Search Results

Two-phase capillary loops are being extensively studied as heat collection and rejection systems for space applications as they appear to satisfy several requirements like low weight, low volume, temperature control under variable heat loads and/or heat sink, operation under on ground and micro gravity conditions, simplicity of mounting and heat transfer through tortuous paths. In 1998–2000 Alenia defined and Lavochkin Association developed the Deployable Radiator on the base of honeycomb panels, axial grooved heat pipes and Loop Heat Pipe. It was designed for on-ground testing.

Most of current jet aircraft circulate fuel on the airframe to match heat loads with available heat sink. The demands for thermal management in wide range of air vehicle systems are growing rapidly along with the increased mission power, vehicle survivability, flight speeds, and so on. With improved aircraft performance and growth of heat load created by Aircraft Mounted Accessory Drive (AMAD) system and hydraulic system, effectively removing the large amount of heat load on the aircraft is gaining crucial importance. Fuel is becoming heat transfer fluid of choice for aircraft thermal management since it offers improved heat transfer characteristics and offers fewer system penalties than air. In the scope of this paper, an AMESim model is built which includes airframe fuel and hydraulic systems with AMAD gearbox of a jet trainer aircraft. The integrated model will be evaluated for thermal performance.

A 3D computer model named AIPAC (Aircraft Ice Protection Analysis Code) suitable for thermal ice protection system parametric studies has been developed. It was derived from HASPAC, which is a 2D anti-icing model developed at Wichita State University in 2010. AIPAC is based on the finite volumes method and, similarly to HASPAC, combines a commercial Navier-Stokes flow solver with a Messinger model based thermodynamic analysis that applies internal and external flow heat transfer coefficients, pressure distribution, wall shear stress and water catch to compute wing leading edge skin temperatures, thin water flow distribution, and the location, extent and rate of icing. In addition, AIPAC was built using a transient formulation for the airfoil wall and with the capability of extruding a 3D surface grid into a volumetric grid so that a layer of ice can be added to the computational domain.

The transition towards More Electric Aircraft (MEA) architectures has challenges relating to integration of power electronics with the starter generator system for on-engine application. To efficiently operate the power electronics in the hostile engine environment at high switching frequency and for better thermal management, use of silicon carbide (SiC) power devices for a bi-directional power converter is examined. In this paper, development of a 50 kVA bi-directional converter operating at an ambient temperature of about 2000C is presented. The design and operation of the converter with details of control algorithm implementation and cooling chamber design are also discussed.

Changes in air transport operating environment are examined to show how they are beginning to change the design and use of transport aircraft. The essential requirement of the changing market is seen to be a new flexibility to provide (a) versatility in the quantity of normal on-demand seats provided in each market, (b) suitability for high capacity seasonal bulk class operations, and (c) suitability for expanding the cargo load capability on selected passenger flights. Airplane characteristics and advanced technology to satisfy the requirements of the new operating flexibility are discussed.

Commonality of flight deck geometry, airplane subsystems, controls and displays, airplane handling characteristics and crew procedures between 757/767 offers the potential for common pilot type rating on different airplanes with like crew complement: 2-crew 757/767's and 3-crew 757/767's.

The 94 GHz MMW airborne radar system that provides a runway image in adverse weather conditions is now undergoing tests at Wright-Patterson Air Force Base (WPAFB). This system, which consists of a solid state FMCW transceiver, antenna and digital signal processor, has an update rate of 10 times per second, 0.35° azimuth resolution and up to 3.5 meter range resolution. The radar B scope (range versus azimuth) image, once converted to C scope (elevation versus azimuth), is compatible with the standard TV presentation and can be displayed on the Head Up Display (HUD) or Head Down Display (HDD) to aid the pilot during landing and takeoff in limited visibility conditions.

A new concept of Head Up Display is presented, using the windshield as a transparent screen. This breakthrough technology does not need the use of complex combiner, bulky optics and overhead projection unit. The novel system uses several holographic optical elements to perform a 3D stereoscopic display, with the ability to present floating graphical objects in a large field of view. Augmented Reality display will be possible, increasing considerably the User Experience and situational awareness, without the need of wearing a bulky and complex Head Mounted Display.

A 3D Stereoscopic Head-Up Display (HUD) using direct projection on a transparent screen is presented. Symbol incrustation in conformity with the landscape is performed through the use of simulated collimation offering a large eye-box, in excess of conventional HUD. The use of spectral glasses for our transparent screen was decided as most commonly used polarizing or active glasses were not adapted. Furthermore it gave ususeful green laser attack protection.

Boiling heat transfer in a water heat pipe is investigated with the objective of relating heat flux and temperature drop across the evaporator. Nucleate boiling has been postulated as the heat transfer mechanism at and near the wall. A correlation has been obtained that relates evaporator heat flux and temperature drop to various screen-wick and working fluid properties. It is shown to agree well with other available experimental data.

Cockpit Display System (CDS) suppliers need to now prepare for the cockpits of the future. The architecture, design and ergonomics of the cockpits have to be re-assessed in order to place the pilot at the center of the system, while taking into account the increasing complexity of the systems. Human Machine Interfaces (HMI) have to be simplified and made more intuitive. Thus, there is a need for dedicated HMI design tools and human-factor-oriented processes that are able to support both the required flexibility in the display creation for various types of interactive displays and the increasing demand for safety in avionics displays. This paper presents a COTS approach to these needs, which combines the SCADE Display model-based HMI software design solution, designed from the ground up for displays with safety objectives, with an associated prototyping and development process largely based upon human factors assessment.

A hydrogen economy is an increasingly popular solution to lower global carbon dioxide emissions. Previous research has been focused on the economic conditions necessary for hydrogen to be cost competitive, which tends to neglect the effectiveness of greenhouse gas mitigation for the very solutions proposed. The holistic carbon footprint assessment of hydrogen production, distribution, and utilization methods, otherwise known as “well-to-wheels” carbon intensity, is critical to ensure the new hydrogen strategies proposed are effective in reducing global carbon emissions. When looking at these total carbon intensities, however, there is no single clear consensus regarding the pathway forward. When comparing the two fundamental technologies of steam methane reforming and electrolysis, there are different scenarios where either technology has a “greener” outcome.

Cockpit displays need to be substantially improved to serve the goals of situational awareness, conflict detection, and path replanning, in Free Flight. This paper describes the design of such an advanced cockpit display, along with an initial simulation based usability evaluation. Flight crews were particularly enthusiastic about color coding for relative altitude, dynamically pulsing predictors, and the use of 3-D flight plans for alerting and situational awareness.

A unique heat exchanger has been developed with potential applications for cooling high power density electronics and perhaps high energy laser mirrors. The device was designed to absorb heat fluxes of approximately 50 w/cm2 (158,000 Btu/hr.ft2) with a low thermal resistance, a high surface temperature uniformity and very low hydraulic pumping power. A stack of thin copper orifice plates and spacers was bonded together and arranged to provide liquid jet impingement heat transfer on successive plates. This configuration resulted in effective heat transfer coefficients, based on the prime surface, of about 85,000 w/m2 °C (15,000 Btu/hr.ft2 °F) and 1.8 watts (.002 HP) hydraulic power with liquid Freon 11 as coolant.

The flow through most turbomachinery blade rows is characterized by unsteady, viscous, transitional flow. The accurate prediction of the onset of transition from laminar to turbulent flow is essential for calculating heat transfer and performance quantities. The purpose of this investigation is to evaluate the accuracy of four different algebraic transition models which have been combined with an algebraic turbulence model. Numerical experiments have been performed for flow through a turbine rotor cascade with heat transfer, and a cascade of compressor blades. In addition, a study was performed to determine the effects of the computational grid density on the transition location.

In an effort to help future crewed spacecraft thermal control analysts understand the characteristics of one-and two-loop Active Thermal Control Systems (ATCS), a comparison was made between the one- and two-loop ATCS architectures officially proposed for the Crew Exploration Vehicle (CEV) in Design Analysis Cycle 1 (DAC1) and DAC2, respectively. This report provides a description of each design, along with mass and power estimates derived from their respective Master Equipment List (MEL) and Power Equipment List (PEL). Since some of the components were sized independent of loop architecture (ex. coldplates and heat exchangers), the mass and power for these components were based on the MEL and PEL of the most mature design (i.e. two-loop architecture). The mass and power of the two architectures are then compared and the ability of each design to meet CEV requirements is discussed.

This paper presents an approach to numerically simulate greenhouse windnoise. The term “greenhouse windnoise” here describes the sound transferred to the interior through the glass panels of a series vehicle. Different panels, e.g. the windshield or sideglass, are contributing to the overall noise level. Attached parts as mirrors or wipers are affecting the flow around the vehicle and thus the pressure fluctuations which are acting as loads onto the panels. Especially the wiper influence and the effect of different wiper positions onto the windshield contribution is examined and set in context with the overall noise levels and other contributors. In addition, the effect of different flow yaw angles on the windnoise level in general and the wiper contributions in particular are demonstrated. As computational aeroacoustics requires accurate, highly resolved simulation of transient and compressible flow, a Lattice-Boltzmann approach is used.

This paper describes a computational technique for prediction of the flow and thermal environment in the Space Shuttle Solid Rocket Motor field joint cavities. The SRM field joint hardware has been tested with a defect in the insulation. Due to this defect, the O-ring gland cavities are pressurized during the early part of the ignition. A computer model has been developed to predict the flow and thermal environment through the simulated flaw, during the pressurization of the field joint. The transient mass, momentum, and energy conservation equations in the flow passage in conjunction with the thermodynamic equation of state are solved by a fully implicit iterative numerical procedure. Since this is a conjugate flow and heat transfer problem, wall temperatures are calculated by solving the one-dimensional transient heat conduction equation in the solid along with the other governing equations. The pressure and temperature predictions have been compared with the test data.

A concept for a miniature, mechanically pumped two-phase cooling loop with high thermal performance was developed. In this feasibility study, a miniature, annular gear pump was inserted into the liquid line of a two-phase LHP-type loop architecture. In contrast to capillary-pumped systems, the functions of liquid pumping and evaporative heat transfer were separated and could be optimized independently. The cooling system was tested in terms of heat transport capability, performance and stability using water as the working fluid. The results show a high heat transfer coefficient of >11 W/(cm2K), a high heat transport capability of >70 W/cm2, and stable working behavior in all orientations. These results were obtained with a device using a simple loop architecture and an evaporator design that was not optimized for this kind of operation.