These specifications and methods of testing apply to cellular-rubber products known as latex foam rubbers but do not apply to sponge and expanded rubbers. The base material used in their manufacture may be natural rubber, reclaimed rubber, synthetic rubber, or rubberlike materials, alone or in combination. In case of conflict between the provisions of these general specifications and those of detailed specifications or methods of test for a particular product, the latter shall take precedence. Reference to methods for testing cellular-rubber products should specifically state the particular test or tests desired.
These specifications and methods of testing apply to cellular-rubber products known as latex foam rubbers but do not apply to sponge and expanded rubbers. The base material used in their manufacture may be natural rubber, reclaimed rubber, synthetic rubber, or rubberlike materials, alone or in combination. In case of conflict between the provisions of these general specifications and those of detailed specifications or methods of test for a particular product, the latter shall take precedence. Reference to methods for testing cellular-rubber products should specifically state the particular test or tests desired.
These specifications and methods of testing apply to cellular-rubber products known as latex foam rubbers but do not apply to sponge and expanded rubbers. The base material used in their manufacture may be natural rubber, reclaimed rubber, synthetic rubber, or rubberlike materials, alone or in combination. In case of conflict between the provisions of these general specifications and those of detailed specifications or methods of test for a particular product, the latter shall take precedence. Reference to methods for testing cellular-rubber products should specifically state the particular test or tests desired. The SAE Committee on Automotive Rubber Specifications has concluded, that in light of the fact that SAE J17 is a mirror image of ASTM D 1055, SAE J17 will be eliminated in the year 2005.
This SAE Recommended Practice provides a system for marking thermoset rubber parts to designate the general type of material from which the part was fabricated.
This specification covers flexible cellular rubber products known as sponge rubbers and expanded rubbers but does not apply to latex foam rubbers. The base material used in their manufacture may be natural rubber, reclaimed rubber, synthetic rubber or rubber-like materials, alone or in combination. Ebonite cellular rubbers are not included.
Except as otherwise specified in these methods, the following ASTM test methods and the various test methods in Table 3, applicable in general to vulcanized rubber, shall be complied with as required and are hereby made a part of these methods:
Except as otherwise specified in these methods, the following ASTM test methods and the various test methods in Table 3, applicable in general to vulcanized rubber, shall be complied with as required and are hereby made a part of these methods:
This SAE Standard specifies requirements for vulcanized rubbers in sheet form for use as standards in characterizing the effect of test liquids and service fluids. The appendices contain the standard reference elastomer formulas. The property changes of the SRE in contact with the indicated fluid under specified test conditions are the responsibility of the user. See 7.3 and Table 1. This standard is not designed to provide formulations of elastomeric product compositions for actual service.
This document provides a method/ procedure for specifying the properties of vulcanized elastomeric materials (natural rubber or synthetic rubbers, alone or in combination) that are intended for, but not limited to, use in rubber products for automotive applications. This document covers materials that do not contain any re-use; recycled; or regrind materials unless otherwise agreed to by manufacturer and end user. The use of such materials, including maximum % must be specified using a “Z” suffix. This classification system covers thermoset High Consistency Elastomers (HCE’s) only. Thermoplastic Elastomer (TPE) materials are classified using SAE J2558. Silicone Formed In Place Gasket (FIPG) systems such as Room Temperature Vulcanized (RTV) Silicones, and Liquid Silicone Rubber (LSR) systems are classified using ASTM F 2468.
This document provides a method/procedure for specifying the properties of vulcanized elastomeric materials (natural rubber or synthetic rubbers, alone or in combination) that are intended for, but not limited to, use in rubber products for automotive applications. This document covers materials that do not contain any re-use, recycled, or regrind materials unless otherwise agreed to by manufacturer and end user. The use of such materials, including maximum percent, must be specified using a “Z” suffix. This classification system covers thermoset High Consistency Elastomers (HCEs) only. Thermoplastic Elastomer (TPE) materials are classified using SAE J2558. Silicone Formed In Place Gasket (FIPG) systems such as Room Temperature Vulcanized (RTV) Silicones, and Liquid Silicone Rubber (LSR) systems are classified using ASTM F2468.