Search Results

The increasing use and implementation of yaw and roll stability control in heavy trucks has contributed to an increased level of safety for truck drivers and other motorists. It has been shown that the combination of the stability control systems with a predictive model-based stability index can dramatically improve the truck stability and hence road safety. In this respect the authors introduced a new Total Safety Margin (TSM) using a fuzzy logic-based stability index. That methodology utilized a smoothed step and provided acceptable results; however, continuing development has shown that a right sigmoid membership function distribution would provide more complete coverage of the fuzzy space. Compared to the more common triangular membership function which is discontinuous when the membership grade equals one, sigmoid functions facilitate obtaining smooth, continuously differentiable surfaces of a fuzzy model.

A new control strategy for Anti-lock Braking System was developed to improve vehicle braking during emergency maneuvers. Various prediction and re-selection methods were evaluated using a nonlinear vehicle model along with a nonlinear tire model and a steering system model. To improve upon the evaluated control strategies, conjugate boundary method and poincare mapping concept were used. The new control strategy developed has proved to be more effective during emergency braking and steering maneuvers.

Various systems have been introduced recently in the automotive industry to improve the safety, ride and handling qualities of passenger vehicles, such as anti-lock braking system (ABS), active suspension system, four wheel steering system, traction control system, etc. Although each system has been shown to impose positive effects on the performance of a vehicle, the benefits of integrating various systems is yet to be determined. A feasibility study was conducted of a new non-linear control law for integration of anti-lock braking system and active suspension system. The control law is based on the use of a candidate Lyapunov function. Lyapunov stability theorem is applied to synthesize the control law and the adaptation law necessary to estimate the unknown parameters of the vehicle/road system. The proposed MIMO non-linear control strategy can maintain desired values of various variables while estimating the unknown parameters of the system.

In this paper a vehicle model including the steering, the tire and the suspension systems is presented. Assuming one out-of-balance wheel, the response of the system is obtained and the vibration characteristics of the steering system are analyzed. Based on the analysis conducted, two of the steering system parameters are selected and optimized. This is achieved by performing a sensitivity analysis with respect to various system parameters.

Studying the kinetic and kinematics of the rim-tire combination is very important in full vehicle simulations, as well as for the tire design process. Tire maneuvers are either quasi-static, such as steady-state rolling, or dynamic, such as traction and braking. The rolling of the tire over obstacles and potholes and, more generally, over uneven roads are other examples of tire dynamic maneuvers. In the latter case, tire dynamic models are used for durability assessment of the vehicle chassis, and should be studied using high fidelity simulation models. In this study, a three-dimensional finite element model (FEM) has been developed using the commercial software package ABAQUS. The purpose of this study is to investigate the tire dynamic behavior in multiple case studies in which the transient characteristics are highly involved.

A vehicle's response is predominately defined by the tire characteristics as they constitute the only contact between the vehicle and the road; and the surface friction condition is the primary attribute that determines these characteristics. The friction coefficient is not directly measurable through any sensor attachments in production-line vehicles. Therefore, current chassis control systems make use of various estimation methods to approximate a value. However a significant challenge is that these schemes require a certain level of perturbation (i.e. excitation by means of braking or traction) from the initial conditions to converge to the expected values; which might not be the case all the time during a regular drive.

Vehicle stability is maintained by proper interactions between the driver and vehicle stability control system. While driver describes the desired target path by commanding steering angle and acceleration/deceleration rates, vehicle stability controller tends to stabilize higher dynamics of the vehicle by correcting longitudinal, lateral, and roll accelerations. In this paper, a finite-horizon optimal solution to vehicle stability control is introduced in the presence of driver's dynamical decision making structure. The proposed concept is inspired by Nash strategy for exactly known systems with more than two players, in which driver, commanding steering wheel angle, and vehicle stability controller, applying compensated yaw moment through differential braking strategy, are defined as the dynamic players of the 2-player differential linear quadratic game.

Outdoor objective evaluations form an important part of both tire and vehicle design process since they validate the design parameters through actual tests and can provide insight into the functional performances associated with the vehicle. Even with the industry focused towards developing simulation models, their need cannot be completely eliminated as they form the basis for approving the performance predictions of any newly developed model. An objective test was conducted to measure the ABS performance as part of validation of a tire simulation design tool. A sample vehicle and a set of tires were used to perform the tests- on a road with known profile. These specific vehicle and tire sets were selected due to the availability of the vehicle parameters, tire parameters and the ABS control logic. A test matrix was generated based on the validation requirements.

This paper outlines the development of a simulation-based process for assessing the handling performance of a given set of tires on a specific vehicle. Based on force and moment data, a Pacejka tire model was developed for each of the five sets of tires used in this study. To begin with, simple handling metrics including under-steer gradient were calculated using cornering stiffness derived from the Pacejka model. This Pacejka tire model was subsequently combined with a 3DOF non-linear vehicle model to create a simulation model in MATLAB/Simulink®. Other handling metrics were calculated based on simulation results to step and sinusoidal (General Motors Company) steering inputs. Calculated performance metrics include yaw velocity overshoot, yaw velocity response time, lateral acceleration response time and steering sensitivity. In addition to this, the phase lag in lateral acceleration and yaw rate of the vehicle to a sinusoidal steering input were also calculated.

In this paper a yaw stability control algorithm along with an emergency roll control strategy have been developed. The yaw stability controller and emergency roll controller were both developed using linear two degree-of-freedom vehicle models. The yaw stability controller is based on Lyapunov stability criteria and uses vehicle lateral acceleration and yaw rate measurements to calculate the corrective yaw moment required to stabilize the vehicle yaw motion. The corrective yaw moment is then applied by means of a differential braking strategy in which one wheel is selected to be braked with appropriate brake torque applied. The emergency roll control strategy is based on a rollover coefficient related to vehicle static stability factor. The emergency roll control strategy utilizes vehicle lateral acceleration measurements to calculate the roll coefficient. If the roll coefficient exceeds some predetermined threshold value the emergency roll control strategy will deploy.