Search Results

Engine mounts are an integral part of the vehicle that helps in reducing the vibrations generated from the engine. Engine mounts require a simple yet complicated amalgamation of two very different materials, steel and rubber. Proper adhesion between the two is required to prevent any part failure. Therefore, it becomes important that a comprehensive study is done to understand the mating phenomenon of both. A good linking between rubber and metal substrate is governed by surface pretreatment. Various methodologies such as mechanical and chemical are adopted for the same. This paper aims to present a comparative study as to which surface pretreatment has an edge over other techniques in terms of separation force required to break the bonding between the two parts. The study also presents a cost comparison between the techniques so that the best possible technique can be put to use in the commercial vehicle industry.

The existing head cover is having external oil and blow by separation unit, which is not only costlier but also complex and leads to increase in overall height of engine which was difficult to integrate in new variants of vehicles. A new head cover has been designed with internal baffle type oil and blow by separation system to ensure efficient separation and proper packaging of the system in new variants. The new system has been finalized after 26 DOE’s of different wire mesh sizes and different baffle plate size and positions. The final system has two bowl shaped separation unit with wire mesh, two cup type oil separation passages and one baffle plate for separating blow by. The system works on condensation and gravity method. The blow by is guided through a well-defined passage integrated in aluminum cylinder head cover itself. The passage angle is maintained to ensure minimum oil flow with blow by.

Diesel engines are facing stringent norms and future survival with its lower availability is one of the biggest concerns for OEMs of heavy duty commercial vehicles. This is leading to uplifting of new, latent and innovative techniques to achieve these norms with best possible BSFC to reduce overall diesel consumption. The prime objective of this study is to identify and explore the latent strength of pre and post injection on engine performance, emissions and oil dilution due to soot. The post injection strategy has the potential to reduce soot with almost same NOx and fuel consumption depending on the delay of post injection and its quantity. It aids to increase the engine out temperatures for assistance of after-treatment devices, thus meeting higher temperature requirements for NOx and PM conversion for stringent norms of BSVI.

The safety of the heavy duty commercial vehicle (HCV) occupants in an accident is an imperative task and should be considered during the design and development of cabins. The sufficient cabin survival space must be remained after the accident. The main aim of this study is to develop a Finite Element (FE) model of HCV cabin and validate to the test as per AIS029. The present study also includes the assessment of the energy absorption capabilities of the HCV cab during the pendulum impact test. Initially a detailed 3D FE model of a fully suspended HCV cabin was developed and then pendulum impact test simulation was carried out using LS-Dyna explicit solver. Simulation results were compared with the test results and were found in a great agreement in terms of survival space and overall deformation behavior. The load transfer path was described at the time of pendulum impact. The largest amount of impact energy was absorbed by the frontal region of the cabin.

The intensifying demand of cleaner fuelled vehicles considering current norms of BSIV and upcoming stringent norms of BSVI with low cost solutions has promoted the development of CNG and dual fuel vehicles. CNG vehicle is anticipated to discover its extensive use for environment fortification and effective deployment of energy capitals. Thus, CNG vehicles can be pretty effective in averting environment deterioration. CNG has low carbon to hydrogen ratio, this leads to very low CO2 emissions compared to gasoline and diesel vehicles. CNG engines have the potential of low NOx and particulate emissions. Natural gas vehicle development has been directed on the way to current use of direct injection and port injection with S.I. engines. Generally for low cost development, all OEMs prefer optimization of existing engines. Similarly for this project, a diesel engine was converted to S.I. engine for development of low emission CNG engine.

Virtual validation of automobile components poses a huge challenge and needs continuous process improvements. One of such challenge in FE modelling of welds and understanding its behavior with respect to physical behavior. With the ongoing development of BSVI line of products in commercial vehicle industry, the virtual validation needs to be accurate and close to the physical behavior of the components. The learning and challenges faced during the previous development is implemented in the current study for weld simulation and correlation activity. The brackets welded to the power train components is taken as a challenge in the present work. Initially weld model was depicted in the CAD and was analyzed in CAE by providing proper FE connection. This practice had lot of flaws, approximations due to perpendicularity and flatness concerns in the models leading to consuming a lot of time in model preparation.