Search Results

During the conceptualization of vehicle, it is big challenge for automotive manufacturer to design a vehicle which has an excellent aesthetic looks as well as meet the stringent vehicle regulations. In the vehicle styling, bumper plays an important role in deciding of the contemporary looks of the vehicle. To improve customer satisfaction, it is important to design a bumper which provides feeling and sense of durability. In addition, bumper should sustain low-speed impact and protects the peripheral components such as parking lights, headlamps, hood, back door and safety related installed equipments like Rear parking camera, parking sensors, etc. Bumper should be dent resistant and be able to regain its original shape on removal of the applied load. An elegant design of bumper should be light weight with high strength. This paper explains about a new CAE methodology developed to simulate the real life loading condition of bumper and to calculate the deformation in the bumper.

In the modern automobile scenario in developing countries, customers are getting more meticulous and market more competitive. Now even the budget vehicle customer expects desirable vehicle performance in specific use cases of the vehicle that were previously not focused by designers. Hence, the focus on perceived quality challenges automobile engineers to go the extra mile when it comes to the cost-effective design of parts that are tangible to the customer. A vehicle's cowl cover is one such exterior component. The primary functions of this part are to provide air intake opening for the HVAC system and cover the components like wiper motor. The aesthetic function is to cover the gaps between windshield, hood, and fender as seamlessly as possible. A specific role of cowl cover, which calls for a designer's attention, is its load-bearing capability.

Automotive OEMs quest for vehicle body light weighting, increase in Fuel efficiency along with significant cut in the emissions pose significant challenges. Apart from the effect on vehicle handling, the reduction of vehicle weight also results in additional general requirements for acoustic measures as it is an important aspect that contributes to the comfort and the sound quality image of the vehicle, thus posing a unique challenge to body designers and NVH experts. Due to these conflicting objectives, accurate identification along with knowledge of the transfer paths of vibrations and noise in the vehicle is needed to facilitate measures for booming noise dampening and vehicle structure vibration amplitude. This paper focuses on the application of a unique design and development of vehicle body structure anti-vibration dynamic damper (DD), unique in its aspect in controlling booming noise generated at a specific RPM range.

Hydromount plays an important role in isolating vibration during idling. To meet ideal NVH criteria, a properly tuned Hydromount is required otherwise there will be abnormal noise due to cavitation effect. Cavitation noise is such a noise which is very difficult to identify in initial vehicle development stage. The effects of cavitation in the Hydromount become increasingly important for noise and performance goals. Cavitation is the formation and collapse of vapor bubbles in a working fluid when local static pressure falls below the vapor pressure of the working fluid. Technique to detect cavitation in Hydromount is presented in this paper. The countermeasure technique concentrates on increasing the fluid flow rate betweens fluid chambers. The results for different design countermeasure performance have been measured and the performance is compared in the vehicle. The results of vehicle level tests show the same trends as bench test results.

In a highly competitive market, one of the major challenges for an automobile designer is to lower the product cost while improving the performance. Therefore, from the vehicle comfort point of view, achieving a good ride, handling and NVH performance, while satisfying the low cost and low weight target needs attention from the concept stage of the development cycle. To achieve this balance, it is important to optimize the static and dynamic stiffness of the vehicle body. This paper focuses on the effect of vehicle body stiffness on the ride, handling and NVH parameters. It also addresses the relation between static and dynamic stiffness of the vehicle. The correlation of the stiffness values with the ride, handling and NVH performance is also studied through various experiments on the actual vehicle

With the advancement of regulatory norms in automobile industry, there is a challenge to meet performance efficiency targets, especially with a lightweight platform, while providing superior driving experience to customers. The shift towards weight optimization, makes the vehicle structure more susceptible to transfer a diverse range of noise and vibrations through body. Although most undesirable noises perceived inside the cabin can be reduced by superior technology engine mounts and NVH packaging, all such solutions lead to cost addition. Intelligent considerations in part design can be used to supplement predictable transfer paths to quell the unwanted vibrations. One such case is of the gear whine noise in certain rpm bands caused by inherent gear meshing frequency coinciding with natural frequency of an engine mounting bracket.

The Indian passenger vehicle market has grown by more than 40% by volume in the last decade and has reached a record high in FY23. This has created a more diverse and demanding customer base that values interior design and quality. The modern customer expects a high level of aesthetics and sophistication in their vehicle interiors - including in the luggage area. The Luggage Cover (Parcel Tray) is a component in the luggage area of a passenger vehicle that is used to conceal the luggage & improve its aesthetics. The cover is generally made of thermoplastic material with rotating hinges and is held in its place by the compression from the back door, which is frequently opened and closed. The parts that connect the cover to the door (usually an elastomer interface on the thermoplastic tray) tend to change over a period due to climatic conditions and leads to rattling concerns over a period.

Recently, the Flexible Pedestrian Legform Impactor (or Flex-PLI) - an advancement over the existing EEVC legform - was included in the Global Technical Regulation for Pedestrian Safety viz. GTR-9. The legform tool undergoes impact testing with vehicle at 40kmph in order to evaluate the frontal structure of vehicle for Pedestrian Safety. Being more biofidelic design over the old EEVC legform, Flex-PLI is more flexible and sensitive towards different vehicle designs, shapes and inner bumper structure. This flexibility and sensitiveness of its design also calls for examining the Manufactured FlexPLI for its efficacy under impact testing in terms of its Durability, Repeatability and Reproducibility. This study aims at validating the performance of the test device by building a platform for computing the variations in test results. In this study, three key aspects are identified to measure the performance of this device - Durability, Repeatability, and Reproducibility.

Computational Fluid Dynamics (CFD) is used extensively in the optimization of modern passenger car to meet the ever growing need of higher fuel economy, better engine and underbody cooling. One of the way to achieve better fuel economy is to reduce the vehicle overall resistance to flow, know as drag. Vehicle drag is a complex phenomenon governed by vehicle styling, component shape, layout and driving velocity and road conditions. To reduce the drag a lot of aero-parts are used these days such as air-dam, skirts, spoiler, undercover, dams etc. However the design of these aero-parts must be optimized to get the desired result as their addition alone does not guarantee improvement in performance. This paper aims at studying the effect of air-dam height and position on vehicle aerodynamics. Also the effect of air-dam addition was verified using fuel economy simulations.

As automobile design has become more sophisticated, the level of noise inside the vehicle has been dramatically reduced. The sources of noise which were previously ignored have now become relatively more significant, and it has become desirable to reduce the noise from such sources. The noise from the fuel system may be low but the fact that it operates continuously whether or not vehicle is moving, makes its noise level more noticeable. So in order to achieve overall better NVH characteristics in a car it is important to minimize the noises from fuel delivery system. The current paper addresses the fuel pulsation noise from fuel delivery line and describes countermeasure approach for noise reduction using an Experiment Based Design approach (EBD).

Today automotive sector has become very dynamic. There is renewed emphasis on safety through adoption of new regulations, electric vehicles are on the verge of replacing ever evolving engine technology, emission norms are getting stringent year by year & several companies are trying to make vehicles more efficient by adoption of new light weight or high strength materials and altering manufacturing methods. In one of the new vehicle programs, there was focus on vehicle styling. In order to improve the styling, back door spoiler was to be considered from design stage itself. Back door spoiler is added in high speed vehicles for creating a downward force to improve the vehicle hold on road. However, nowadays in passenger vehicles that purpose has been subsided and spoiler is given in automotive vehicles for aesthetics or giving vehicle a sporty appearance. For instance in our case it was given to augment aesthetics. This would have resulted in additional cost and weight.

Exhaust system of an automobile is primarily employed in automobile to purify exhaust gases and reduce noise due to combustion. However, a side-effect of the above function is the increase in backpressure. As specified in various literatures, an increase in backpressure can lead to a deterioration on engine performance (Power & torque). Benefit of backpressure reduction can be further taken in terms improving the power & torque of engine or improving the fuel economy. With growing concerns related to global warming and CO2 emissions, reducing exhaust back pressure is one of the promising areas in engine design in order to improve the fuel economy of the automobile and achieving carbon neutrality targets. However, reducing the back pressure generally tends to deteriorate the noise attenuation performance of the Exhaust system.

MSIL (Maruti Suzuki India Limited), India’s leading carmaker, has various SUVs (Sports Utility Vehicle) in its model lineup. Traditionally, SUVs are considered to have a bold on-road presence and this bold design language often deteriorates aerodynamic drag performance. Over the years, the demand for this segment has significantly grown, whereas the CAFE (Corporate Average Fuel Economy) norms have become more stringent. To cater this growing market demand, MSIL planned for two new SUVs: (1) New BREZZA - A bolder design with similar targeted aerodynamic performance compared to its predecessor (BREZZA-2016) and (2) FRONX - A new cross-over SUV vehicle targeted best-in-class aerodynamic performance in this category at MSIL. This paper illustrates the aerodynamic development process for these two SUVs using CFD (Computational Fluid Dynamics) and full scale WTT (Wind Tunnel Test).

The automobile market is witnessing a different trend altogether - the trend of shifting preference from powerful to fuel efficient machines. Certain factors like growing prices of fuel, struggling global economy, environmental sensitiveness and affordability have pushed the focus on smaller, efficient and cleaner automobiles. To meet such requirements, the automobile manufacturers, are going stringent on vehicle weights. Using electric and hybrid power-plants are other options to meet higher fuel efficiency and emission requirements but significant cost of these technologies have kept their growth restricted to only few makers and to only few regions of the globe. Optimizing the vehicle weight is a more attractive option for makers as it promises lesser time to market, is low on investment and allows use of existing platforms.

Engine noise is a major source of noise inside the vehicle compartment. Recently, the quietness of the occupant cabin has become an important dimension to the quality of product. OEMs are finding it challenging to meet the customer expectations for “Powerful yet quiet” attribute. Several focused studies have been made to reduce the under hood component noise in automobiles. This paper summarizes the optimization of the vibro-acoustic sensitivity (VAS) of the engine mounts of a small car engine. The contribution of each engine mount on the structure-borne noise transfer inside the cabin is the prime focus of this study. In the current analysis, the body side and engine side mounting bracket stiffness analyses are carried out to reduce the vibro-acoustic transfer. Experimental methods like conventional FRF, on-road data acquisition and physical prototyping have been used.

The outside visibility through the windshield and ORVM visibility through the side glasses are critical for safe driving. The frost deposition on the Windshield and side glasses in the cold climatic condition impairs the outside and ORVM visibility during driving and hence leads to an unsafe driving condition. In India, the regulation AIS-084 governs the defrosting standard. The defrosting performance evaluation by testing cannot be performed at concept stage when the vehicle prototype is not available. It also increases the cost of vehicle development due to increase in the number of prototype used for testing. This paper explains about the in-house developed CFD methodology to evaluate the windshield defrosting performance of the vehicle in the concept stage when no vehicle proto is available and cost of countermeasure for defrosting performance improvent is very less. This methodology is implemented for some of the existing models.