Search Results

There is a growing appreciation for using buses powered by alternative fuels in urban transport. Considered as such are city bus with engines fuelled with LNG and hybrid bus. This article, as shown above, provides a comparison of road exhaust emissions from three city buses: one with a CI engine fuelled with diesel fuel, and the other with a SI engine fuelled with LNG and Hybrid bus. Both vehicles (CI and LNG) conformed to Euro VI emission standard (hybrid bus EEV), and the tests were carried out in real traffic conditions. Equivocal opinions about differences in emissions from those types of buses, among others - CO2 and NOx emissions, were the underlying cause of the tests. The comparative study was carried out along the same urban routes during bus trips over the following days in similar traffic conditions. Exhaust road emission was determined based on the vehicle's curb weight and route length, and operating fuel consumption.

The benefits associated with the use of oxygen-containing diesel fuels in passenger cars are quite well described in the literature. This work describes the results of an 18-meter EEV city bus fueled with diesel fuel with the addition of 10% v/v of triethylene glycol dimethyl ether. This compound was chosen because it was effective in reducing exhaust emissions from light duty diesel vehicles. Emission tests (CO, HC, NOx and PM) of the city bus were performed over SORT (Standardized On-Road Tests) cycles using portable exhaust gas analyzers - PEMS. Significant differences in the emission of exhaust components were observed in individual SORT cycles. The level of road emissions reduced as the traffic smoothness increased, i.e. from the SORT 1 to SORT 3 cycle. The largest reduction in bus emissions associated with the use of the oxygenated additive (triethylene glycol dimethyl ether) applies to carbon monoxide and ranges from 50% for the SORT 3 cycle up to 90% for the SORT 1.