Search Results

The paper describes a numerical study, supported by experiments, on light aircraft 2-Stroke Direct Injected Diesel engines, typically rated up to 110 kW (corresponding to about 150 imperial HP). The engines must be as light as possible and they are to be directly coupled to the propeller, without reduction drive. The ensuing main design constraints are: i) in-cylinder peak pressure as low as possible (typically, no more than 120 bar); ii) maximum rotational speed limited to 2600 rpm. As far as exhaust emissions are concerned, piston aircraft engines remain unregulated but lack of visible smoke is a customer requirement, so that a value of 1 is assumed as maximum Smoke number. For the reasons clarified in the paper, only three cylinder in line engines are investigated. Reference is made to two types of scavenging and combustion systems, designed by the authors with the assistance of state-of-the-art CFD tools and described in detail in a parallel paper.

Different Airbus Helicopters main rotor blade profiles were tested in different icing wind tunnels and for different icing conditions. One of the objectives of the accretion tests was to validate the use of 2D icing scaling laws established for fixed wing aircraft on helicopter blade profiles. Therefore, ice shapes resulting from tests with the same icing similarity parameters are compared to each other allowing the assessment of icing scaling laws for helicopter applications. This paper presents the icing scaling laws used at Airbus Helicopters on blade profiles, the different test set ups and test models and it presents the comparison of the ice shapes collected during the icing wind tunnel test campaigns.

A helicopter blade profile was tested in the DGA Aero-engine Testing's icing altitude test facility S1 in Saclay, France during the winter of 2013/2014. The airfoil was a helicopter main rotor OA312 blade profile made out of composite material and with a metallic erosion shield. Dry air and ice accretion tests have been performed in order to assess the iced airfoil's aerodynamic behaviour. Several icing conditions were tested up through Mach numbers around 0.6. This paper presents the test setup, the test model and some of the test results. The test results presented in this paper include the ice shapes generated as well as dry air and iced airfoil lift and drag curves (polars) which were obtained with the real ice shapes on the airfoil.

The term “3 inch ice shapes” has assumed numerous definitions throughout the years. At times it has been used to generally characterize large glaze ice accretions on the major aerodynamic surfaces (wing, horizontal stabilizer, vertical stabilizer) for evaluating aerodynamic performance and handling qualities after a prolonged icing encounter. It has also been used as a more direct criterion while determining or enforcing sectional ice shape characteristics such as the maximum pinnacle height. It is the authors’ observation that over the years, the interpretation and application of this term has evolved and is now broadly misunderstood. Compounding the situation is, at present, a seemingly contradictory set of guidance among (and even within) the various international regulatory agencies resulting in an ambiguous set of expectations for design and certification specialists.

A 3D computer model named AIPAC (Aircraft Ice Protection Analysis Code) suitable for thermal ice protection system parametric studies has been developed. It was derived from HASPAC, which is a 2D anti-icing model developed at Wichita State University in 2010. AIPAC is based on the finite volumes method and, similarly to HASPAC, combines a commercial Navier-Stokes flow solver with a Messinger model based thermodynamic analysis that applies internal and external flow heat transfer coefficients, pressure distribution, wall shear stress and water catch to compute wing leading edge skin temperatures, thin water flow distribution, and the location, extent and rate of icing. In addition, AIPAC was built using a transient formulation for the airfoil wall and with the capability of extruding a 3D surface grid into a volumetric grid so that a layer of ice can be added to the computational domain.

The in-flight ice accretion simulations are typically performed using a quasi-steady formulation through a multi-step approach. As the ice grows, the geometry changes, and an adaptation of the fluid volume mesh used by the airflow and droplet-trajectory solver is required. Re-meshing or mesh deformation are generally employed to do that. The geometries formed are often complex ice shapes increasing the difficulty of the re-meshing process, especially in three-dimensional simulations. Consequently, difficulties are encountered when trying to automate the process. Contrary to the usual body-fitted mesh approach, the use of immersed boundary methods (IBMs) allows solving, or greatly reducing, this problem by removing the mesh update, facilitating the global automation of the simulation. In the following paper, an approach to perform the airflow and droplet trajectory calculations for three-dimensional simulations is presented. This framework utilizes only immersed boundary methods.

This paper describes the wing and engine ice protection system, used on all 777 aircraft. The 777 ice protection system is unique in two ways: it has an advanced control system which minimizes aircraft power consumption. In addition, the system was procured by the prime contractor, Boeing, as a fully integrated subsystem from a single supplier.

The 912 engine is a well known 4-cylinder horizontally opposed 4-stroke liquid-/air-cooled aircraft engine. The 912 family has a strong track record: 40 000 engines sold / 25 000 still in operation / 5 million flight hours annually. 88% of all light aircraft OEMs use Rotax engines. The 912iS is an evolution of the Rotax 912ULS carbureted engine. The “i” stands for electronic fuel injection which has been developed according to flight standards, providing a better fuel efficiency over the current 912ULS of more than 20% and in a range of 38% to 70% compared to other competitive engines in the light sport, ultra-light aircraft and the general aviation industry. BRP engineers have incorporated several technology enhancements. The fully redundant digital Engine Control Unit (ECU) offers a computer based electronic diagnostic system which makes it easier to diagnose and service the engine.

The business jet aircraft market continues to be a strong and growing market. Products must satisfy unique customer requirements. Significant competition in the market creates an entrepreneurial atmosphere that promotes aeronautical innovation. Examples of recent advancements are discussed. The expectation of dramatic future advances occurring within the business aircraft environment is unavoidable.

In this work, a newly developed iced-aircraft modeling tool is applied to wings, engine inlets, and helicopter rotors. The tool is based on a multiscale-physics, unstructured finite-volume CFD approach and is applicable to general purpose aircraft icing applications. The present approach combines an Eulerian-based droplet-trajectory solver that is loosely coupled, in a time-accurate manner, to a surface-film and ice-evolution model. The goal of the model is to improve the fidelity of ice accretion modeling on dynamic geometries and for three-dimensional ice shapes typical of helicopter rotors. The numerical formulation is discussed and presented alongside 2D and 3D static validation cases, and dynamic helicopter rotors. The present results display good validation for predicting ice shape on a variety of geometries, and a strong initial capability of modeling ice forming on helicopters in forward flight.

This work presents the implementation and validation efforts of a 3D ice accretion solver for aeronautical applications, MESS3D, based on the advanced Messinger model. The solver is designed to deal with both liquid phase and ice crystal cloud conditions. In order to extend the Messinger model to 3D applications, an algorithm for the water run-back distribution on the surface was implemented, in place of an air flow stagnation line search algorithm, which is straightforward in 2D applications, but more complicated in 3D. The developed algorithm aims to distribute the run-back water in directions determined by air pressure gradients or shear forces. The data structure chosen for MESS3D allows high flexibility since it can manage the necessary input solutions on surface grids coming from both structured and unstructured solvers, regardless the number of edges per surface cells.

There are many different numerical approaches to ice accretion simulation. Little comparison has been made between those approaches to identify the best tool for a given application. This paper presents a comparison exercise between 2D codes (CANICE-BA and LEWICE) and 3D codes (CANICE3D-BA, LEWICE3D and FENSAP-ICE). It also compares the 3D first generation code (panel method with Lagrangian droplet trajectory tracking) CANICE3D-BA to the 3D second generation code (Navier-Stokes with Eulerian droplet tracking) FENSAP-ICE. The paper includes a description of the different methodologies. The first comparison exercise is done using three 2D cases for which experimental ice shapes are available. The second exercise addresses a water collection efficiency over an isolated tail for which experimental data is available. Finally, an ice accretion comparison is presented in a DLR4 wing-body configuration.

The paper compares the size, weight and performance characteristics of hydraulic, pneumatic and electro-mechanical actuators for general aviation flight controls. Mathematical models for each type are presented. Actuator designs for specific control tasks in realistic light airplane applications are compared with each other. It is shown that electro-mechanical actuators utilizing the recently developed samarium-cobalt technology have significant advantages in terms of size and weight requirements while yielding very fast response.

Multiphase CFD simulations of air and water play a critical role in aircraft icing analysis. Specifically for air data sensors mounted near the front of an aircraft, simulations that predict the concentration of water surrounding an aircraft fuselage are necessary for understanding their performance in icing conditions. Those simulations can aid in sensor design and placement, and are central for defining critical conditions to test during icing qualification campaigns. There are several methods available in CFD that solve a multiphase flow field. Two of the most common methods used are Lagrangian and Eulerian. While these methods are similar, important differences can be viewed in the results, specifically in how the water shadow zones are predicted. This paper compares a Lagrangian and Eulerian CFD method for solving a multiphase flow field, and assesses their performance for use for analyzing installation locations and critical icing conditions of air data probes.

The objective of this investigation was to measure and document the existence of any significant differences in physical performance under operational conditions between the Launch Entry Suit (LES) and the new Advanced Crew Escape Suit (ACES). The LES is a partial pressure suit currently worn by astronauts during the launch and entry phases of Shuttle missions. The ACES is a full pressure suit under consideration as a replacement for the LES. One prototype ACES has been fabricated and was used in this investigation. This report presents the results of three tests conducted with six subjects to allow a comparative evaluation of the two suits. The three tests included a reach envelope test, a strength test, and a treadmill test. The reach envelope test measured and compared the maximum hand displacements during horizontal and vertical reaches of both left and right arms in one-g conditions.

During the certification of an airplane, the chances of encountering icing conditions as defined in the Federal Aviation Regulations (FAR) are so small that the satisfactory performance of an anti-icing system has to be established by methods other than flight tests in FAR icing conditions. The regulations, however, do not specify a set of standard procedures for evaluating the anti-icing capability of a system. The methods used within the industry, therefore, vary very widely in type, scope, and accuracy. This paper describes an approach used by Gates Learjet that is simple and inexpensive to be within the reach of any manufacturer, and accurate enough to contribute towards the creation of a standard procedure within the whole industry.

This work presents a comprehensive numerical model for ice accretion and Ice Protection System (IPS) simulation over a 2D component, such as an airfoil. The model is based on the Myers model for ice accretion and extended to include the possibility of a heated substratum. Six different icing conditions that can occur during in-flight ice accretion with an Electro-Thermal Ice Protection System (ETIPS) activated are identified. Each condition presents one or more layers with a different water phase. Depending on the heat fluxes, there could be only liquid water, ice, or a combination of both on the substratum. The possible layers are the ice layer on the substratum, the running liquid film over ice or substratum, and the static liquid film between ice and substratum caused by ice melting. The last layer, which is always present, is the substratum. The physical model that describes the evolution of these layers is based on the Stefan problem. For each layer, one heat equation is solved.

Due to ongoing efforts by the aviation industry, much has been learned over the last several years regarding jet engine power loss and compressor damage events caused by the ingestion of high concentrations of ice crystal particles into the core flow path. Boeing has created and maintained a database of such ice crystal icing (ICI) events to aid in analysis and further study of this phenomenon. This article provides a general update on statistics derived from the Boeing event database, and provides more details on specific event clusters of interest. A series of three flight campaigns have, over the past five years, collected in-situ data in deep convective clouds that will be used for the assessment of the new FAA CFR Part 33 ice crystal environmental envelope Appendix D, and the equivalent EASA CS-25 Appendix P.

Details of the design and development of an airborne data acquisition system for in-flight evaluation of airfoils are presented. The system was designed to be flown aboard a single engine general aviation aircraft and to measure and record airfoil surface pressures, airfoil wake pressures, and aircraft angle of attack and airspeed. Included are descriptions of the instrumentation, calibration and data reduction techniques, illustrations of the raw data and comments on the operational experience gained during the flight evaluation of the GA(W)-2 airfoil.

A unique, publicly available database regarding supercooled large droplet ice accretions has been developed in NASA Glenn's Icing Research Tunnel. Identical cloud and flight conditions were generated for five different airfoil models. The models chosen represent a variety of aircraft types from the horizontal stabilizer of a large transport aircraft to the wings of regional, business, and general aviation aircraft. In addition to the standard documentation methods of 2D ice shape tracing and imagery, ice mass measurements were also taken. This database will also be used to validate and verify the extension of the ice accretion code, LEWICE, into the SLD realm.