Search Results

This paper presents a new method of reliability testing for C-MOS VLSI's evaluation, i.e. a means to verify the future reliability prediction. In this method, VLSI's under testing are stressed by soft x-ray irradiation and subsequently annealed at moderate temperature and then they are classified according to the time required to recover the computer action of VLSI's to the previous level. This method offers a new technology for future reliability testing in higher accuracy of C-MOS VLSI's used in automotive electronics system compared to the conventional technique so called burn-in.

This paper deals with the current status and the future prospects in automotive electronics in Japan. Electronics systems have been individually developed for the engine, transmission, brakes, suspension, instrument panel and other areas. The next challenge will be to link these standalone systems together with interactive control blocks: for example, powertrain, vehicle control and body control. These blocks, in turn, will be coupled together by data communications links, and they will be linked through communications to data sources existing outside the automobile. Control technology will change from PID control to modern control theory and this will impact on microprocessor architecture. These control systems will increase the controllability, reliability and serviceability of the automobile as a whole.

In these years, requirements for application of electronic control to trucks, buses and agricultural vehicles are becoming stronger. This paper discusses current status of electronic products applicable to them in each of the following three control categories - Powertrain control, Vehicle control, and Body control. At present, production amount of these products is not large but production of them is expected to increase to more than dozen of current production within several years.

We have developed a highly corrosion-resistant serpentine type condenser which is characterized by its manufacturing process that zinc is coated on the surface of a multi-cavity extruded tubing at the rate of 5-20 g/m2 by arc spray, and then, thus prepared tubing and corrugated fin stocks are brazed by the conventional Nocolok brazing process (Herein after this is referred to as ZAS NB process). By this brazing process as well as conventional flux brazing (FB) process, a highly pitting corrosion-resistant zinc diffusion layer is formed on the surface of the tubing at the time when brazing is operating. This newly developed method achieved improvements in productivity and quality of product.

Researches and developments of electronic transmission control have been made along with the progresses of electronical technologies in order to meet the requirements of decreasing fuel consumption as well as improving drivability. And nowadays many kinds of electronically controlled transmissions have been applied to a variety of cars. In this paper, a history of electronic transmission control from the first control systems mounted on TOYOTA CORONA in 1970s for the first time in the world to the newest ones having a lock-up function for fluid coupling (Torque Converter) as well as progresses of the respective electronical transmissions to their practical uses will be explained.

EMI suppresion capacitors and filters are common in automobile electronics today, but they are insufficient for heavy concentrations of wideband electromagnetic radiation. To resolve this problem, a highly-integrated Ceramic Absorber was developed to efficiently shield against frequencies from 1MHz to 1000MHz, which is mountable on the control circuit board easily, as it is the form of a flat plate strip line. This filter provides the signal line with an electromagnetic absorption effect through line transmission characteristics. Research into ceramic materials was required to determine the specific dielectric constants and frequency characteristics of ferroelectric ceramic materials. The development objective was material with optimum dielectric dispersion, as determined from research into energy absorption based on the Debye dielectric dispersion theory.

The conventional relay manufacturing line required several workers for manual assembly and adjustment operations. This problem was compounded by the fact that high precision quality of the product could not be easily achieved. To solve these problems, Nippondenso has made a breakthrough in developing new technologies which were incorporated in an automated relay manufacturing line, enabling an individual process cycle time of 0.9 seconds throughout all manufacturing processes. This includes component parts fabrication, assembly, inspection, adjustment and packaging, and does not require the direct intervention of any operators. Various models of relays can be run at the same time in this line because the set up time for different models is almost zero. This greatly improves production control.

In the diesel field, innovative technology development has been desired for fuel injection system from the points of severe emission reduction to meet increasingly stringent emission regulation year by year respecting environmental protection and product improvement for various customer requirements including fuel consumption improvement. We have been pursuing the ideal fuel injection system which is called “ECD-U2” to meet above expectations. “ECD-U2” is the injection system of highly pressurized fuel with optimum injection timing by using of the injector controlled by high speed response magnetic valve. This system also has the fuel injection pattern controllability in one injection ( injection rate ) as one of the greatest asset. This report focuses on the new injector structure development to achieve desirable injection rate shaping for diesel engine combustion.

This paper introduces a new type of radiator that has been developed with the objective being, high performance (compact size), light weight, and high quality in the field of copper/brass radiators that are superior in heat conduction, lower in price, yet there is still more room for improvement. The development of a new copper/brass radiator with the objective being higher performance (more compact), lighter weight, and higher quality has been completed. The synthetic study covered is not only an in-depth analysis of performance and structure, but the new development of materials and production engineering. As a result, the new radiator has a minimum of 10% increased performance, a minimum of 25% weight reduction, and its corrosion resistance is more than twice that of a conventional radiator.

In recent years, designers have attributed increasing importance to reducing noise in car interiors, and various improvements have led to a steady decrease each year in said interior noise. More recently, there has been abundant research on quantitative and qualitative approaches to interior noise, including studies on improving sound quality, such as elimination of rumbling noise and creating a feeling of linearity. Particularly engine noise, one of the major causes of interior noise, has been studied from various angles and significantly reduced in recent years. This has led in turn to increased interest in air induction noise which was a relatively minor noise source in the past. One method of reducing induction noise is the addition of several resonators to the induction system. Induction system components, including resonators, have a major effect on engine output and fuel consumption.