Search Results

Standard

Automotive Starter Solenoid Remanufacturing Procedures

2008-11-26

CURRENT

J2242_200811

These remanufacturing procedures are recommended guidelines for use by remanufacturers of starter solenoids to promote consistent reliability, durability, and safety of remanufactured starters. Installation of remanufactured or rebuilt products is often an economical way to repair a vehicle even though the products may not be identical to original equipment parts. Before processing any part, a remanufacturer should determine if the original design and present condition of the core is suitable for remanufacturing so as to provide durable operation of the part as well as acceptable performance when installed on the vehicle. The remanufacturer should also consider the safety aspects of the product and any recommendations of the original manufacturers related to remanufacturing or rebuilding their product.

Standard

Considerations for Suspension Modification

2019-10-09

CURRENT

J2492_201910

The scope of this document is limited specifically to the following types of passenger vehicles: automobiles, light trucks, and sport/utility vehicles. This document addresses modifications as they apply to legal use of the vehicle, and examines suspension modification as it applies to stock (as manufactured) ride height, and changed (raised or lowered) ride height. Note that modifications of ride height are considered, exclusive of wheel and/or tire modifications, which can also have potentially serious side effects, and are outside the scope of this document.

Standard

Considerations for Suspension Modification

1999-06-01

HISTORICAL

J2492_199906

The scope of this document is limited specifically to the following types of passenger vehicles: automobiles, light trucks, and sport/utility vehicles. This document addresses modifications as they apply to legal use of the vehicle, and examines suspension modification as it applies to stock (as manufactured) ride height, and changed (raised or lowered) ride height. Note that modifications of ride height are considered, exclusive of wheel and/or tire modifications, which can also have potentially serious side effects, and are outside the scope of this document.

Standard

Engine Water Pump Remanufacture Procedures and Acceptance Criteria

2007-08-16

CURRENT

J1916_200708

This SAE Recommended Practice establishes remanufacturing procedures and acceptance criteria for engine water pumps.

Standard

LOW-SPEED IMPACT BUMPER SYSTEM TEST PROCEDURE FOR PASSENGER VEHICLES

1997-04-01

HISTORICAL

J2319_199704

The scope of this SAE Recommended Practice is restricted to the testing of original equipment on passenger vehicles and to provide for a uniform industry test procedure.

Standard

Low-Speed Impact Bumper System Test Procedure for Passenger Vehicles

2019-10-03

CURRENT

J2319_201910

The scope of this SAE Recommended Practice is restricted to the testing of original equipment on passenger vehicles and to provide for a uniform industry test procedure.

Standard

Performance Assurance of Remanufactured, Hydraulically-Operated Rack and Pinion Steering Gears

2007-08-16

CURRENT

J1890_200708

In order to insure that the remanufactured and/or rebuilt steering gear has and maintains the reliability and performance associated with a new OEM steering gear, it is essential that the following procedures be followed; if in-house engineering capabilities are limited, it may be necessary to consult with an outside laboratory to insure all testing methods used meet with the requirements outlined in this paper.

Standard

Performance Engine Building Recommended Practices

2019-10-03

CURRENT

J2379_201910

This SAE Recommended Practice applies to the function of building reciprocating spark-ignition engines which are used in conjunction with standard and high-performance ancillary components in applications intended to achieve a minimum of 1 hp/in3. This document does not apply to rebuilt engines which may only be partially repaired with little or no machining, nor does it apply to second-hand or used engines.

Standard

Performance Engine Building Recommended Practices

1997-08-01

HISTORICAL

J2379_199708

This SAE Recommended Practice applies to the function of building reciprocating spark-ignition engines which are used in conjunction with standard and high-performance ancillary components in applications intended to achieve a minimum of 1 hp/in3. This document does not apply to rebuilt engines which may only be partially repaired with little or no machining, nor does it apply to second-hand or used engines.

Standard

RADIAL SEAL NOMENCLATURE AND GLOSSARY

1976-11-01

HISTORICAL

J111B_197611

The purpose of this SAE Recommended Practice is to provide a glossary of radial seal terms and nomenclature which are normally encountered in the design, manufacture, installation, testing, inspection, and failure mode analysis of radial seals. The information will aid in the understanding and communication of hose people associated with radial seals.

Standard

SEALS - TERMINOLOGY OF RADIAL LIP

1988-06-01

HISTORICAL

J111_198806

The purpose of this SAE Recommended Practice is to provide a glossary of radial seal terms and nomenclature which are normally encountered in the design, manufacture, installation, testing, inspection, and failure mode analysis of radial seals. The information will aid in the understanding and communication of those people associated with radial seals.

Standard

SEALS—TERMINOLOGY OF RADIAL LIP

1995-07-01

HISTORICAL

J111_199507

The purpose of this SAE Recommended Practice is to provide a glossary of radial seal terms and nomenclature which are normally encountered in the design, manufacture, installation, testing, inspection, and failure mode analysis of radial seals. The information will aid in the understanding and communication of those people associated with radial seals.

Standard

SEALS—TERMINOLOGY OF RADIAL LIP

1979-04-01

HISTORICAL

J111C_197904

The purpose of this SAE Recommended Practice is to provide a glossary of radial seal terms and nomenclature which are normally encountered in the design, manufacture, installation, testing, inspection, and failure mode analysis of radial seals. The information will aid in the understanding and communication of those people associated with radial seals.

Standard

Seals--Terminology of Radial Lip

2002-10-25

CURRENT

J111_200210

The purpose of this SAE Recommended Practice is to provide a glossary of radial seal terms and nomenclature which are normally encountered in the design, manufacture, installation, testing, inspection, and failure mode analysis of radial seals. The information will aid in the understanding and communication among those people associated with radial seals.

Standard

Starter Armature Remanufacturing Procedures

2008-11-26

CURRENT

J2240_200811

These remanufacturing procedures are recommended guidelines for use by remanufacturers of starter armatures to promote consistent reliability, durability, and safety of remanufactured starters. Installation of remanufactured or rebuilt products is often an economical way to repair a vehicle even though the products may not be identical to original equipment parts. Before processing any part, a remanufacturer should determine if the original design and present condition of the core is suitable for remanufacturing so as to provide durable operation of the part as well as acceptable performance when installed on the vehicle. The remanufacturer should also consider the safety aspects of the product and any recommendations of the original manufacturers related to remanufacturing or rebuilding their product.

Standard

TOWABILITY DESIGN CRITERIA AND EQUIPMENT USE— PASSENGER CARS, VANS, AND LIGHT-DUTY TRUCKS

1994-02-02

HISTORICAL

J1142_199402

This SAE Recommended Practice describes the type of equipment commonly used with towing equipment, provides information to calculate safe steering loads, and outlines design criteria.

Standard

TOWED VEHICLE/TOW EQUIPMENT ATTACHMENT TEST PROCEDURE—PASSENGER CARS, VANS, AND LIGHT-DUTY TRUCKS

1994-02-01

HISTORICAL

J1143_199402

This SAE Recommended Practice provides a means to observe and evaluate a towed vehicle under a variety of road conditions to determine its behavior. The drivetrain should be evaluated by conducting SAE J1144.

Standard

Towability Design Criteria and Equipment Use - Passenger Cars, Vans, and Light-Duty Trucks

2019-10-28

CURRENT

J1142_201910

This SAE Recommended Practice describes the type of equipment commonly used with towing equipment, provides information to calculate safe steering loads, and outlines design criteria.

Standard

Towed Vehicle/Tow Equipment Attachment Test Procedure - Passenger Cars, Vans, and Light-Duty Trucks

2019-10-24

CURRENT

J1143_201910

This SAE Recommended Practice provides a means to observe and evaluate a towed vehicle under a variety of road conditions to determine its behavior. The drivetrain should be evaluated by conducting SAE J1144.

Standard

Towing Equipment Ratings and Practices

1999-08-01

HISTORICAL

J2512_199908

This SAE Recommended Practice applies to all trucks that are equipped with armlift bodies, carrier bodies, wheel lift bodies, wrecker, and underlift bodies. Additional rating methods are provided for tow slings, truck hitches, and chain assemblies.