Search Results

With emission regulations getting tighter and tighter, catalysts will need to be active at ever lower temperatures in order to meet future standards. To meet this need, automotive catalysts are being installed closer to the engine so as to be active immediately after start-up. In this location, catalysts must have high temperature durability. In this paper, we examined a heat-resistant support material, “hexa-aluminate”, for possible use in future automotive catalysts. Catalytic activity of hexa-aluminate was more better than La added γ - alumina after redox treatment in model gas and after engine aging. Since hexa-aluminate had the excellent thermal durability, and Pd, which are supported on it, maintains finer particles than those on La added γ-alumina. We suggest that hexa-aluminate is a effective support material for automotive catalysts. More specifically, hexa-aluminate is expected to be a key technology for meeting the stringent emission standards of the future.

Manganese (Mn), which is one of the common constituents of cast iron, should be present in larger and larger quantities in the near future due to the increased usage of high-tensile steel sheet in automotive industry foundries. When the quantity of Mn augments in cast iron, the production of high-ductile spheroidal graphite cast iron, for example for the production of steering knuckles and many other car parts, is compromised because of decreased elongation and greater hardness. The technology presented in this paper dramatically increased the elongation of spheroidal graphite cast iron with a high concentration of Mn. It is the fundamental technology to recycle press edge from high-tensile steel sheet as a raw material for cast iron. It is also a universal technology which can control metal structure in the casting process, and should contribute to the development of future cast iron materials.

March 2011, the Great East Japan Earthquake and subsequent Giant Tsunami caused insufficient nuclear reactor cooling at the Fukushima Daiichi Nuclear Power Station (1F), resulting in a catastrophe of hydrogen explosion. The development of long-term safe storage technology for high-dose radioactive fuel debris collected by the decommissioning of nuclear power plants is an urgent issue. Inside the storage canister, strong radiation from fuel debris decomposes water to generate hydrogen and oxygen. The research and development have been proceeding in order to secure safety by simply placing a catalyst in the canister for oxidizing hydrogen and returning it into water. The catalyst is called a Passive Autocatalytic Recombiner (PAR), and unlike catalysts for chemical plants, it is required to have robustness that can maintain its activity for more than 30 years in an environment where temperature, humidity, gas concentration, etc. cannot be controlled.

The catalyst of the crystalline ceramics known as a perovskite-type oxide was designed and controlled at the atomic level in order to create a new function for self-regeneration of precious metals in a usage ambience without auxiliary treatment. We have already reported that a catalyst with Pd supported on the perovskite-type oxide has higher activity than a catalyst with Pd supported on alumina. It was also found that Pd supported on the perovskite catalyst is finely dispersed [1, 2 and 3] The object of this study was to investigate the mechanism of self-regeneration by using hyper-analytical facilities. XAFS analysis, at SPring-8 (8 GeV), revealed that Pd is in six-fold coordinations with oxygen in a perovskite crystal, which indicating that Pd occupies the B site of the unit formula of ABO3 in the perovskite crystal structure under oxidation atmosphere.

The stoichiometric direct injection gasoline engines have higher torque performance than the port injection engines, as the volumetric efficiency can be increased due to the cooling effects of charging air by the fuel evaporation in the cylinder. They need only 3-way catalyst, leading to the cost down. However there exists the injection timing (region) that increased volumetric efficiency does not lead to higher torque. In order to investigate the phenomena, the in-cylinder mixture formation process has been analyzed by the LIF and the CFD techniques. As the results, it has been revealed that the phenomena are caused by the inhomogeneous mixture distribution before the ignition timing.

A new CVT system driven by a dry hybrid V-belt having a higher transmitting capacity has been investigated for small cars. This paper reports dynamic FEM analysis of the CVT, simulating transmitting efficiency and dynamic strain acting on the belt running at high speeds. We constructed 3-dimensional models for both belt and pulley assembly. It is demonstrated that pulley rigidity and clearance between pulley shaft and movable pulley significantly affect the power transmitting efficiency of the system. Dimensional change of the belt due to permanent deformation of the rubber material also affects the efficiency at high-speed range at the end of belt life. The dynamic strain obtained by the FEM simulated life of the belt in a bench test successfully.

In case of the turbocharged engine, it is difficult to control both the air mass flow and the EGR flow. Because the air mass flow and the Exhaust Gas Recirculation (EGR) flow are influenced by the boost pressure, it becomes necessary to manipulate the many inputs to control them. Therefore, to overcome this problem, we developed the new Multi Input Multi Output (MIMO) algorithm based on the adaptive sliding mode control (SMC) which eliminated the observer. And consequently, it is confirmed that this new algorithm makes it possible to track both the air mass flow and EGR flow to the desired value.

We have succeeded in applying a new injection molding method, die rotary injection (DRI), for plastic intake manifold production. Polyamide 6 and polyamide 66 are the optimum materials with consideration of the mechanical properties and the durability against heat and chemicals. Though the conventional plastic manifolds are mostly made by polyamide 66, polyamide 6 showed preferable characteristics for the injection welding technology that we have developed. Measurement of welding strength and observation of fracture surface were carried out by using specimens that were cut from the real products. High welding strength without delamination of the welding surface was confirmed in the molding condition up to high cylinder temperature and high injection rate.

It is necessary to mount a three-way catalyst at a place near the engine such as a close coupled converter or manifold converter to decrease cold-start emission. Naturally, in that case the catalyst of course is used under considerable A/F fluctuations at higher temperatures. We have developed a catalyst with excellent durability under such severe conditions. Three types of catalysts, made with different loading locations of precious metals, were evaluated using model gases. Durability was found to strongly depend on the loading location, and thus it should be possible to design an optimal catalyst for close coupled and manifold converters.

Increasingly stringent emissions controls have led to a greater emphasis on strategies designed to minimize emission during cold start. One strategy employed is that of close-coupling the catalyst to the exhaust manifold of the engine in an effort to minimize catalyst light-off time. In this configuration, the catalyst must exhibit a high degree of thermal stability. Further, since the catalyst is situated nearer to the engine, it is more liable to sense cylinder-to-cylinder variations in exhaust gas composition and thus needs to possess a wider operating window than a catalyst positioned further underbody. We have previously reported that Perovskite-Pd catalysts exhibit excellent heat resistance and have three-way catalyst activity comparable with or superior to that of Pt-Rh/ Al2O3 catalysts and Pd/Al2O3 catalysts [1]*. Durability at high temperatures and oxygen storage capacity under large air/fuel (A/F) ratio fluctuation conditions have now been tested.

It is significant for understanding the phenomena in a stratified charge engine and an SI engine with direct injection system to carry out the fundamental research. The experiments were conducted in a constant volume chamber with atmospheric condition. The pre-mixed charge composed of ethylene and air was charged with various equivalence ratio, the second charge with the same composition was injected into the chamber, thereafter, the combustion started by a spark plug. The phenomena were analyzed by use of the experimental results of shadowgraph, [OH] natural emission, pressure history and NOx and UHC in the exhaust gas.

Cerium oxide (Ceria) is known to have good oxygen storage capacity (OSC) and is used widely in three-way catalysts for automobiles, but it has a problem of heat stability since it is less stable than aluminium oxide (Alumina). In the present work, cerium-zirconiumyttrium (Ce-Zr-Y) oxide systems were investigated with the aim of improving the heat stability of CeO2-based oxide systems, which would result in great improvement in OSC. We found an optimum composition of Ce-Zr-Y oxide with platinum (Pt) dispersed in it at a quantity of 0.1 % in weight, which showed good OSC starting from 100°C upwards even after thermal aging at 1000°C for 2 hours under variable atmospheric conditions of rich-lean fluctuations.

The catalytic performance and On-Board Diagnostics (OBD) of the manifold catalyst having high Oxygen Storage Capacity (OSC) are described in this paper. First of all, we compared the performance of three-way catalysts containing Cerium - Zirconium - Yttrium oxide with Cerium - Zirconium oxide. Three-way catalysts dispersed Pt, Rh and Pd on Cerium - Zirconium - Yttrium oxide showed excellent catalytic performance especially at cold starting and at transient states, after high temperature aging at 1050°C. The performance of these catalysts was studied using the Driving Mode Simulation Dynamometer, which was developed in-house, and oxygen storage and release responses were compared in actual gas. Then we investigated the possibility of on-board diagnostics of catalyst deactivation with high OSC in manifold and close-coupled positions, a diagnostic which is usually assumed to be difficult to attain with present conventional technology.

In this paper, we studied the influence of support materials on Pd in three-way catalysts for the aim of enhancing the durability of Pd, particularly CO and NOx conversion efficiencies which are usually seriously damaged after aging. Since the durability of precious metals was found to be strongly influenced by the support material chosen, it should be possible to optimize catalyst performance by finding the appropriate support. The performance of Pd three-way catalysts with different support materials (Aluminum oxide, Cerium - Zirconium Oxide, Cerium - Zirconium -Yttrium Oxide, Zirconium Oxide, or Titanium Oxide) was compared after high temperature agings under various gas conditions. To assess Pd deterioration, the crystallite size of Pd was measured with XRD and the micro surface was observed by FE-SEM. The performance of the catalysts was evaluated.

Two working groups in the JSAE Committee of Fatigue–Reliability Section1 are currently researching the issue of fatigue life by both experimental and the CAE approach. Information regarding frequent critical problems on arc–welded structures were sought from auto–manufacturers, vehicle component suppliers, and material suppliers. The method for anti–fatigue design on arc–welded structures was established not only by a database created by physical test results in accordance with the collected information but also with design procedure taking Fracture–Mechanics into consideration. This method will be applied to vehicle development as one of the virtual laboratories in the digital prototype phase. In this paper, both the database from bench–test results on arc welded structures and FEA algorithm unique to JSAE are proposed some of the analysis results associated with the latter proposal are also reported.

Cerium oxide (CeO2) is known to have good oxygen storage capacity (OSC) and is used widely in three-way catalysts for automobiles, but it has a problem of inferior heat stability. In our previous work, cerium-zirconiumyttrium (Ce Zr-Y) oxide systems were investigated with the aim of improving the heat stability of CeO2-based oxide systems, and we found an optimum composition of Ce-Zr-Y oxide with platinum (Pt) showed good OSC even after high temperature aging. In this study OSC and thermal stability of Ce-Zr-Y oxide with varying the types of precious metals were investigated to evaluate the effect of precious metals. The results show that, Palladium (Pd) and Rhodium (Rh) are also available for Ce-Zr-Y oxide with precious metal system to improve OSC after thermal aging. In particular, Rh exhibited higher improvement than others at the composition of lower Ce content.

Three-way catalysts which remove different kinds of pollutants, such as CO, THC(total hydro-carbon) and NOx, simultaneously from the automotive exhaust gas employ Rhodium(Rh) in combination with Platinum(Pt) and Palladium(Pd). Rh is the most effective for reducing NOx to N2, but Rh is the most expensive of these precious metals. The ratio of Rh to Pt applied for automobiles frequently exceeds the natural production. The gap between supply and demand of Rh sometimes causes the big price fluctuation. Accordingly, many attempts to reduce the amount of Rh loaded or to develop non-Rh three-way catalysts have been made. Although Pd catalysts are considered to be promising candidates for non-Rh automotive three-way catalysts, some performance are still inferior to Pt-Rh catalysts. We have found that an excellent three-way catalytic activity appears by compounding new Perovskite-structured oxides with Pd and auxiliary oxides.

An engine control system turns complicatedly year by year to satisfy the requirements of the low pollution, low fuel consumption and high performance. Though assembly language has been used for programming of the Engine Control Unit(ECU) so far, we adopted the C language to improve the productivity of the software. Therefore it becomes possible to develop the high reliability program in a short period. This paper introduces about the overview of ECU which employs high speed 16- bit microcomputer programmed by the C language.

We have reported the innovation of “An Intelligent Catalyst” which has the function for self-regeneration of Pd realized through the solid solution and segregation of Pd in a perovskite crystal. In this study, we did further research on regeneration for three different precious metals (Rh, Pd and Pt) in two types of perovskite systems (LaCeFeO3 and LaCeCoO3). In perovskite catalysts loaded with precious metals, the durability of the perovskite structure in redox fluctuation at high temperature is indispensable to suppression of the grain growth of precious metals. The key technology for the development of intelligent catalysts is considered to be the affinity of precious metals to durable perovskite oxides. In the six kinds of perovskite catalysts investigated here, only the Pd loaded LaCeFeO3 catalyst was considered “intelligent”.

We have already reported that a LaFeCoPdO3 perovskite catalyst has the function for self-regeneration of Pd [1, 2, 3, 4, 5 and 6]. But cobalt was recognized as an environmental burden. In order to prepare for its practical application, we examined the composition of perovskite without cobalt. In this paper, we have investigated the catalytic activity, the structural durability and the regenerative ability of Co-free perovskites LaFePdO3, in comparison with LaFeCoPdO3 and Pd/Al2O3. As a result, the structural durability of LaFePdO3 is high, and the light-off performance is excellent even after aging. “Co-free Intelligent Catalyst” is regarded as the next technology for practical use especially as it is efficient in the reduction of emissions at cold starting.