Search Results

Titanium alloys parts are ideally suited for advanced aerospace systems because of their unique combination of high specific strength and superior resistance to many corrosive environments, in addition to excellent composite compatibility. Despite these features, use of titanium alloys in engines and airframes is limited by cost. Therefore, the improvement of processing techniques for titanium alloys production became a trend of the modern metallurgic technology. This work presents results of the microstructural development of Ti-6Al-2Sn-4Zr-2Mo alloy produced by arc melting and powder metallurgy processes. This alloy has important applications in aerospace area, in sections exposed to high temperatures. Samples of this alloy were characterized by SEM (scanning electron microscopy), XRD (X-ray diffraction), Vickers microhardness measurements and density.

Gamma Ti-Al (γ Ti-Al) has excellent mechanical properties and oxidation/corrosion resistance at elevated temperatures (above 700°C), which makes it a possible replacement for traditional Ni based superalloy components in aircraft turbine engines and in orbital platform vehicles. The alloy design and efficient routes of TiAl processing are important technological challenges. In this work, samples of Ti-48Al-2Cr-2Nb (at.%) were produced by powder metallurgy processes. Using powder metallurgy, samples were prepared from elemental and pre-alloyed powders mixed for 2 h, followed by cold uniaxial and isostatic pressing and sintered between 1100°C up to 1400°C, for 1 h, under vacuum. After metallographic preparation, samples were characterized by SEM (Scanning Electron Microscopy), X-ray diffraction (XRD), density analyses and Vickers microhardness measurements.

Gamma-TiAl alloys are potential replacements for nickel alloys and conventional titanium alloys in hot sections of turbine engines, as well as in orbital platform vehicles. The combination of high specific stiffness and good oxidation resistance at intermediate temperatures can provide significant weight savings. However, they have a limited plasticity at room temperature and the tendency to brittle fracture. Powder metallurgy is a near net shape process that allows the parts production with complex geometry at low costs. An improved plasticity of the Ti-Al alloys is received by adding alloying elements and by microstructure modification. An alloy of two-phase structure Ti-48Al-2Cr-2Nb (at.%) was investigated using the blended elemental technique. Samples were produced by mixing of initial metallic powders followed by uniaxial and cold isostatic pressing with subsequent densification by sintering between 1100-1400°C, in vacuum.