Search Results

This standard applies to Open Bowl Scrapers, as defined in SAE J728 and J1057. It is similar to ISO/DIS 6485.

This standard is applicable to off-road work machines - base machine and its equipment included in categories 1.1, 1.2, 2, 4, and 5 of SAE J1116.

This SAE Standard establishes a test method to measure drag force of self-propelled, as well as towed, construction, forestry, and industrial machines, with or without payload, as listed in SAE J/ISO 6165 and J1116. Drag force is measured as a function of travel speed.

This SAE Standard establishes a test method to measure drag force of self-propelled, as well as towed, construction, forestry, and industrial machines, with or without payload, as listed in SAE J/ISO 6165 and J1116. Drag force is measured as a function of travel speed.

This standard applies to hydraulically operated backhoes (as defined in SAE J1116) This standard describes a uniform "over end" and "full swing arc" lifting capacity rating for backhoes. It is based on the actual capacity of the machine to lift and support a load under stable conditions. Rated lift capacities will be specified for both the boom and the dipperstick and will be shown on a lift capacity chart Figure 1.

This is applicable to pipelayers and side booms, mounted on tractors or loaders defined in SAE J1057.

This SAE Standard provides a uniform method to calculate the lift capacity of scrap and material handlers, establishes definitions and specifies machine conditions for the calculations. This document applies to scrap and material handlers as defined in SAE J2506 that have a 360 degrees continuous rotating upper structure. It does not apply to equipment that is incapable of lifting a load completely off the ground. This document applies to those machines that are crawler, wheel, rail and pedestal or stationary mounted.

This SAE Standard provides names of major components peculiar to rollers and compactors. Illustrations of components are not intended to be exactly descriptive of any particular machine. See Figures 1 to 3.)

This standard applies to hydraulic backhoes which have no more than 190 degrees of rotational swing and are mounted on wheeled tractors and crawler tractors.

This standard applies to hydraulic backhoes which have no more than 190 degrees of rotational swing and are mounted on wheeled tractors and crawler tractors.

This SAE Standard describes a uniform method to calculate and specify travel performance characteristics of hydraulic excavators, material handlers, knuckle boom log loaders, delimbers, feller bunchers, harvesters, processors, and other knuckle boom material handlers. It establishes definitions and specifies machine conditions for calculations and tests. This document applies to crawler mounted machines such as hydraulic excavators as defined in SAE J/ISO 6165 and ISO 7135, and knuckle boom log loaders as defined in SAE J1209 and SAE J2055. This document also applies to certain forestry equipment defined in SAE J1209 and ISO 6814 that have crawler mountings such as delimbers, feller bunchers, harvesters, and processors. Included in the definition of hydraulic excavators are also front shovel, clamshell, and telescoping boom excavators.