Search Results

Tire tread separation events, a category of tire disablements, can be sub-categorized into two main types of separations. These include full tread separations, in which the tread around the entire circumference of the tire separates from the tire carcass, and partial tread separations, in which a portion of the tread separates and the flap remains attached to the tire for an extended period of time. In either case, the tire can remain inflated or lose air. Relatively, there have been few partial tire tread separation tests presented in the literature compared to full tread separation tests. In this study, the results of 25 full and partial tire tread separation tests, conducted with a variety of vehicles at highway speeds, are reported. Cases in which the tire remains inflated and loses air pressure are both considered. The testing was performed on a straight section of road and primarily focused on rear tire disablements.

This paper presents a comprehensive literature review of original equipment event data recorders (EDR) installed in passenger vehicles, as well as a summary of results from the instrumented validation studies. The authors compiled 187 peer-reviewed studies, textbooks, legal opinions, governmental rulemaking policies, industry publications and presentations pertaining to event data recorders. Of the 187 total references, there were 64 that contained testing data. The authors conducted a validation analysis using data from 27 papers that presented both the EDR and corresponding independent instrumentation values for: Vehicle velocity change (ΔV) Pre-Crash vehicle speed The combined results from these studies highlight unique observations of EDR system testing and demonstrate the observed performance of original equipment event data recorders in passenger vehicles.

Video and photo based photogrammetry software has many applications in the accident reconstruction community including documentation of vehicles and scene evidence. Photogrammetry software has developed in its ease of use, cost, and effectiveness in determining three dimensional data points from two dimensional photographs. Contemporary photogrammetry software packages offer an automated solution capable of generating dense point clouds with millions of 3D data points from multiple images. While alternative modern documentation methods exist, including LiDAR technologies such as 3D scanning, which provide the ability to collect millions of highly accurate points in just a few minutes, the appeal of automated photogrammetry software as a tool for collecting dimensional data is the minimal equipment, equipment costs and ease of use.

Accidents involving heavy trucks turning left across travel lanes of a roadway are common subjects of investigation in the field of accident reconstruction. The distance traversed during a turn and lateral and tangential accelerations of the left turning heavy truck can be used to model its motion and determine timing as it relates to a collision. As a follow up to the 2019 SAE Accident Reconstruction section paper by the authors (2019-01-0411), this paper will investigate the longitudinal and lateral accelerations of heavy trucks during small, medium, and large radius turns and analyze peak and average lateral accelerations as they relate to turn radius and vehicle speeds. This study analyzed 70 tractor-trailers, 19 straight trucks and 15 bobtail tractors for a total of 104 heavy trucks.

Forensic disciplines are called upon to locate evidence from a single camera or static video camera, and both the angle of incidence and resolution can limit the accuracy of single image photogrammetry. This research compares a baseline of known 3D data points representing evidence locations to evidence locations determined through single image photogrammetry and evaluates the effect that object resolution (measured in pixels), and angle of incidence has on accuracy. Solutions achieved using an automated process where a camera match alignment is calculated from common points in the 2D imagery and the 3D environment, were compared to solutions achieved in a more manual method by iteratively adjusting the camera’s position, orientation, and field-of-view until an alignment is achieved. This research independently utilizes both methods to achieve photogrammetry solutions and to locate objects within a 3D environment.

PC-Crash is a vehicular accident simulation software that is widely used by the accident reconstruction community. The goal of this article is to review the prior literature that has addressed the capabilities of PC-Crash and its accuracy and reliability for various applications (planar collisions, rollovers, and human motion). In addition, this article aims to add additional analysis of the capabilities of PC-Crash for simulating planar collisions and rollovers. Simulation analysis of five planar collisions originally reported and analyzed by Bailey [2000] are reexamined. For all five of these collisions, simulations were obtained with the actual impact speeds that exhibited excellent visual agreement with the physical evidence. These simulations demonstrate that, for each case, the PC-Crash software had the ability to generate a simulation that matched the actual impact speeds and the known physical evidence.

Photogrammetry and the accuracy of a photogrammetric solution is reliant on the quality of photographs and the accuracy of pixel location within the photographs. A photograph with lens distortion can create inaccuracies within a photogrammetric solution. Due to the curved nature of a camera’s lens(s), the light coming through the lens and onto the image sensor can have varying degrees of distortion. There are commercially available software titles that rely on a library of known cameras, lenses, and configurations for removing lens distortion. However, to use these software titles the camera manufacturer, model, lens and focal length must be known. This paper presents two methodologies for removing lens distortion when camera and lens specific information is not available. The first methodology uses linear objects within the photograph to determine the amount of lens distortion present. This method will be referred to as the straight-line method.

Small unmanned aerial systems have gained prominence in their use as tools for mapping the 3-dimensional characteristics of accident sites. Typically, the process of mapping an accident site involves taking a series of overlapping, high resolution photographs of the site, and using photogrammetric software to create a point cloud or mesh of the site. This process, known as image-based scanning, is explored and analyzed in this paper. A mock accident site was created that included a stopped vehicle, a bicycle, and a ladder. These objects represent items commonly found at accident sites. The accident site was then documented with several different unmanned aerial vehicles at differing altitudes, with differing flight patterns, and with different flight control software. The photographs taken with the unmanned aerial vehicles were then processed with photogrammetry software using different methods to scale and align the point clouds.

When a vehicle with protruding wheel studs makes contact with another vehicle or object in a sideswipe configuration, the tire sidewall, rim and wheel studs of that vehicle can deposit distinct geometrical damage patterns onto the surfaces it contacts. Prior research has demonstrated how relative speeds between the two vehicles or surfaces can be calculated through analysis of the distinct contact patterns. This paper presents a methodology for performing this analysis by visually modeling the interaction between wheel studs and various surfaces, and presents a method for automating the calculations of relative speed between vehicles. This methodology also augments prior research by demonstrating how the visual modeling and simulation of the wheel stud contact can extend to almost any surface interaction that may not have any previous prior published tests, or test methods that would be difficult to setup in real life.

This paper reports testing and analysis of the braking and swerving capabilities of on-road, three-wheeled motorcycles. A three-wheeled vehicle has handling and stability characteristics that differ both from two-wheeled motorcycles and from four-wheeled vehicles. The data reported in this paper will enable accident reconstructionists to consider these different characteristics when analyzing a three-wheeled motorcycle operator’s ability to brake or swerve to avoid a crash. The testing in this study utilized two riders operating two Harley-Davidson Tri-Glide motorcycles with two wheels in the rear and one in the front. Testing was also conducted with ballast to explore the influence of passenger or cargo weight. Numerous studies have documented the braking capabilities of two-wheeled motorcycles with riders of varying skill levels and with a range of braking systems.

This paper presents a methodology for accurately representing dawn and dusk lighting conditions (twilight) through photographs and video recordings. Attempting to generate calibrated photographs and video during twilight conditions can be difficult, since the time available to capture the light changes rapidly over time. In contrast, during nighttime conditions, when the sun is no longer contributing light directly or indirectly through the sky dome, matching a specific time of night is not as relevant, as man-made lights are the dominate source of illumination. Thus, the initial setup, calibration and collection of calibrated video, when it is dark, is not under a time constraint, but during twilight conditions the time frame may be narrow. This paper applies existing methods for capturing calibrated footage at night but develops a method for adjusting the footage in the event matching an exact time during twilight is necessary.

Collision statistics show that more than half of all pedestrian fatalities caused by vehicles occur at night. The recognition of objects at night is a crucial component in driver responses and in preventing nighttime pedestrian accidents. To investigate the root cause of this fact pattern, Richard Blackwell conducted a series of experiments in the 1950s through 1970s to evaluate whether restricted viewing time can be used as a surrogate for the imperfect information available to drivers at night. The authors build on these findings and incorporate the responses of drivers to objects in the road at night found in the SHRP-2 naturalistic database. A closed road outdoor study and an indoor study were conducted using an automatic shutter system to limit observation time to approximately ¼ of a second. Results from these limited exposure time studies showed a positive correlation to naturalistic responses, providing a validation of the time-limited exposure technique.

Accurately reconstructing the speed of a yawing and braking vehicle requires an estimate of the varying rates at which the vehicle decelerated. This paper explores the accuracy of several approaches to making this calculation. The first approach uses the Bakker-Nyborg-Pacejka (BNP) tire force model in conjunction with the Nicolas-Comstock-Brach (NCB) combined tire force equations to calculate a yawing and braking vehicle's deceleration rate. Application of this model in a crash reconstruction context will typically require the use of generic tire model parameters, and so, the research in this paper explored the accuracy of using such generic parameters. The paper then examines a simpler equation for calculating a yawing and braking vehicle's deceleration rate which was proposed by Martinez and Schlueter in a 1996 paper. It is demonstrated that this equation exhibits physically unrealistic behavior that precludes it from being used to accurately determine a vehicle's deceleration rate.

There are numerous publically available smart phone applications designed to track the speed and position of the user. By accessing the phones built in GPS receivers, these applications record the position over time of the phone and report the record on the phone itself, and typically on the application’s website. These applications range in cost from free to a few dollars, with some, that advertise greater functionality, costing significantly higher. This paper examines the reliability of the data reported through these applications, and the potential for these applications to be useful in certain conditions where monitoring and recording vehicle or pedestrian movement is needed. To analyze the reliability of the applications, three of the more popular and widely used tracking programs were downloaded to three different smart phones to represent a good spectrum of operating platforms.

Computer simulation of nighttime lighting in urban environments can be complex due to the myriad of light sources present (e.g., street lamps, building lights, signage, and vehicle headlamps). In these areas, vehicle headlamps can make a significant contribution to the lighting environment 1 , 2 . This contribution may need to be incorporated into a lighting simulation to accurately calculate overall light levels and to represent how the light affects the experience and quality of the environment. Within a lighting simulation, photometric files, such as the photometric standard light data file format, are often used to simulate light sources such as street lamps and exterior building lights in nighttime environments. This paper examines the validity of using these same photometric file types for the simulation of vehicle headlamps by comparing the light distribution from actual vehicle headlamps to photometric files of these same headlamps.

Improvements in computer image processing and identification capability have led to programs that can rapidly perform calculations and model the three-dimensional spatial characteristics of objects simply from photographs or video frames. This process, known as structure-from-motion or image based scanning, is a photogrammetric technique that analyzes features of photographs or video frames from multiple angles to create dense surface models or point clouds. Concurrently, unmanned aircraft systems have gained widespread popularity due to their reliability, low-cost, and relative ease of use. These aircraft systems allow for the capture of video or still photographic footage of subjects from unique perspectives. This paper explores the efficacy of using a point cloud created from unmanned aerial vehicle video footage with traditional single-image photogrammetry methods to recreate physical evidence at a crash scene.

In a 2012 paper, Brach, Brach, and Louderback (BBL) investigated the uncertainty that arises in calculating the change in velocity and crush energy with the use of the CRASH3 equations (2012-01-0608). They concluded that the uncertainty in these values caused by variations in the stiffness coefficients significantly outweighed the uncertainty caused by variations in the crush measurements. This paper presents a revised analysis of the data that BBL analyzed and further assesses the level of uncertainty that arises in CRASH3 calculations. While the findings of this study do not invalidate BBL's ultimate conclusion, the methodology utilized in this paper incorporated two changes to BBL's methodology. First, in analyzing the crash test data for several vehicles, a systematic error that is sometimes present in the reported crush measurements was accounted for and corrected.

Previous studies have reported and validated equations for calculating the lean angle required for a motorcycle and rider to traverse a curved path at a particular speed. In 2015, Carter, Rose, and Pentecost reported physical testing with motorcycles traversing curved paths on an oval track on a pre-marked range in a relatively level parking lot. Several trends emerged in this study. First, while theoretical lean angle equations prescribe a single lean angle for a given lateral acceleration, there was considerable scatter in the real-world lean angles employed by motorcyclists for any given lateral acceleration level. Second, the actual lean angle was nearly always greater than the theoretical lean angle. This prior study was limited in that it only examined the motorcycle lean angle at the apex of the curves. The research reported here extends the previous study by examining the accuracy of the lean angle formulas throughout the curves.

When reconstructing collisions involving left turning vehicles at intersections, accident reconstructionists are often required to determine the relative timing and spacing between two vehicles involved in such a collision. This time-space analysis frequently involves determining or prescribing a path and acceleration profile for the left turning vehicle. Although numerous studies have examined the straight-line acceleration of vehicles, only two studies have presented the tangential and lateral acceleration of left turning vehicles. This paper expands on the results of those limited studies and presents a methodology to automatically detect and track vehicles in a video file. The authors made observations of left turning vehicles at three intersections. Each intersection incorporated permissive green turn phases for left turning vehicles.