Search Results

Standard

ACCESS SYSTEMS FOR CONSTRUCTION AND INDUSTRIAL EQUIPMENT

1970-07-01

HISTORICAL

J185_197007

This recommended practice covers the criteria for steps, ladders, walkways, platforms, grab rails (handrails), grab irons, guardrails, and entrance openings as they relate to aiding the operator and/or servicemen in performing their functions on the vehicle.

Standard

AGRICULTURAL TRACTOR TEST CODE

1972-06-01

HISTORICAL

J708C_197206

Standard

AGRICULTURAL TRACTOR TEST CODE

1980-06-01

HISTORICAL

J708_198006

Standard

AGRICULTURAL TRACTOR TEST CODE

1983-07-01

HISTORICAL

J708_198307

Standard

AGRICULTURAL TRACTOR TEST CODE (OECD) Equivalent to Organisation for Economic Co-Operation and Development C(87)53

1988-09-01

HISTORICAL

J2708_198809

Standard

ALARM - BACKUP - ELECTRIC - PERFORMANCE, TEST, AND APPLICATION

1985-03-01

HISTORICAL

J994_198503

This SAE Recommended Practice establishes the following criteria for electrically operated backup alarm devices on mobile construction and industrial machinery: a Backup alarm device performance requirements. b Measurement technique for alarm performance requirements. c Laboratory environmental tests. d Alarm activation on the vehicle.

Standard

AUTOMOTIVE PIPE FITTINGS

1992-06-01

HISTORICAL

J530_199206

This SAE Standard includes complete general and dimensional specifications for those types of pipe fittings commonly used in the automotive and other mass production industries where the use of lubricants or sealers is objectionable. The automotive pipe fittings shown in Figures 1 to 17 and Tables 1 to 6 are intended for general automotive and similar applications involving low or medium pressures or in conjunction with automotive tube fittings in piping systems.

Standard

AUTOMOTIVE PIPE FITTINGS

1981-01-01

HISTORICAL

J530_198101

This standard includes complete general and dimensional specifications for those types of pipe fittings commonly used in the automotive and other mass production industries where the use of lubricants or sealers is objectionable. The automotive pipe fittings shown in Figs. 1-17 and Tables 2-7 are intended for general automotive and similar applications involving low or medium pressures or in conjunction with automotive tube fittings in piping systems.

Standard

AUTOMOTIVE PIPE, FILLER, AND DRAIN PLUGS

1992-02-01

HISTORICAL

J531_199202

This SAE Standard includes complete general and dimensional specifications for those types of pipe, filler, and drain plugs (shown in Figures 1 to 6 and Tables 1 to 4) commonly used in automotive and related industrial applications.

Standard

AUTOMOTIVE PIPE, FILLER, AND DRAIN PLUGS

1981-01-01

HISTORICAL

J531_198101

This standard includes complete general and dimensional specifications for those types of pipe, filler, and drain plugs (shown in Figs. 1-6 and Tables 2-4) commonly used in automotive and related industrial applications.

Standard

AUTOMOTIVE PIPE, FILLER, AND DRAIN PLUGS

1994-06-01

HISTORICAL

J531_199406

This SAE Standard includes complete general and dimensional specifications for those types of pipe, filler, and drain plugs (shown in Figures 1 to 6 and Tables 1 to 4) commonly used in automotive and related industrial applications.

Standard

Agricultural Tractor Test Code

1999-09-01

HISTORICAL

J708_199902

The purpose of this SAE Standard is to define test conditions, give a description of the tests to be made, specify data to be obtained, show formulas and calculations, define terms, and establish a uniform method of reporting so that performance data obtained on various makes and models of tractors, tested in accordance with this document, will be comparable regardless of where the test is made. It is obvious, because of the many present day tractor models available in a number of types with numerous items of special or optional equipment, that the scope of this document must be limited to obtaining and reporting only the most significant of widely used performance data.

Standard

Air Brake Valve - Performance Requirements

2020-12-18

CURRENT

J1410_202012

This SAE Recommended Practice establishes minimum performance requirements for new pneumatic valves when tested in accordance with the test procedure outlined in SAE J1409. The performance requirements will include: a Input-output performance b Leakage characteristics c Low temperature performance d Elevated temperature performance e Corrosion resistance performance f Endurance testing g Structural integrity

Standard

Air Brake Valve - Performance Requirements

2016-07-20

HISTORICAL

J1410_201607

This SAE Recommended Practice establishes minimum performance requirements for new pneumatic valves when tested in accordance with the test procedure outlined in SAE J1409. The performance requirements will include: a Input-output performance b Leakage characteristics c Low temperature performance d Elevated temperature performance e Corrosion resistance performance f Endurance testing g Structural integrity

Standard

Air Brake Valve Input-Output Characteristic Requirements

2016-06-17

CURRENT

J1861_201606

This SAE Recommended Practice establishes minimum tolerance requirements for pilot operated and mechanically actuated modulating type valves, and through type valves used in the service brake control system when tested in accordance with the test procedure outlined in SAE J1859. This document applies to the nominal input-output characteristics as specified by vehicle original equipment manufacturer and labeled by the valve manufacturer as outlined in SAE J1860. The tolerance requirements will include: a Crack (opening) pressure or force. Crack pressure may be measured at the initial output pressure or as the pressure differential before output pressure exceeds 14 kPa (2 psi). Crack force may be measured at initial output pressure or before output pressure exceeds 14 kPa (2 psi). b Pressure differential (input-output)

Standard

Air Brake Valve Input-Output Characteristic Requirements

2011-09-12

HISTORICAL

J1861_201109

This SAE Recommended Practice establishes minimum tolerance requirements for pilot operated and mechanically actuated modulating type valves, and through type valves used in the service brake control system when tested in accordance with the test procedure outlined in SAE J1859. This document applies to the nominal input-output characteristics as specified by vehicle original equipment manufacturer and labeled by the valve manufacturer as outlined in SAE J1860. The tolerance requirements will include: a Crack (opening) pressure or force. Crack pressure may be measured at the initial output pressure or as the pressure differential before output pressure exceeds 14 kPa (2 psi). Crack force may be measured at initial output pressure or before output pressure exceeds 14 kPa (2 psi). b Pressure differential (input-output)

Standard

Alarm - Backup - Electric Laboratory Performance Testing

2023-06-27

CURRENT

J994_202306

The scope of this SAE Standard is the definition of the functional, environmental, and life cycle test requirements for electrically operated backup alarm devices primarily intended for use on off-road, self-propelled work machines as defined by SAE J1116 (limited to categories of (1) construction, and (2) general purpose industrial).

Standard

Alarm—Backup—Electric Laboratory Performance Testing

2003-10-30

HISTORICAL

J994_200310

The scope of this SAE Standard is the definition of the functional, environmental, and life cycle test requirements for electrically operated backup alarm devices primarily intended for use on off-road, self-propelled work machines as defined by SAE J1116 (limited to categories of 1) construction, and 2) general purpose industrial).

Standard

Average Vehicle Dimensions for Use in Designing Docking Facilities for Motor Vehicles

2011-06-13

CURRENT

J699_201106

This SAE Recommended Practice establishes limits for empty vehicle floor heights and provides limits of vehicle dimensions for use in designing docking facilities for motor vehicles.

Standard

BYSTANDER SOUND LEVEL MEASUREMENT PROCEDURE FOR SMALL ENGINE POWERED EQUIPMENT

1985-03-01

HISTORICAL

J1175_198503

This SAE Recommended Practice establishes the instrumentation and procedure to be used in measuring the bystander sound level of engine powered equipment under 15 kW (20 bhp) typical of their normal operation. It is intended to include equipment such as lawn mowers, snow blowers, and tillers. It is not intended to include equipment designed primarily for operation on highways or within factories and buildings, or vehicles such as motorcycles, snowmobiles, and pleasure motorboats that are covered by other SAE Standards or Recommended Practices. This procedure does not cover chain saws. This SAE Recommended Practice may also be used when measuring the bystander sound level on similar equipment powered by electricity or other power sources.