Search Results

Under the constraints of improved vehicle refinement, automotive OEMs are challenged to improve vehicle noise, vibration and harshness (NVH) characteristics, reduce vehicle weight, and streamline manufacturing and assembly processes. In support of these objectives, alternate methods of vehicle noise control are being investigated. This paper will address one area where alternate material strategies are being investigated to meet these requirements. Floorpan damping treatments are a primary component of the overall vehicle noise package. This paper will investigate three floorpan damping treatments. Comparisons will be made between asphaltic melt sheets, constrained layer dampers, and spray-on dampers. Performance of these treatments will be measured using laboratory methods and will feature a case study using a Body-In-White (BIW) to demonstrate performance of the different materials.

Once the design of a door sheetmetal and accessories is confirmed, the acoustics of the door system depends on the sound package assembly. This essentially consists of a watershield which acts as a barrier and a porous material which acts as an absorber. The acoustical performance of the watershield and the reverberant sound build-up in the door cavity control the performance. This paper discusses the findings of a design study that was developed based on design of experiments (DOE) concepts to determine which parameters of the door sound package assembly are important to the door acoustics. The study was based on conducting a minimum number of tests on a five factor - two level design that covered over 16 different design configurations. In addition, other measurements were made that aided in developing a SEA model which is also compared with the findings of the results of the design study.

Recently, many authors have attempted to represent an automobile body in terms of experimentally derived frequency response functions (FRFs), and to couple the FRFs with a FEA model of chassis for performing a total system dynamic analysis. This method is called Hybrid FEA-Experimental FRF method, or briefly HYFEX. However, in cases where the chassis model does not include the bushing models, one can not directly connect the FRFs of the auto body to the chassis model for performing a total system dynamic analysis. In other cases when the chassis model includes the bushings, the bushing dynamic rates are modeled as constant stiffness rather than frequency dependent stiffness, the direct use of the HYFEX method will yield unsatisfactory results. This paper describes how the FRF's of the auto body and the frequency dependent stiffness data of the bushings can be combined with an appropriate mathematical formulation to better represent the dynamic characteristics of a full vehicle.

The Frequency Response Function (FRF) is a fundamental component to identifying the dynamic characteristics of a system. FRF's have a significant impact on modal analysis and root cause analysis of NVH issues. In most cases the FRF can be easily measured, but there are instances when the measurement is unobtainable due to spatial constraints. This paper outlines a simple experimental method for obtaining a high quality input-output FRF of a structure in areas where an impact hammer can not reach during impact testing. Traditionally, the FRF in such an area is obtained by using a load cell extender with a hammer impact excitation. A common problem with this device is a double hit, that yields unacceptable results.

The popularity of AWD passenger vehicles presents a challenge to provide car-like drive-train NVH within a relatively small package space. This paper describes a drive-train NVH case study in which analysis and test were used, in conjunction, to solve an NVH problem. Also, it details a systematic process of using the analytical model to identify and resolve similar problems. The particular problem for this case study is a noise and vibration issue occurring at 75 MPH primarily in the middle seat of an all-wheel drive vehicle. Tests indicated that it may be due to propeller shaft imbalance. Analysis results showed good correlation with the tests for that loading condition. Several solutions were identified, which were confirmed by both test and analysis. The most cost-effective of these solutions was implemented.

This paper describes a diesel vehicle NVH development process which has been applied to achieve a number of best in class products in the European diesel marketplace. It focuses upon: Key diesel vehicle NVH issues Critical success factors in the NVH development process NVH methodologies, tools and techniques which support this process Case studies using results taken largely from a luxury sedan vehicle development program are used to highlight the issues and to demonstrate the success of this process in achieving a vehicle with high diesel appeal. The paper concludes with an insight of how this process is being adapted and refocused to reflect the anticipated requirements of the potential US diesel vehicle marketplace.

Maintaining or improving acoustic and vibration quality of vehicles, the automotive industry continually faces design goals to reduce weight and manufacturing cost. In light of these objectives, advanced material design techniques facilitate the development of a high performance bulk applied constrained layer vibration damper aimed at improved automotive acoustics. The overall vehicle acoustic and vibration quality relies heavily on floor pan vibration dampers. A review of current industry damping technologies is addressed. Industry migration to bulk applied extensional dampers from the once ubiquitous asphalt sheet damper is discussed. Furthermore, this paper addresses the development of a new bulk applied constrained layer damper technology that delivers superior acoustical performance. The paper presents the chemistry formulation, the prediction of analytical results, and experimental validation.

Cavity reinforcement materials are used in the automotive industry to stiffen hollow cavities in vehicle body constructions. Typical areas of use include the engine rails, rocker panels, roof support or any other cavity in need of structural reinforcement. Use of these materials can allow for significant reductions in vehicle weight and increase structural stiffness with minimal impact to production tooling. Additional benefits can be gained by using the material as a physical barrier to the propagation of noise, water and dust. The objective of this paper is to describe a case study which implemented a new type of cavity reinforcing material to improve low frequency vehicle noise and vibration characteristics.

Chemically and heat reactive, expandable sealants are used as “acoustical baffles” in the automotive industry. These acoustic baffles are used to impede noise, water and dust propagation inside of structural components and body cavities. Use of these sealant materials has grown significantly as the demands to improve vehicle acoustic performance has increased. Various test methods have been developed to quantify the performance of these materials through direct comparison of material samples. These investigations use standardized testing procedures to characterize the acoustic performance of a material sample on the basis of controlled laboratory test conditions. This paper presents a step in the progression of evaluating acoustic baffle performance in the vehicle. Standard experimental techniques are used to investigate the influence of the baffles on the vehicle acoustic performance.

One of the major NVH concerns for automobile manufacturers is the response of a vehicle to the impact of the tire as it encounters a road discontinuity or bump. This paper describes methods for analyzing the impact response of a vehicle to such events. The test vehicle is driven on a dynamometer, on which a bump simulating cleat is mounted. The time histories of the cleat impact response of the vehicle can be classified as a transient and a repeated signal, which should be processed in a special way. This paper describes the related signal processing issues, which include converting the time data into a continous spectrum, determination of the correct scaling factor for the analyzed spectrum, and smoothing out harmonics and fluctuations in the signal. This procedure yields a smooth frequency spectrum with a correctly scaled amplitude, in which the frequency contents can be easily identified.

A variety of expandable sealants are used to fill vehicle body cavities to impede noise, water, air, and dust from entering (and exiting) the passenger compartment. This paper compares three sealant technologies used for filling body cavities. The technologies are rubber-based elastomeric preformed parts; thermoplastic elastomeric preformed parts, and two-component polyurethane that is foamed-in-place directly in the vehicle body cavity. The following comparisons are made between the three technologies: application methods and issues, cost, material properties and acoustical performance.

This paper dis cusses the development of a nonlinear shock absorber model for low-frequency CAE-NVH applications of body-on-frame vehicles. In CAE simulations, the shock absorber is represented by a linear damper model and is found to be inadequate in capturing the dynamics of shock absorbers. In particular, this model neither captures nonlinear behavior of shock absorbers nor distinguishes between compression and rebound motions of the suspension. Such an inadequacy limits the utility of CAE simulations in understanding the influence of shock absorbers on shake performance of body-on-frame vehicles in the low frequency range where shock absorbers play a significant role. Given this background, it becomes imperative to develop a shock absorber model that is not only sophisticated to describe shock absorber dynamics adequately but also simple enough to implement in full-vehicle simulations. This investigation addresses just that.

A 50 Hz Solid-State Relay (SSR) was used to provide pulse-width-modulated power to engine cooling fans for continuous speed control, to reduce airflow noise and improve efficiency. However, this caused the cooling fans to vibrate at the switching frequency and harmonics, thus degrading vehicle NVH performance. This paper describes the problem associated with SSR- powered cooling fans, including root-cause analysis, and identification of areas sensitive to vibration affected by the switching power supply. Based on our analysis, we found several solutions to the problem. Our production solution and some generic recommendations for shroud design are presented in the paper.

The damping loss factor of a structural panel plays a significant role in its vibro-acoustic performance. The objective of this paper is to present a new procedure for evaluating the damping loss factors of these panels. Traditionally, the damping loss factors are determined by using the decay rate of the decay curves which are experimentally obtained from the structure. However, this is time consuming and the accuracy is limited by fluctuations in the decay curve. In this paper, the envelope signal of each decay curve is determined through its Hilbert transform, and the remaining small fluctuations in the envelope signal are further smoothed out by the exponential average method. Finally, the damping loss factor is estimated based on the smoothed envelope signal of each decay curve. A computer program has been developed to implement this procedure. It is shown that this procedure improves both accuracy and efficiency of the decay rate method for estimating damping loss factor.

Improving vehicle crash, NVH and metal fatigue performance using expanding polymeric foams can be achieved with a systematic approach. By employing a systematic approach with expandable epoxy foams and alternative carriers, the product development process can be significantly reduced. As a result, high strength and lightweight solutions can be designed to improve the structural performance of today's vehicles. This technical paper will examine the key steps in utilizing a systematic approach to selecting, designing and modeling structural expandable epoxy foam solutions used in conjunction with metallic and non-metallic carriers. A review of material properties, alternative designs and finite element modeling methods will allow for a thorough understanding of how expandable epoxy foams can meet the demanding challenges for improved occupant safety, reduced interior noise levels and increased durability at a reduced vehicle weight.

A new semi-active damping approach for the reduction of transmitted acoustic noise is investigated. It involves the controlled variation of the system's spring constant in response to the system's motion in such a way as to maximize the energy lost in the damping elements. A Discrete Mechanics simulation of a prototypical spring-mass-damper system is used to compare the performance of this approach with the semi-active viscous damping approach being applied to this problem today. It is found that: (1) Parametric damping does not require precise phase matching between the noise signal and the response of the system. (2) “Runaway” catastrophes associated with the nonlinear response of the spring constant are avoided by saturating the response of the spring. (3) An algorithm that controls the response of the element by recognizing when it is storing undesired energy suffices to attenuate harmonic and transient noise below 1:1 transmissibility for all frequencies at and below resonance.

Low frequency torsional vibrations can be a significant source of objectionable vehicle vibrations and in-vehicle boom, especially with changes in engine operation required for improved fuel economy. These changes include lower torque converter lock-up speeds and cylinder deactivation. This paper has two objectives: 1) Examine the effect of increased torsional vibrations on vehicle NVH performance and ways to improve this performance early in the program using test and simulation techniques. The important design parameters affecting vehicle NVH performance will be identified, and the trade-offs required to produce an optimized design will be examined. Also, the relationship between torsional vibrations and mount excursions, will be examined. 2) Investigate the ability of simulation techniques to predict and improve torsional vibration NVH performance. Evaluate the accuracy of the analytical models by comparison to test results.

In the development of several outside mirror designs for vehicles, a high frequency noise (whistling) phenomenon was experienced. First impression was that this might be due to another source on the vehicle (such as water management channels) or a cavity noise; however, upon further investigation the source was found to be the mirror housing. This “laminar whistle” is related to the separation of a laminar boundary layer near the trailing edges of the mirror housing. When there is a free stream impingement on the mirror housing, the boundary layer starts out as laminar, but as the boundary layer travels from the impingement point, distance, speed, and roughness combine to trigger the transition turbulent. However, when the transition is not complete, pressure fluctuations can cause rapidly changing flow patterns that sound like a whistle to the observer. Because the laminar boundary layer has very little energy, it does not allow the flow to stay attached on curved surfaces.

Laminated steel sheets sandwiched with a polymer core are increasingly used for automotive applications due to their vibration and sound damping properties. However, it has become a major challenge in finite element modeling of laminated steel structures and forming processes due to the extremely large differences in mechanical properties and in the gauges of the polymer core and the steel skins. In this study, circular cup deep drawing and V-bending experiments using laminated steels were conducted in order to develop a modeling technique for laminate forming processes. The effectiveness of several finite element modeling techniques was investigated using the commercial FEM code LS-Dyna. Furthermore, two production parts were selected to verify the modeling techniques in real world applications.

Acoustics of automotive intake and exhaust systems have been modelled very successfully for many years using 1D gas dynamic simulations. These use pseudo 3D models to allow complex components to be constructed from simple building blocks. In recent years, tools have appeared that automate the construction of network models from 3D geometries of intake and exhaust components. Using these tools, concurrent noise and performance predictions are a core part of most engine development programmes. However, there is still much interest in the more traditional field of linear acoustics: analysing the acoustic behaviour of isolated components or predicting radiated noise using a linear source. Existing approaches break the intake and exhaust system down into a set of components, each with known acoustic properties. They are then connected together to create a network that replicates the donor non-linear model.