Refine Your Search

Date

Date

Topic

Topic

Author

Author

Weather and climate Gas turbines Standard Thermodynamics Automotive

Search Results

Viewing 1 to 20 of 719
123Next >Last >>
Sort by title
Standard

A/C Compressor Oil Separator Effectiveness Test Standard
2019-07-15
CURRENT
J3112_201907
This SAE Standard establishes the test conditions and reporting method for quantifying refrigerant circuit oil circulation rate (OCR) reduction effectiveness of mobile air conditioning compressors using R-134a and R-1234yf refrigerants that include oil separators and/or other design features for the purpose of reducing the OCR in the refrigerant circuit. This standard and the OCR values it produces are not intended to make judgement on suitability of OCR values with regard to compressor durability.
Standard

A/C Compressor Oil Separator Effectiveness Test Standard
2017-03-07
HISTORICAL
J3112_201703
This SAE Standard establishes the test conditions and reporting method for quantifying refrigerant circuit oil circulation rate (OCR) reduction effectiveness of mobile air conditioning compressors using R-134a and R-1234yf refrigerants that include oil separators and/or other design features for the purpose of reducing the OCR in the refrigerant circuit.
Standard

ABRASION RESISTANCE TESTING—VEHICLE EXTERIOR GRAPHICS AND PIN STRIPING
1989-06-01
HISTORICAL
J1847_198906
This SAE Recommended Practice applies to the abrasion resistance testing of decorative tapes, graphics, and pin striping. It may also have relevance to certain vehicle labels and plastic wood grain film. The resistance to abrasive damage is judged qualitatively by its effect on the legibility, pattern, and color of the graphic marking. This recommended practice is intended as a guide toward standard practice but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering the use of this recommended practice.
Standard

ABRASIVE WEAR
1966-08-01
HISTORICAL
J965_196608
An enormous economic loss, as well as a waste of natural resources, is incurred world-wide as a result of wear of components and tools. Any effort expended in an attempt to reduce this loss is indeed worthwhile. The purpose of this SAE Information Report is to present the current state of knowledge of abrasive wear. This report, therefore, covers wear, or the undesired removal of metal by mechanical action, caused by abrasive particles in contact with the surface. It does not concern metal-to-metal wear or wear in the presence of an abrasive free lubricant. Abrasive wear occurs when hard particles, such as rocks, sand, or fragments of certain hard metals, slide or roll under pressure across a surface. This action tends to cut grooves across the metal surface, much like a cutting tool. Abrasive wear is of considerable importance in any part moving in relation to an abrasive.
Standard

ACCELERATED ENVIRONMENTAL TESTING FOR BONDED AUTOMOTIVE ASSEMBLIES
1992-08-01
HISTORICAL
J2100_199208
This SAE Recommended Practice defines conditions to which bonded assemblies can be exposed to simulate environmental aging. These recommendations are generally based on existing Original Equipment Manufacturer requirements at this time. (Environmental specifications used for this proposal were from General Motors, Ford, and Chrysler.) The substrate type, dimension, and number are described by the standard for materials being tested and should include control specimens which receive no environmental aging.
Standard

ACCELERATED EXPOSURE OF AUTOMOTIVE INTERIOR TIRM COMPONENTS USING A CONTROLLED IRRADIANCE WATER COOLED XENON-ARC APPARATUS
1992-03-01
HISTORICAL
J1885_199203
This test method specifies the operating procedures for a controlled irradiance, water cooled xenon-arc apparatus used for the accelerated exposure of various automotive interior trim components. Test durations, as well as any exceptions to the sample preparation and performance evaluation procedures contained in this document, are covered in material specifications of the different automotive manufacturers.
Standard

ACOUSTICAL AND THERMAL MATERIALS TEST PROCEDURE
1989-10-01
HISTORICAL
J1324_198910
This SAE Recommended Practice provides test methods for determining the characteristics of acoustical and thermal materials. Where applicable, methods of test developed by SAE and ASTM have been referenced.
Standard

ACOUSTICS — MEASUREMENT OF AIRBORNE NOISE EMITTED BY EARTHMOVING MACHINERY — METHOD FOR DETERMINING COMPLIANCE WITH LIMITS FOR EXTERIOR NOISE — STATIONARY TEST CONDITION
1991-06-01
J2102_199106
This SAE Standard describes a method for determining the exterior noise emitted by earthmoving machinery in terms of the A-weighted sound power level while the machine is in a stationary test condition. At six positions on a hemispherical surface, the equivalent continuous A-weighted sound pressure levels are measured. The A-weighted sound power level of the machinery is calculated from the measured values.
Standard

ACOUSTICS—MEASUREMENT OF AIRBORNE NOISE EMITTED BY CONSTRUCTION EQUIPMENT INTENDED FOR OUTDOOR USE—METHOD FOR DETERMINING COMPLIANCE WITH NOISE LIMITS
1991-06-01
J2101_199106
This SAE Standard describes a method for measuring the weighted sound pressure levels at prescribed microphone positions in the proximity of a device or machine for outdoor use, in order to determine compliance with noise limits. The A-weighted sound power level of the source is calculated from the measured values.
Standard

AGRICULTURAL TRACTOR TEST CODE (OECD) EQUIVALENT TO ORGANISATION FOR ECONOMIC CO-OPERATION AND DEVELOPMENT C(87)53
1993-04-01
HISTORICAL
J2708_199304
The purpose of this SAE Standard is to define test conditions, describe tests to be made, specify data to be obtained, show formulas and calculations, define terms, and establish a uniform method of reporting so that performance data obtained on various makes and models of tractors, tested in accordance with this document, will be comparable regardless of where the tests are made. Because of the availability of many tractor models and types that can be equipped with a variety of special or optional equipment, the scope of this document must be limited to obtaining and reporting only the most significant of widely used performance data. Tests performed to either the Standard Code as outlined in Section 5 or the Restricted Code as outlined in Section 6 will satisfy requirements of this Agricultural Tractor Test Code. This document is technically equivalent to the OECD Tractor Test Code C(87)53, Annex I and Annex II.
123Next >Last >>
X