Search Results

A new prototype of a single unit till-planting system suitable for Egyptian soil was designed, constructed, and tested under soil bin and field conditions. Measurements were taken for draft, soil mean weight diameter, and seedling emergence. Results indicated that there are potential benefits of using this system rather to other tillage systems under dry and hard soil conditions. An optimum seedbed was created for rapid seedling emergence. Combinations of tillage, planting, and fertilizer application were performed in a single operation to reduce power and time requirements for crop production.

A flow divider valve is a device which allows a single stream of fluid to be split into two paths according to a predetermined ratio and independent of variations or differences in the load pressures. A flow combiner valve combines two paths of fluid into one stream such that the ratio of the flow rates coming into the valve remains independent of any variation or difference between the inlet pressures. This paper describes the design, operation and performance of an integrated flow divider/combiner valve. This design maintains the small flow dividing/combining error of high precision valves (less than 1.5% at rated flow) but incorporates the shuttle valve into the main spool system. This new design reduces the weight of the valve by 20% reducing the cost by approximately 10%. The new structure simplifies the construction of high precision valves and reduces a source of flow dividing/combining error (leakage).

This work is based on comparative study of oilseed flax fibre and glass fibre reinforced composite boards for potential application in automotive industries. The material characterizations of flax and glass fibre-composites using unsaturated polyester as matrix were evaluated. Vacuum infusion was used for fabrication of composites. Flexural, tensile, water absorption and color tests were conducted on the composite boards. The density and the moisture content of flax/glass fibre mats were also measured. Three types of composite boards, including flax, glass and flax-glass sandwich were developed and characterized.

Flax, which is known for its linens and oils that are used for industrial products, can also be utilized as a cost effective and environmentally acceptable approach to the creation of a partially biodegradable biocomposite. Biocomposite material is investigated by combining recycled tire rubber, flax and linear low density polyethylene (LLDPE). The manufacturing process which be used to fabricate the biocomposite product included Extrusion and Compression Molding. Optimizing and studying the composition percentages of the compounds were studied in this paper. Moreover, the properties of the product were observed by using tensile test, tearing test, water absorption test, hardness test and Differential Scanning Calorimetry.

This paper introduces two new types of basic components (an Electro-Hydraulic Tube and a Hydraulic Tube) which when connected in an appropriate manner can control flow and pressure for many applications; in addition, one of the devices is readily interfacable to a microprocessor for external control. Some background information about the basic concept and the operation of the two components is introduced. Some of the experimental characteristics will be illustrated and several basic circuit examples will be presented to show how the concept can be implemented. The Electro-Hydraulic Integrated Block (EHIB) and Circuit (EHIC) will be introduced followed by a discussion of the advantages and potential of the EHIC concept.

The performance of simple tool shapes in terms of draft with speed of operation was evaluated in the soil bin facility of the Department of Agricultural and Bioresource Engineering, University of Saskatchewan. A hydraulic driven monorail system was developed, which was capable of speeds up to 10 m/s. The results showed that the disturbed soil remained close to the cutting path, and the elliptical shape exhibited the lowest draft increment with speed.

Understanding the Relationships between plants and soil is important in the development of methods of crop production. Although physical properties of soil conducive to plant growth can be recognized by experienced observers, many of these properties have not been defined satisfactorily in mathematical or physical terms. A method of measuring penetration resistance and energy exerted by a mechanical seedling (a steel probe simulating a seedling) as it moved upward through the soil surface under different levels of surface compaction and soil moisture was examined. Mechanical seedlings with 2.06, 3.19 and 4.65 mm tip diameters were tested at soil moisture levels of 13, 17, and 20%. The penetration rate of the mechanical seedling while moving through the soil was held constant at 10 mm/min. Results showed that the emergence energy increased directly with soil surface compaction pressure, initial soil moisture content, and mechanical seedling diameters.

The potential exists for significantly reducing operating costs by minimizing missing and overlap in successive agricultural field operations, particularly in areas where the equipment is pull-behind and widths of over fifteen meters are common. This paper reports on the development of a sensor, consisting of a video camera and image processing system, to detect the location of the demarcation line between tilled-and-untilled soil and cut-and-standing crop. The development of hardware and software to achieve real-time operation under a variety of crop, soil and ambient lighting conditions is described.