Refine Your Search

Search Results

Viewing 1 to 19 of 19
Standard

Excavator and Backhoe Hand Signals

1981-05-01
HISTORICAL
J1307_198105
This Recommended Practice applies to mobile excavators, as defined in SAE J/ISO 6165, Earthmoving MachineryÑBasic TypesÑVocabulary, and backhoes as defined in SAE J326, Nomenclature Hydraulic Backhoes. Purpose This document provides a set of uniform hand signals for use by a signalman to direct an operator in the movement of the load or the working equipment or travel of a mobile excavator or backhoe.
Standard

Excavator, Mini-Excavator, and Backhoe Hoe Bucket Volumetric Rating

1993-06-01
HISTORICAL
J296_199306
This SAE Standard provides a uniform method for determining rated and struck capacity for buckets used on excavators, mini-excavators, and backhoes as defined in SAE J1057 and equipped with hoe attachment. Calculations are based on the inside physical dimensions of the bucket only, without use of optional side cutters, spill guards, teeth, or other accessories and without regard to bucket action provided by any specific machine. This document does not cover shovel, clam, or dragline buckets described in SAE J67 or loader buckets described in SAE J742.
Standard

Excavator, Mini-excavator, and Backhoe Hoe Bucket Volumetric Rating

1977-03-01
HISTORICAL
J296_197703
This SAE Standard provides a uniform method for determining rated and struck capacity for buckets used on excavators, mini-excavators, and backhoes as defined in SAE J1057 and equipped with hoe attachment. Calculations are based on the inside physical dimensions of the bucket only, without use of optional side cutters, spill guards, teeth, or other accessories and without regard to bucket action provided by any specific machine. This document does not cover shovel, clam, or dragline buckets described in SAE J67 or loaders buckets described in SAE J742.
Standard

Hydraulic Backhoe Lift Capacity

1986-03-01
HISTORICAL
J31_198603
This standard applies to hydraulically operated backhoes (see SAE J49). This standard describes a uniform "over end" and "full swing arc" lifting capacity rating for backhoes. It is based on the actual capacity of the machine to lift and support a load under stable conditions. Rated lift capacities will be specified for both the boom and the dipperstick and will be shown on a lift capacity chart (see Fig. 1).
Standard

Hydraulic Excavator Lift Capacity Calculation and Test Procedure

1988-11-01
HISTORICAL
J1097_198811
This standard provides a uniform method to calculate and a test procedure to validate hydraulic excavator lift capacity. It establishes definitions and specifies machine conditions for calculations in Section 1 and identifies the validating test procedure in Section 2.
Standard

Hydraulic Excavator Lift Capacity Calculation and Test Procedure

2005-12-05
HISTORICAL
J1097_200512
This standard provides a uniform method to calculate and a test procedure to validate hydraulic excavator lift capacity. It establishes definitions and specifies machine conditions for calculations in Section 1 and identifies the validating test procedure in Section 2.
Standard

Hydraulic Excavator Lift Capacity Calculation and Test Procedure

1975-02-01
HISTORICAL
J1097_197502
This standard provides a uniform method to calculate and a test procedure to validate hydraulic excavator lift capacity. It establishes definitions and specifies machine conditions for calculations in Section 1 and identifies the validating test procedure in Section 2.
Standard

Hydraulic Excavator Lift Capacity Calculation and Test Procedure

1988-09-01
HISTORICAL
J1097_198809
This standard provides a uniform method to calculate and a test procedure to validate hydraulic excavator lift capacity. It establishes definitions and specifies machine conditions for calculations in Section 1 and identifies the validating test procedure in Section 2.
Standard

Hydraulic Excavator Operator Controls

1978-04-01
HISTORICAL
J1177_197804
This standard covers mobile hydraulic excavator controls and the specific arrangement and direction of motion for the primary controls. This standard applies to mobile hydraulic excavators as described in ISO 7135 - Earthmoving Machinery - Hydraulic excavators - Terminology and commercial specifications, and ISO 6165- Earthmoving Machinery - Basic Types - Vocabulary. Purpose This standard is intended as a guide for designing uniform two lever type operating controls for mobile hydraulic excavators, either wheel mounted or crawler mounted on independently reversible tracks.
Standard

Hydraulic Excavator Operator Controls

2012-01-09
HISTORICAL
J1177_201201
This standard covers mobile hydraulic excavator controls and the specific arrangement and direction of motion for the primary controls. This standard applies to mobile hydraulic excavators as described in ISO 7135—Earthmoving machinery—Hydraulic excavators—Terminology and commercial specifications, and ISO 6165—Earthmoving machinery—Basic types—Vocabulary.
Standard

Hydraulic Excavator and Backhoe Digging Forces

1977-03-01
HISTORICAL
J1179_197703
This document applies to all hydraulic excavators and backhoes that are either crawler mounted or rubber tire mounted, with or without outrigger members, identified in SAE J1116 as earthmoving machines and defined in SAE J/ISO 6165. Purpose This document is to provide a uniform method of determining digging forces for hydraulic excavators and backhoes.
Standard

Hydraulic Excavator and Backhoe Digging Forces

1990-02-01
HISTORICAL
J1179_199002
This document is to provide a uniform method of determining digging forces for hydraulic excavators and backhoes. This document applies to all hydraulic excavators and backhoes that are either crawler mounted or rubber tire mounted, with or without outrigger members, identified in SAE J1116 as earthmoving machines and defined in SAE J1057.
Standard

Hydraulic Excavator and Backhoe Digging Forces

2002-12-23
HISTORICAL
J1179_200212
This document applies to all hydraulic excavators and backhoes that are either crawler mounted or rubber tire mounted, with or without outrigger members, identified in SAE J1116 as earthmoving machines and defined in SAE J/ISO 6165. Purpose This document is to provide a uniform method of determining digging forces for hydraulic excavators and backhoes.
Standard

Lift Capacity Calculation Method Scrap and Material Handlers

2003-05-16
HISTORICAL
J2518_200305
This SAE Standard provides a uniform method to calculate the lift capacity of scrap and material handlers, establishes definitions and specifies machine conditions for the calculations. This document applies to scrap and material handlers as defined in SAE J2506 that have a 360 degrees continuous rotating upper structure. It does not apply to equipment that is incapable of lifting a load completely off the ground. This document applies to those machines that are crawler, wheel, rail and pedestal or stationary mounted. Purpose The purpose of this SAE document is to establish a consistent, repeatable means of determining the lift capacity for the types of equipment contained therein. Applicability Lift capacity calculations and the resulting rated lift capacity chart are developed by the equipment manufacturer or the entity that assembles and or modifies basic components to produce the complete machine for each machine model that is produced.
Standard

Nomenclature and Dimensions for Hydraulic Excavators

1984-11-01
HISTORICAL
J1193_198411
The purpose of this recommended practice is to establish a uniform method of providing dimensional specifications and nomenclature for mobile hydraulic excavators. This recommended practice applies to hydraulic excavators as defined in SAE Standard J1057.
X