Refine Your Search

Topic

Search Results

Standard

Fluoroscopic X-Ray Inspection

1945-08-01
HISTORICAL
AMS2650
This specification has been declared "NONCURRENT" by the Aerospace Materials Division, SAE, as of 1-1-84. It is recommended that this specification not be specified for new designs. This cover sheet should be attached to the initial issue of the sUbject specification. Noncurrent refers to those procedures which have previously been widely used and which may be required on some existing designs in the future. The Aerospace Materials Division does not recommend these as standard procedures for future use in new designs. Each of these "Noncurrent" specifications is available from SAE upon request. This specification has been CANCELLED by the Aerospace Materials Division, SAE, as of August, 1989. By this action, subject specification number and its title will be deleted from the active specification index of Aerospace Material Specifications.
Standard

Inspection, Ultrasonic Product Over 0.5 Inch (12.7 mm) Thick

1995-03-01
HISTORICAL
AMS2630B
This specification covers procedures for ultrasonic inspection, by pulse-echo procedures, of flat, rectangular, round, cylindrical, and contoured products having a thickness or cross-sectional dimension greater than 0.50 inch (12.7 mm), using either contact or immersion methods, and using the longitudinal-wave or shear-wave modes or combinations of the two, as necessary. This specification may apply to testing finished machined parts provided the parts can meet the basic testability requirements, such as size, contour, metallurgical structure, and thickness.
Standard

Inspection, Ultrasonic Product Over 0.5 Inch (12.7 mm) Thick

2010-01-05
HISTORICAL
AMS2630C
This specification covers procedures for ultrasonic inspection, by pulse-echo procedures, of flat, rectangular, round, cylindrical, and contoured products having a thickness or cross-sectional dimension greater than 0.50 inch (12.7 mm), using either contact or immersion methods, and using the longitudinal-wave or shear-wave modes or combinations of the two, as necessary. This specification may apply to testing finished machined parts provided the parts can meet the basic testability requirements, such as size, contour, metallurgical structure, and thickness.
Standard

Inspection, Ultrasonic Product Over 0.5 Inch (12.7 mm) Thick

2018-08-08
CURRENT
AMS2630D
This specification covers procedures for ultrasonic inspection, by pulse-echo procedures, of flat, rectangular, round, cylindrical, and contoured products having a thickness or cross-sectional dimension greater than 0.5 inch (12.7 mm), using either contact or immersion methods, and using the longitudinal-wave or shear-wave modes or combinations of the two, as necessary. This specification may apply to testing finished machined parts provided the parts can meet the basic testability requirements, such as size, contour, metallurgical structure, and thickness.
Standard

Magnetic Particles, Nonfluorescent Dry Method

2008-11-20
CURRENT
AMS3040D
This specification covers nonfluorescent, magnetic particles having black, red, gray, or other color, as specified, supplied in the form of dry powders.
Standard

SOLUTION, FLUORESCENT PENETRANT Water Base

1991-10-01
HISTORICAL
AMS3158A
This specification covers a stable, noncorrosive, water-soluble, highly-penetrating, fluorescent solution which may, but need not, be diluted with an appropriate amount of water for use.
Standard

ULTRASONIC INSPECTION OF THIN MATERIALS 0.5 Inch (13 mm) and Thinner

1991-10-01
HISTORICAL
AMS2632
This specification covers the procedure for ultrasonic inspection of flat, contoured, and cylindrical products having a cross sectional thickness of 0.02 - 0.5 in. (0.5 - 13 mm). This specification does not apply to inspection of composite materials.
Standard

ULTRASONIC INSPECTION Product Over 0.5 In. (12.5 mm) Thick

1980-04-15
HISTORICAL
AMS2630A
This specification covers procedures for ultrasonic inspection of flat, rectangular, round, cylindrical, and contoured products having a thickness or cross-sectional dimension greater than 0.5 in. (12.5 mm) by pulse-echo procedure, using either contact or immersion methods, and using the longitudinal-wave or shear-wave modes or combinations of the two, as necessary. This specification may apply to testing finished machined parts provided the parts can meet the basic testability requirements, such as size, contour, metallurgical structure, and thickness.
X