Search Results

Relative advantages and disadvantages of blow molding vs. injection molding as they pertain to the production of automotive instrument panels are compared. Specific design issues such as parts consolidation and surface appearance are discussed, along with such processing issues as cycle time, tooling costs and regrind generation. In addition, an economic model is presented which examines the sensitivity of part cost to such variables as capital required, tooling cost, cycle time, finishing costs, regrind generated, and yearly volume of parts produced. The result is both a qualitative as well as quantitative tool to aid the designer and manufacturing engineer in making a rational process selection.

Continued development of Reinforced Reaction Injection Molding (RRIM) polyurea polymers for toughness, blister resistance and large-part processing as exterior vertical body panels has launched ELPO-compatible exterior outers into automotive assembly-line operations. This allows automotive OEM design to take advantage of the unique molding shapes for side outers and fenders while reducing weight, assembly (DFA) and time/operations costs (DFM). Polyurea RRIM body panels have been successful in meeting the demanding auto industry requirement for lightweight, damage-resistant exterior outer panels as an economical alternative to steel. Design freedom advantages, low prototype cost and tooling savings through predictive modelling have allowed the commercial use of RRIM body panels. This high-temperature-resistant polyurea RRIM composite allows on-line painting, including passing through the steel corrosion protection primer (E-coat) cure environments.

Standard salt spray corrosion tests have been used with controlled purity AM60 castings to define the critical iron, nickel, and copper contaminant levels below which excellent corrosion performance can be obtained. As previously observed with the AZ91 alloy, the iron solubility and the corrosion tolerance limit for iron are dependent upon the manganese content of the metal. The zinc free AM60 alloy has a somewhat lower tolerance for all three of the critical contaminants when compared to AZ91, but when the three contaminants are below their individual tolerance limits, the salt spray performance is again equal to or better than die cast 380 aluminum and cold rolled steel.

Increased requirements for crash energy management in automotive interiors have led to increased application of magnesium alloy AM50A. Successful integration of this new alloy with hot chamber diecasting process technology requires substantial adjustment and attention to processes and practices. This paper details the conversion of magnesium AZ91D steering column diecastings to high ductility structural alloy. Description is given of the changes made to foundry practices, casting parameters, process compliance monitoring, and hot end component management. The resulting improvements allow production of components comparable to the traditional alloy in manufacturing process demands while offering improved ductility and impact strength.

A highly reflective polymeric sheet has been invented which has a metallic appearance but contains no metal. The material can appear chrome-like, or be designed to transmit and reflect light for novel lens applications. The absence of metal waste streams and volatile organic emissions gives this technology significant environmental advantages over competitive methods of bright work or reflector fabrication. This unique optical material is non-corroding, and has the low thermal and electrical conductance of plastic. It is produced by coextruding a large number of alternating layers of polymers having a refractive index difference. This technology offers new degrees of freedom for light control in many applications including lighting reflectors, lenses, display panels, decorative trims, and energy management.

The magnesium alloy AE42 (nominally a 4 % aluminum, 2 % rare earth alloy of magnesium) is a developmental die cast alloy with good strength and creep resistance at elevated temperatures. Standard salt spray corrosion tests have been used with controlled purity AE42 die castings to define the critical iron, nickel and copper contaminant levels below which excellent corrosion performance can be obtained. As previously observed with the magnesium alloys AZ91, AM60, and AS41, the critical iron content is dependent upon the manganese content of the alloy. While the iron:manganese tolerance for AE42 is about the same as that of AM60, the tolerance for the nickel and copper contaminants is greater than that of AZ91. When each of these contaminants is less than the critical level, the salt spray performance was equal to or better than die cast 380 aluminum and cold rolled steel.

The effect of non-metallic inclusions (NMIs) on the properties of die cast magnesium was investigated. NMI content was quantified by a newly developed light reflectance technique. The mechanical properties of optimized AM60B test bars were found to decrease at high inclusion levels. Low inclusion levels did not statistically reduce the mechanical properties of AM60B as compared to virgin metal. Argon-refined AM60B displayed mechanical properties that were indistinguishable from virgin alloy. AZ91D test plates were die cast at various cleanliness levels. After salt spray testing, it was found that the surface quality of the castings was slightly degraded at high NMI levels. The general corrosion performance was also affected, but paint adhesion was relatively unaffected. At high NMI levels, the corrosion performance was still better than 380 A. Machinability of the AZ91D test plates was quantified by measuring tool wear and cutting forces.