Search Results

This paper describes an analytical process for the design of a brake shoe assembly that consists of the linings, shoe table, webs, and rivets. One fundamental performance requirement for the brake shoe assembly is that the linings will not lose clamp force within the desired service life. Key elements of the analytical process involved developing an FEA model with given loading conditions and developing a mathematical model to study the influence parameters of the forces acting on the lining.

Although the methodology of straight bevel gear tooth form generation has been known for quite some time, few references are available in the literature. Presented in this paper are the general numerical procedures of spherical involute and octoid tooth form generations. We have proven that a tooth form generated from the latter approach, by simulating the rotation of a crown gear, matches exactly with the one from the former approach of unwraping a wire from a base circle. The advantage of using general numerical procedures rather than closed form equations is the flexibility of generating both standard and modified gear tooth profiles. In making the forging die, the gear tooth form must be developed with considerations of both the theoretical optimal geometry, and the dimensional compensation for heat treatment distortion.

To validate the integrity of a commercial vehicle's exhaust system's structural design is a challenging job. An integrated approach to use both simulation/modeling and hardware testing must be employed to reduce product development cost. In addition to the considerations of the geometry and configuration specs of 70-90 parts and joints as well as material's thermal and mechanical property data in model development, representative loading must be used. For base excitation type of loading, such as the one experienced by the vehicle's exhaust system, one must decide whether to conduct the time domain transient analysis or frequency domain random vibration analysis. Although both methods are well known, few discussions can be found in the literature regarding their effective use in the framework of product design and development. Based on our study, the random vibration method should be used first for identifying high stress locations in the system and for design optimization.

In recent years, several transit agencies have tested buses equipped with hybrid powertrain systems. It has been reported that hybrid powertrains have significant advantages over conventional diesel engine systems, in the area of emissions and fuel economy performance. Presented in this paper are engineering issues and suggestions from an auto component supplier point of view in the design of such a powertrain system. The particular system being considered consists of a downsized diesel engine, a generator, a battery package, two identical AC induction motors, and gearbox systems for the left and right driven wheels. The assembly is supported by an H-shaped suspension sub-structure uniquely designed to achieve the “ultra-low floor” configuration. Our discussion covers the system performance, as well as the durability issues. In particular, the presentation focuses on the durability and the design layout of the gearbox and suspension substructure.

The uniqueness of heavy and medium duty vehicle powertrain design, compared to that of passenger cars, is two fold: vast variations exist from vehicle to vehicle because of mission requirements, and powertrain components are sourced from a diverse group of suppliers. Vehicle powertrain design involves selection of the appropriate major components, such as the engine, clutch, transmission, driveline, and axle. At this design stage the main focus is on power matching, to ensure that the vehicle's performance meets specifications of gradability, maximum speed, acceleration, fuel economy, and emissions[1, 2, 3, 4 and 5]. The general practice also demands that the durability of the drivetrain components for the intended vocation or application be verified. Equally important but often neglected in the design phase is the system's NVH (Noise Vibration and Harshness) performance, such as torsional vibration, U-joint excitation, and gear rattle.

A method for predicting the propensity of a drum brake system to produce noise is presented. The method utilizes finite element models of the individual components of the drum brake system, which have been assembled into the system model of the brake assembly. An important step in this process is the tuning of the dynamic characteristics of the FEA model to ensure validation with experimental tests. Friction is the key element, which defines the behavior of the drum brake system. The system FEA model is assembled by coupling the lining and drum at the contact interface to simulate the friction interaction. This process produces an asymmetric stiffness matrix. A complex eigenvalue analysis identifies the system dynamic characteristics such as the frequency and damping for each vibration mode. The damping values reveal which modes are unstable and therefore likely to produce noise.

Automotive transmission design quality is generally judged by the vehicle's performance. Its acceleration, gradeability, maximum speed, terminal speeds, fuel economy and emissions provide these measures. These performance characteristics are optimized through the design process. This process, however, is iterative in nature and requires informed decision making to produce a design that is cost effective and excels in quality. In modern engineering, computer simulation plays an important role in the product design and development process. This paper provides a case study of the design and analysis of a heavy truck automatic transmission. It demonstrates the use of computer simulation models in generating and evaluating innovative design ideas.

Although computer models for vehicle and sub-system performance simulations have been developed and used extensively in the past several decades, there is currently a need to enhance the overall availability of these types of tools. Increasing demands on vehicle performance targets have intensified the need to obtain rapid feedback on the effects of vehicle modifications throughout the entire development cycle. At the same time, evolution of the PC and development of Web-based applications have contributed to the availability, accessibility, and user-friendliness of sophisticated computer analysis. Web engineering is an ideal approach in supporting globalization and is a cost-effective design-analysis integration business strategy. There is little doubt that this new approach will have positive impacts on product cost, quality, and development cycle time. This paper will show how Microsoft Excel and the Web can be powerful and effective tools in the development process.

Nowadays, developing web (World Wide Web) engineering is considered to be a top priority task in many companies. A corporate web information center with broad coverage to support a company's worldwide engineering activities can make the product development and customer support more efficient. First, the archived, readily available product information, knowledge database, and user friendly engineering tools can ease up the more ever demanding engineering jobs. Second, the convenient information storage, retrieval systems and hyperlinks on the web should ensure effective communications among engineers, customers, and suppliers. However, without in-depth planning, the full benefits of web engineering cannot be realized. To be effective, other companion engineering programs must also be instated. This paper reviews the experience we have gained in utilizing web engineering for product development and customer support.

Welding has been used extensively in automotive components design due to its flexibility to be applied in manufacturing, high structural strength and low cost. To improve fuel economy and reduce material cost, weight reduction by optimized structural design has been a high priority in auto industry. In the majority of heavy duty vehicle's chassis components design, the ability to predict the mechanical performance of welded joints is the key to success of structural optimization. FEA (finite element analysis) has been used in the industry to analyze welded parts. However, mesh sensitivity and material properties have been major issues due to geometry irregularity, metallurgical degradation of the base material, and inherent residual stress associated with welded joints. An approach, equilibrium-equivalent structural stress method, led by Battelle and through several joint industrial projects (JIP), has been developed.