. Recently, application of lightweight materials is increasing in the automobile industry in order to improve mass reduction and consequently fuel efficiency. On this particular study, with a goal of developing a Lightweight Fixed Steering Column, it was identified an opportunity to replace fixed steering column metallic upper and lower brackets by polymeric material. In order to fulfill NVH, Crash, Durability and Performance requirements, a DFSS methodology has been applied. As a result, It was achieved ∼51% of mass reduction, ∼10% of performance improvement with ∼14% of cost increase.

Development of an Electrical Power Steering (EPS) system for Emergent Markets, with emphasis on improved fuel economy and cost advantages to the customer. The EPS for Emergent Markets provides high steering wheel assistance on parking maneuvers and appropriate assistance on driving conditions similar to conventional EPS systems. The assistance levels decreases while vehicle speed increases providing better steering feel at high speed conditions (highway tracks). It also provides good tuning capability balanced with piece cost. In addition, this EPS enables an aftermarket bolt-on system for non-assisted steering vehicles (i.e., manual steering vehicles).

Vehicular manual transmissions systems often use a vent or breather to allow pressure control inside the main structure. This pressure variation comes along with differences caused by working temperature range. However along with air flow these vents may occasionally allow oil passage noticed by vehicle owner as a transmission leakage event. The more sophisticated the more expensive is the venting device which may contain membranes, labyrinths, baffles and other solutions to avoid leakage. The purpose of this paper is to present a simplified solution to avoid transmission fluid leakage by combining a regular sealing device (fiber concept gasket) and a baffle to avoid oil splash to reach the venting device. The proposed concept took into consideration a quick implementation aspect, low financial impact and less complexity to the overall current system modifying an existing component by adding secondary function instead of creating additional components.

The growing need to avoid failures in vehicle components have become the methods of quality control of manufacturing processes more efficient and accurate, especially in safety components like automotive wheels. The aim of this work is examines the efficiency of aluminum-silicon specifications related to wheel quality for avoiding the poor results obtained in impact and fatigue tests as result of improper settings in the chemical composition and manufacture process. It is evaluated mainly the content of magnesium in aluminum alloys and certified the correct degree of silicon modification in the microstructure on the performance of these wheels. The test results indicate that even with the chemical composition parameters specified by the standard, the technical validation of the product may not be adequate.

Product Design is a process of creating new product by an organization or business entity for its customer. Being part of a stage in a product life cycle, it is very important that the highest level of effort is being put in the stage. The Design for Six Sigma (DFSS) methodology consists of a collection of tools, needs-gathering, engineering, statistical methods, and best practices that find use in product development. DFSS has the objective of determining the needs of customers and the business, and driving those needs into the product solution so created. In this paper the DFSS methodology is employed to develop the optimal solution to enhance sound transmission loss in a vehicle front of dash pass-through. An integrated approach using acoustic holography and beamforming Noise Source Identification (NSI) techniques is presented as a manner to improve sound insulation during vehicle development.

The automotive competition is growing every day, and automotive products (vehicles and components) are often developed in one country though it's made based on o global architecture, used and applied in other markets, and with the high competition between automakers, engineers can not afford make mistakes during the product development mainly in global architectures. Be the customer or put yourself in the customer's place is the key to good product planning, design, development, and also, marketing, therefore to understand exactly what the customers are complaining about on the current products to consider this lessons learned on the new products the Genchi Genbutsu is key tool to find the root cause of any problem which is the key to a lasting solution and a successful product development. The article describes some successful steps to apply the Genchi Genbutsu during the automotive product development.

In the automotive industries, time and parts production costs are fundamental, mainly in prototyping production. The RTV (Room Temperature Vulcanized) process is an important alternative production to flexible silicone molds when you need to inject polyurethane parts. The objective is time reduction in tooling production and parts. RTV requires notable initial investments in equipments. Many times, this cost does not fit in the automotive third part company's budget. This work shows how is possible to obtain parts by RTV process with excellent quality, without high investments in equipments and without quality loss in produced parts. Lead times and tooling and parts costs are analyzed. Due to equipments low costs, this alternative is accessible not only to automotive industries but also to small and medium suppliers.

Reliability, maintainability/serviceability and security are three qualities of product excellence desired by customers and users of products, however customer expectation for product reliability are continually increasing for almost all product and despite of most of the companies has worked on the philosophy of continuous improvement to meet or exceed the customer's expectations, its difficult to avoid failures or its difficult to ensure zero defect. Once it happens, it generate a customer complaint which is registered by companies. The way that companies used to register the complaints is through their warranty system and also a special database. Most of the companies maintain warranty databases for purposes of financial reporting and warranty expense forecasting. In some cases, there are attempts to extract engineering information from such databases. Another application is to use warranty data to detect potentially serious field reliability problems as early as possible.

The current study shows important results obtained by a new technique of residual stress virtual evaluation in automotive components for improving the development and quality of new products, aiming the structural performance, mass and cost reductions. The approaching those virtual results were adjusted by metallurgic data obtained in metallography, mechanical and chemical analysis. As part of this proposal, an automotive aluminum wheel belong to current production was evaluated in accordance with data acquired in the wheel manufacturing process. It was taking in account the real information of casting process parameters and the metallurgic information obtained in laboratorial tests. In this work, the results show that product residual stresses shall be considerate and evaluated during design phases as improving proposal, new technical concerns and quality improving.

Manual steering is largely employed on emergent markets and it demands high level performance to be competitive. To achieve customer satisfaction, it is important to understand physically and be able to quantify what is good performance regarding imperative steering aspects. Nevertheless, global projects and quality management require objective measurements and reference numbers. The strategy defining the measurements in order to compare among development steps and benchmark must be studied carefully. Objective measurements and subjective evaluation correlation is necessary to define the reference data. In this project, several cars were evaluated and measured performing standard maneuvers. The maneuvers were performed to obtain appropriated and enough information to understand the performance and to do the correlation. The subjective evaluation was normalized and; using objective data, parameters were calculated to represent properly and in a robust form the driver fills.

Through computational dynamic simulations is possible to achieve high reliability index in the development of automotive components, thus reducing the time and component cost can generate significant levels of competitiveness and quality. This work suggests the validation of a methodology for simulation, able to predict and quantify the best design of the parking brake cable that although it is flexible, has in its structure composite elements of different mechanical properties. Known difficulty of mathematically predict nonlinear relationships deformation under forces and moments effect was first established, studies based on experimental measurements serve as input parameters for simulating the dynamic behavior of the flexible cable. With the aid of motion making use of NX9 CAD software, it was prepared the dynamic movement that the leaf spring suspension system does.

Through computational dynamic simulations is possible to achieve high reliability index in the development of automotive components, thereby enabling the reduction of cost and time of a product development with considerable gain in quality. This work suggests the validation of a methodology for simulation where is possible to improve the confidence level for design flexible components, such Heater and Cooling hoses that are under dynamic engine action, in relation to the physical model. Known the difficulty in predicting non-linear mathematical relationship deformation under effect of forces and moments, was established a study based on experimental measurements where were used as input parameters to simulate the dynamic behavior of flexible components, in this case, coolant hoses.

Nowadays the automotive market is reducing product development time and launching more technological vehicles, always focusing on having even more safety with better customer experience which generates big competitiveness and requires more accurate and faster development, the virtual simulations make it possible to meet this new reality with a high confidence level. This work comprises the validation of a methodology to analyze the design confidence level for flexibles associated with suspension kinematics. To validate the methodology, the scanned physical model was compared with the virtual simulations using the Simcenter 3D Flexible Pipe software. As inputs data for simulation, it is used geometrical, physical, and chemical information. Through the suspension kinematics study was establish possible movement situations to obtain the flexibles deformations attending to all suspension positions.

This paper proposes a methodology for automotive manufacturing lines scheduling. This methodology is based on generalized stochastic Petri Nets and Markov decision processes with imprecise probabilities. The usual generalized stochastic Petri Nets is extended by allowing imprecision about probabilities to be explicitly represented and by human task time graph of different products to be attached. Once the system is modeled using this tool and its extensions, we translate the resulting models into Markov decision processes with imprecise probabilities, in order to compute optimal policies that will result in the line scheduling. This paper introduces an algorithm that performs this translation.

The present work gives an overview of the current situation of failures that may occur in automotive components, showing their distribution in the vehicle and the causes that make them occur, trying to emphasize the different materials which are used in the manufacturing of these components. This work is a technical approach strictly supported by an engineering concept which aims to discuss the different factors which contribute to cause premature failures of automotive components, prior to their utilization in the field or when they are exposed to the most variable conditions of use. One of the most important objectives of this study is to call the attention of design engineers, research engineers and manufacturing people to the importance of the components integrity which shall be taken into primary consideration in the design phase as well as in the specification of the material and process of manufacturing.

The purpose of the theme developed in this work is to increase the volume of information related to vehicle evaluation and how human perception can be translated into numbers, thus facilitating the process of definitions, refinement and analysis of its performance. Based on the discipline of psychophysics, where it is possible to study the relationship between stimulus and sensation and the use of post processing tool known as PSD (Power Spectral Density), post process the acceleration data of inputs perceived by the occupants of the vehicle, when driving in routes considered ergodic. By this, in a summarized way, get to human subjective perception of comfort. This material shows in a conceptual way a sequence of studies that were conducted to make it possible, to generate a performance classification of the subjective vehicle attribute of Smoothness, by processing values of acceleration measured the driver's seat.

This work presents aspects related to research and development of high-speed steels for valve seat inserts application. Five series of materials were evaluated: high speed steel M3/2 infiltrated with copper during sintering; high speed steel M3/2 with Cu3P addition; high speed steel M3/2 with Cu3P addition and further copper infiltrated during sintering; high speed steel M3/2 mixed with iron powder; high speed steel M3/2 mixed with iron powder and niobium carbide. The physical and mechanical properties of the evaluated high-speed steels are presented in terms of densification, hardness, and radial mechanical strength. These properties are compared according to the materials processing and heat treatment.