Search Results

In the next incoming future the necessity of reducing the raw emissions leads to the challenge of an increment of the thermal engine efficiency. In particular it is necessary to increase the engine efficiency not only at full load but also at partial load conditions. In the open literature very few technical papers are available on the partial load conditions analysis. In the present paper the analysis of the effect of the throttle valve rotational direction on the mixture formation is analyzed. The engine was a PFI 4-valves motorcycle engine. The throttle valve opening angle was 17.2°, which lays between the very partial load and the partial load condition. The CFD code adopted for the analysis was the FIRE AVL code v. 2013.2. The exhaust, intake and compression phases till TDC were simulated: inlet/outlet boundary conditions from 1D simulations were imposed.

In this paper an integrated experimental and numerical approach is applied to optimize a new 2.5l, four valve, turbocharged DI Diesel engine, developed by VM Motori. The study is focused on the EGR system. For this engine, the traditional dynamometer bench tests provided 3-D maps for brake specific fuel consumption and emissions as a function of engine speed and brake mean effective pressure. Particularly, a set of operating conditions has been considered which, according to the present European legislation, are fundamental for emissions. For these conditions, the influence of the amount of EGR has been experimentally evaluated. A computational model for the engine cycle simulation at full load has been built by using the WAVE code. The model has been set up against experiments, since an excellent agreement has been reached for all the relevant thermo-fluid-dynamic parameters. The simulation model has been used to gain a better insight on the EGR system operations.

In this work an experimental analysis is performed to evaluate the influence of different flow bench test conditions and system configurations on the flow characteristics in the intake system of a high performance 4-valve, SI Internal Combustion Engine: valve lift, test pressure drop, throttle valve aperture, throttle valve opening direction in respect to the intake system layout (i.e. clockwise/counterclockwise), presence of the tumble adaptor. To this aim, experimental tests are performed on a Ducati Corse racing engine cylinder head, by measuring the discharge coefficient and the tumble coefficient. The several experimental data obtained by combining the different operational and geometrical parameters are analysed and discussed.

In this paper a numerical analysis is carried out of the flow characteristics in the intake system of a high performance engine. To this aim, the experimental flow bench results - obtained in tests performed on a Ducati Corse 4 valves racing engine head and presented in the parallel work [1] - are compared with the numerical ones. In [1] an experimental analysis was performed to evaluate the influence, on the flow characteristics in the intake system of a high performance 4 stroke - 4 valve internal combustion engine Notwithstanding the macroscopic meaning of the measured global coefficients Cd (Discharge Coefficient) and Nt (Tumble Number), the comparative analysis of their respective trends allowed some hypotheses to be drawn on the flow development internally to intake system ducts. In order to confirm the conclusions drawn in [1] and to reach a deeper insight in the flow characteristics, numerical simulations were performed.

The present work is the continuation of the research activity developed by the same authors in last years about the use of recent technologies (Artificial Neural Networks) for the set up of “software redundancy” modules to be implemented On Board for the use in Diagnostic Systems. In the present work, a system based on Artificial Neural Networks models for automotive engines Fault Diagnosis and Isolation purposes is set-up and analysed. Four sensors/actuators (throttle valve, rotational speed, torque and intake manifold pressure) are considered, and the respective acquired data are used to train and test four ANN modules correlating the different quantities. An FDI scheme is presented which generates fault codes sequences by suitably treating the primary residuals, obtained by comparing experimental data with the calculated ones by the ANN modules. The robust fault isolation capabilities of the proposed FDI system are presented and discussed.

In PFI and GDI engines the tumble motion is the most important charge motion for enhancing the in-cylinder turbulence level at ignition time close to the spark plug position. In the open literature different studies were reported on the tumble motion, experimental and not. In the present paper the research activity on the tumble generation at partial load and very partial load conditions was presented. The added value of the analysis was the study of the effect of the throttle valve rotational direction on the tumble motion and the final level of turbulence at the ignition time close to the spark plug location. The focus was to determine if the throttle rotational direction was crucial for the tumble ratio and the turbulence level. The analyzed engine was a PFI 4-valves motorcycle engine. The engine geometry was formed by the intake duct and the cylinder. The CFD code was FIRE AVL code 2013.1.