Search Results

A study to determine whether performance-based brake testing technologies can improve the safety of our highways and roadways through more effective or efficient inspections of brakes of on-the-road commercial vehicles is being sponsored by FHWA/DOT-OMC. A key objective of the study is to determine how the results from performance-based “inspections” compare with results obtained through traditional visual methods, such as those recommended by the Commercial Vehicle Safety Alliance (CVSA). Data from joint inspections (i.e., CVSA and performance-based inspections on the same vehicle), obtained over approximately a one year period, have been analyzed. Description of three of the performance-based technologies and preliminary results from approximately 1,400 joint inspections are covered in this paper.

A validated three-dimensional mathematical model was used to examine the extent of flammable plumes resulting from both large and small CNG leak scenarios inside a typical transit maintenance and storage facility ventilated at a rate of five air changes per hour. The leak rates used were based on an engineering and experimental analysis of actual CNG bus fuel system components. The results showed that both large and small CNG leaks produced flammable plumes, such plumes extended from a half a bus length to several bus lengths away from the leak source, and the plume from a large leak formed a layer along the ceiling before being dispersed by building ventilation.

Natural Gas engines are viewed as an alternative to diesel power in the quest to reduce heavy duty vehicle emissions in polluted urban areas. In particular, it is acknowledged that natural gas has the potential to reduce the inventory of particulate matter, and this has encouraged the use of natural gas engines in transit bus applications. Extensive data on natural gas and diesel bus emissions have been gathered using two Transportable Heavy Duty Vehicle Emissions Testing Laboratories, that employ chassis dynamometers to simulate bus inertia and road load. Most of the natural gas buses tested prior to 1997 were powered by Cummins L-10 engines, which were lean-burn and employed a mechanical mixer for fuel introduction. The Central Business District (CBD) cycle was used as the test schedule.