Search Results

The influence of engine load and fuel premixing ratio (PMR) on unregulated emission from a methanol-diesel dual-fuel RCCI (MD-RCCI) engine is examined in this study. The study focuses on assessing the adverse effects of unregulated emissions (saturated HC, unsaturated HC, carbonyl compounds, aromatic hydrocarbon, NH3, and SO2) on the health of human beings and the environment. To quantify the effect on the environment, the greenhouse gas potential (GWPs), Eutrophication potential (EP), Acidification potential (AP), and Ozone forming potential (OFP) are calculated and presented. The cancer risk potential (CRP) of the carbonyl compounds (HCHO and CH3CHO) is calculated and presented to see the effect on human health. The results demonstrate that at lower engine load, with an increase in PMR, the OFP and CRP for MD-RCCI operation increase significantly, whereas AP, EP, and GWPs decrease. Additionally, with a rise in the load at a constant PMR, the AP, EP and OFP decrease significantly.

In the present work, the in-cylinder tumble/swirl flow and its effect on the homogeneity, turbulence, and combustion of methane are investigated in a canted valve engine using ANSYS. The study is focused on the impact of initial swirl and tumble on the charge preparation, turbulent kinetic energy, and combustion of methane. The flow simulation was performed in ANSYS using hybrid mesh for cold flow simulation to study the tumble/swirl flow variation. For combustion simulation, a 2D axisymmetric model was used with an initial swirl and tumble ratio for studying the effect on premixed combustion. The flow simulation was performed for suction and compression to see the variation in the swirl and tumble with crank position and engine speed. The combustion simulation was performed only for compression and power stroke to save the computation time. The results depict that the flow inside the cylinder plays a significant role in the preparation of a homogeneous charge.

Homogeneous charge compression ignition (HCCI) engines are attracting attention as next-generation internal combustion engines mainly because of very low NOx and PM emission potential and excellent thermal efficiency. Particulate emissions from HCCI engines have been usually considered negligible however recent studies suggest that PM number emissions from HCCI engines cannot be neglected. This study is therefore conducted on a modified four cylinder diesel engine to investigate this aspect of HCCI technology. One cylinder of the engine is modified to operate in HCCI mode for the experiments and port fuel injection technique is used for preparing homogenous charge in this cylinder. Experiments are conducted at 1200 and 2400 rpm engine speeds using gasoline, ethanol, methanol and butanol fuels. A partial flow dilution tunnel was employed to measure the mass of the particulates emitted on a pre-conditioned filter paper.