Search Results

Standard

ACCESS SYSTEMS FOR OFF-ROAD MACHINES

1988-06-01

HISTORICAL

J185_198806

Minimum criteria are provided for steps, stairways, ladders, walkways, platforms, handrails, handholds, guardrails, and entrance openings which permit ingress to and egress from operator, inspection, maintenance or service platforms on off-road work machines parked in accordance with the manufacturer's instructions.

Standard

AGRICULTURAL EQUIPMENT ENCLOSURE PRESSURIZATION SYSTEM TEST PROCEDURE

1980-03-01

HISTORICAL

J1012_198003

This recommendation establishes a uniform test procedure for evaluating performance of agricultural equipment operator enclosure pressurization systems.

Standard

AIR BRAKE ACTUATOR DIAPHRAGM TEST PROCEDURE

1988-05-01

HISTORICAL

J1450_198805

This practice is intended for, but not limited to, testing of reinforced air brake diaphragms as they are used in vehicle service or parking brake systems.

Standard

AIR CLEANER TEST CODE

1987-06-01

HISTORICAL

J726_198706

The basic performance characteristics of greatest interest are airflow restriction or pressure drop, dust collection efficiency, dust capacity, and air cleaner structural integrity. This test code therefore addresses itself to the measurement of these parameters.

Standard

AIR CLEANER TEST CODE

1960-03-01

HISTORICAL

J726_196003

This test code is for laboratory use in determining the operating characteristics of air cleaners. It refers specifically to laboratory testing of oil bath, oil wetted, dry and multistage air cleaners. Other types should follow this recommended practice wherever applicable. Multistage types should be evaluated as a complete assembly although, if desired, a component stage can be tested separately in accordance with its individual type. This code contains alternate procedures and permits prescribing certain specific conditions of a lest. Therefore reported results of tests are not complete unless accompanied by statements, where applicable, of the specific conditions such as: (1) rated air flow, (2) prescribed air flow. (3) steady or variable airflow, (4) fine or coarse dust, (5) amount of (lust, and (6) maximum permissible restriction.

Standard

AIR CLEANER TEST CODE

1981-05-01

HISTORICAL

J726_198105

The basic performance characteristics of greatest interest are airflow restriction or pressure drop, dust collection efficiency, dust capacity, and air cleaner structural integrity. This test code therefore adresses itself to the measurement of these parameters.

Standard

AUTOMOTIVE PIPE FITTINGS

1993-06-01

HISTORICAL

J530_199306

This SAE Standard includes complete general and dimensional specifications for those types of pipe fittings commonly used in the automotive and other mass production industries where the use of lubricants or sealers is objectionable. The automotive pipe fittings shown in Figures 1 to 17 and Tables 1 to 6 are intended for general automotive and similar applications involving low or medium pressures or in conjunction with automotive tube fittings in piping systems.

Standard

AUTOMOTIVE PIPE FITTINGS

1992-06-01

HISTORICAL

J530_199206

This SAE Standard includes complete general and dimensional specifications for those types of pipe fittings commonly used in the automotive and other mass production industries where the use of lubricants or sealers is objectionable. The automotive pipe fittings shown in Figures 1 to 17 and Tables 1 to 6 are intended for general automotive and similar applications involving low or medium pressures or in conjunction with automotive tube fittings in piping systems.

Standard

AUTOMOTIVE PIPE FITTINGS

1981-01-01

HISTORICAL

J530_198101

This standard includes complete general and dimensional specifications for those types of pipe fittings commonly used in the automotive and other mass production industries where the use of lubricants or sealers is objectionable. The automotive pipe fittings shown in Figs. 1-17 and Tables 2-7 are intended for general automotive and similar applications involving low or medium pressures or in conjunction with automotive tube fittings in piping systems.

Standard

AUTOMOTIVE PIPE FITTINGS

1994-05-01

HISTORICAL

J530_199405

This SAE Standard includes complete general and dimensional specifications for those types of pipe fittings commonly used in the automotive and other mass production industries where the use of lubricants or sealers is objectionable. The automotive pipe fittings shown in Figures 1 to 17 and Tables 1 to 6 are intended for general automotive and similar applications involving low or medium pressures or in conjunction with automotive tube fittings in piping systems.

Standard

AUTOMOTIVE PIPE, FILLER, AND DRAIN PLUGS

1992-02-01

HISTORICAL

J531_199202

This SAE Standard includes complete general and dimensional specifications for those types of pipe, filler, and drain plugs (shown in Figures 1 to 6 and Tables 1 to 4) commonly used in automotive and related industrial applications.

Standard

AUTOMOTIVE PIPE, FILLER, AND DRAIN PLUGS

1981-01-01

HISTORICAL

J531_198101

This standard includes complete general and dimensional specifications for those types of pipe, filler, and drain plugs (shown in Figs. 1-6 and Tables 2-4) commonly used in automotive and related industrial applications.

Standard

AUTOMOTIVE PIPE, FILLER, AND DRAIN PLUGS

1994-06-01

HISTORICAL

J531_199406

This SAE Standard includes complete general and dimensional specifications for those types of pipe, filler, and drain plugs (shown in Figures 1 to 6 and Tables 1 to 4) commonly used in automotive and related industrial applications.

Standard

AXLE EFFICIENCY TEST PROCEDURE

1979-06-01

HISTORICAL

J1266_197906

Data from this procedure permits mapping axle efficiency and/or waste energy over the operating range of passenger cars, trucks, busses, and other highway vehicles to which axles are applied.

Standard

Access Systems for Off-Road Machines

2003-05-30

HISTORICAL

J185_200305

Minimum criteria are provided for steps, stairways, ladders, walkways, platforms, handrails, handholds, guardrails, and entrance openings which permit ingress to and egress from operator, inspection, maintenance or service platforms on off-road work machines parked in accordance with the manufacturer's instructions.

Standard

Aftermarket Composite Wheels Made of Matrix Material and Fiber Reinforcement Intended for Normal Highway Use - Test Procedures and Performance Requirements

2020-09-09

CURRENT

J3204_202009

This SAE Recommended Practice provides minimum performance requirements and uniform procedures for fatigue and impact testing, electrical resistance, and maximum operating temperature (MOT) of wheels intended for normal highway use on passenger cars, light trucks, and multipurpose vehicles.

Standard

Agricultural Tractor Test Code

2003-05-15

CURRENT

J708_200305

The purpose of this SAE Standard is to define test conditions, give a description of the tests to be made, specify data to be obtained, show formulas and calculations, define terms, and establish a uniform method of reporting so that performance data obtained on various makes and models of tractors, tested in accordance with this document, will be comparable regardless of where the test is made. It is obvious, because of the many present day tractor models available in a number of types with numerous items of special or optional equipment, that the scope of this document must be limited to obtaining and reporting only the most significant of widely used performance data.

Standard

Agricultural and Forestry Off-Road Machinery Control and Communication Network

2019-01-14

CURRENT

J1939/2_201901

SAE J1939-2 specifies the requirements for application of SAE J1939 in agricultural and forestry equipment. This document specifies the series of documents within the set of SAE J1939 documents that are applicable to agricultural and forestry equipment and provides further requirements for this industry. The SAE and ISO groups have cooperated to define agricultural and forestry networks in a manner to allow compatibility of ECUs and messaging protocols between the A&F and the T&B networks.

Standard

Agricultural and Forestry Off-Road Machinery Control and Communication Network

2013-03-11

HISTORICAL

J1939/2_201303

SAE J1939-02 Agricultural and Forestry Off-Road Machinery Network specifies the requirements for application of SAE J1939 in agricultural and forestry equipment. This document specifies the series of documents within the set of SAE J1939 documents that are applicable to agricultural and forestry equipment and provides further requirements for this industry. The SAE and ISO groups have cooperated to define agricultural and forestry networks in a manner to allow compatibility of ECUs and messaging protocols between the A&F and the T&B networks.

Standard

Air Brake Actuator Diaphragm Test Procedure

2001-10-26

HISTORICAL

J1450_200110

This SAE Recommended Practice is intended for, but not limited to, testing of reinforced air brake diaphragms as they are used in vehicle service or parking brake systems.