Search Results

The authors developed a low-speed in-vehicle network for the body control system on passenger cars, where the most remarkable effects to reduce the number of wire harnesses could be expected. First, the authors analyzed the body control system to clarify the specifications required to build a low-speed in-vehicle network. Then the authors worked out optimum communication protocol, placing emphasis on cost reduction which is the key to expanding the applications of the low-speed in-vehicle network over wider fields. The low-speed in-vehicle network was evaluated for its performance through simulation and on-vehicle tests, and proved the practical validity of the concept. It was also verified that introducing the low-speed in-vehicle network has a satisfactory effect to reduce the number of wire harnesses.

1 Attenuation of acoustic noise from automobile components is important for passenger comfort. Since the alternator is one of the major sources of noise, many manufacturers have studied the various mechanisms which generate noise within an alternator as well as the methods to reduce the noise level. This paper presents the dynamic properties of the alternator with respect to the acoustic noise during current generation, and introduces a vibration damping structure based on experimental modal analysis. Rotating magnetic forces in a magnetic circuit (stator and rotor) can excite numerous structural resonances, resulting in acoustic noise. A modal analysis performed on the major magnetic circuit of the alternator (Nippondenso Co., Ltd.) revealed that the stator has elliptic, triangular and rectangular mode shapes in the radial coordinate plane, while the rotor does not have any significant resonances in the same 0 - 3 kHz region.

Environmental control of the passenger compartment has become increasingly important and sophisticated. One major consideration of interior comfort is clean, healthful, aromatic air. Accordingly, two new products were developed to increase the dust removing and deodorizing effects. These are the “Air Purifier” and the air conditioner ventilation filter called the “Air Refiner”. The Air Purifier affects the air inside the vehicle, and the Air Refiner affects the air from outside the vehicle. Remarkable effects are achieved by employing a newly developed material called “Impregnated Activated Carbon Fiber (IACF)” which is utilized in both the Air Purifier and the Air Refiner. In addition to the air purification system, a new fragrance control system called the “Aroma Controller” was developed. The Aroma Controller allows the user to select from three aromatic fragrances. The fragrance is emitted intermittently by way of “1/f fluctuation control” via microcomputer control.

This paper deals with the current status and the future prospects in automotive electronics in Japan. Electronics systems have been individually developed for the engine, transmission, brakes, suspension, instrument panel and other areas. The next challenge will be to link these standalone systems together with interactive control blocks: for example, powertrain, vehicle control and body control. These blocks, in turn, will be coupled together by data communications links, and they will be linked through communications to data sources existing outside the automobile. Control technology will change from PID control to modern control theory and this will impact on microprocessor architecture. These control systems will increase the controllability, reliability and serviceability of the automobile as a whole.

Instrument clusters used in automobiles play an important role as man-machine interface. A variety of information about the current driving situation is conveyed to the driver quickly and accurately. A great interest has been taken in the high visibility and legibility of the head-up display (subsequently abbreviated as HUD). Originally developed as display used in aeronautical applications, we have tried to exploit ways to adapt this device for automotive use. We have succeeded to produce a new HUD system, which has the following design features; (1) High brightness and high contrast display device using a liquid crystal display (subsequently abbreviated as LCD) and a halogen lamp illumination. (2) Long focus display in two colors using holographic lens. (3) Automatic dimming control system using an illuminance sensor. (see Fig. 1)

Recently, an increasing demand for comfort has been accelerating the trend toward multifunctional car air conditioners, including zone air conditioning which controls the cabin temperature independently for the driver and the passenger and compensates for the side solar radiation. In addition, the multifunctional air conditioner should be compact to save cabin space and ensure passenger comfort. This report describes the development of a compact and multifunctional car air conditioning unit.

Researches and developments of electronic transmission control have been made along with the progresses of electronical technologies in order to meet the requirements of decreasing fuel consumption as well as improving drivability. And nowadays many kinds of electronically controlled transmissions have been applied to a variety of cars. In this paper, a history of electronic transmission control from the first control systems mounted on TOYOTA CORONA in 1970s for the first time in the world to the newest ones having a lock-up function for fluid coupling (Torque Converter) as well as progresses of the respective electronical transmissions to their practical uses will be explained.

EMI suppresion capacitors and filters are common in automobile electronics today, but they are insufficient for heavy concentrations of wideband electromagnetic radiation. To resolve this problem, a highly-integrated Ceramic Absorber was developed to efficiently shield against frequencies from 1MHz to 1000MHz, which is mountable on the control circuit board easily, as it is the form of a flat plate strip line. This filter provides the signal line with an electromagnetic absorption effect through line transmission characteristics. Research into ceramic materials was required to determine the specific dielectric constants and frequency characteristics of ferroelectric ceramic materials. The development objective was material with optimum dielectric dispersion, as determined from research into energy absorption based on the Debye dielectric dispersion theory.

Semi-active suspension is one of many effective devices to improve vehicle stability, controllability and riding comfort. A practical means to realize semi-active suspension is to vary the damping force of the shock absorber. In this paper, we propose a new type of shock absorber using a piezoelectric sensor and actuator. The piezoelectric sensor and actuator are built into the piston rod which is a part of the shock absorber. The piezoelectric element provides a fast response and a high actuation force. We used the piezoelectric element in shock absorbers in order to take advantage of these two features. High level compatibility between stability, controllability and riding comfort is expected, since damping force changes very quickly using this new type of shock absorber. In this paper, several topics are discussed. First, a general description of the damping force control system with simple configuration is explained.

During motor vehicle operation, the image processing and pattern recognition of various external visual information to assist human vision is an effective method to improve safety and driving comfort. Research into image processing and pattern recognition, supported by advancing device and computer technology, is entering the age of practical application. Against this background, we have developed a system to visually detect, recognize and transmit to the vehicle operator road signs, which are definable patterns, as the first step in the application of image processing and pattern recognition technology to the automotive sector. The major points of this system are as follow: 1. A color processing system was adopted which reduces the effects of brightness and shadow, and implemented in dedicated hardware. 2. The development of dedicated hardware for template matching enables the real-time extraction and processing of defined patterns within the image.