Search Results

Vehicle dynamic control could improve vehicle performance. Vehicle stability is vital to the determination of vehicle dynamic control strategy. The phase plane method is one of the most common methods to judge vehicle stability. To determine the 4WS (four-wheel steering) vehicle stability status faster and more accurately, a novel method to assess the vehicle stability is based on the vehicle sideslip angle and angular velocity (β-β˙) phase plane. At first, the 2 DOF (degree of freedom) model with a nonlinear tire model is established to acquire β-β˙ phase plane. Then the boundary of the stability region generated by the current method is compared. A crosspoint-ellipse method is provided based on the boundary comparison with the ideal boundary. The boundary function determined by the crosspoint-ellipse method is fitted based on vehicle dynamic theory and the boundary analysis with different steering angles, velocity, and road adhesion coefficient.

Braking energy recovery is an important method for Battery Electric Vehicle (BEV) to save energy and increase driving range. The vehicle braking system performs regenerative braking control based on driver operations. Different braking operations have a significant impact on energy recovery efficiency. This paper proposes a method for planning the braking process of a BEV based on the Intelligent Vehicle Infrastructure Cooperative System (IVICS). By actively planning the braking process, the braking energy recovery efficiency is improved. Vehicles need to decelerate and brake before entering a curve. The IVICS is used to obtain information about the curve section ahead of the vehicle's driving route. Then calculating the reference speed of the curve, and obtaining the vehicle's braking target in advance, so as to actively plan the vehicle braking process.

This paper proposes a new method of predicting the sound absorption performance of polymer wool using artificial neural networks (ANN) model. Some important parameters of the proposed model have been adjusted to best fit the non-linear relationship between the input data and output data. What's more, the commonly used multiple non-linear regression model is built to compare with ANN model in this study. Measurements of the sound absorption coefficient of polymer wool based on transfer function method are also performed to determine the sound absorption performance according to GB/T18696. 2-2002 and ISO10534- 2: 1998 (E) standards. It is founded that predictions of the new model are in good agreement with the experiment results.

When dump trucks unload dusty materials, dust particles with a diameter of 1 to 75 microns slide out of the dump body and float into the air. Dust particles naturally settle down spending a few hours, which causes air pollution. People who work in this environment daily suffer serious physical harm. To study the movement of dust particles during the unloading process, a scaled-down model is used to simulate the process of dump truck unloading gravel, and a high frame rate camera is used to record the movement trajectory of dust particles during the unloading process. In this paper, by observing the movement process of unloading dust particles by dump trucks, based on the principle of dynamics, a mathematical model describing the unloading of dust particles in the dump body and a mathematical model of the diffusion of dust particles in the air are established. Take the small gravel sampled at the construction site as an example of the experiment.

Compared to passenger cars, commercial vehicles have relatively high fuel and energy consumption, relatively high average annual driving mileage, and a wide range of use. Therefore, energy-saving management of commercial vehicles is crucial. For multi-axle distributed pure electric drive commercial vehicles, a dynamic allocation control strategy for driving torque based on energy consumption optimization is proposed. First, the basic idea of the driving torque distribution control strategy was analyzed and a relevant mathematical model was established. Then, the offline optimization of the distribution coefficients of the driving torque for each axle was carried out through a genetic algorithm, and the entire vehicle driving force distribution strategy using the distribution coefficients as an online lookup table was determined.

There are a large number of curves and slopes in the mountainous areas. Unreasonable acceleration and deceleration in these areas will increase the burden of the brake system and the fuel consumption of the vehicle. The main purpose of this paper is to introduce a speed planning and promotion system for commercial vehicles in mountainous areas. The wind, slope, curve, engine brake, and rolling resistances are analyzed to establish the thermal model of the brake system. Based on the thermal model, the safe speed of the brake system is acquired. The maximum safe speed on the turning section is generated by the vehicle dynamic model. And the economic speed is calculated according to the fuel consumption model. The planning speed is provided based on these models. This system can guide the driver to handle the vehicle speed more reasonably.