Search Results

Original equipment manufacturers and their customers are demanding more efficient, lighter, smaller, safer, and smarter systems across the entire product line. In the realm of automotive, agricultural, construction, and earth-moving equipment industries, an additional highly desired feature that has been steadily trending is the capability to offer remote and autonomous operation. With the previous requirements in mind, the authors have proposed and validated a new electrohydraulic steering technology that offers energy efficiency improvement, increased productivity, enhanced safety, and adaptability to operating conditions. In this paper, the authors investigate the new steering technology's capacity to support remote operation and demonstrate it on a compact wheel loader, which can be remotely controlled without an operator present behind the steering wheel. This result establishes the new steer-by-wire technology's capability to enable full autonomous operation as well.

Over the last decade, a number of hybrid architectures have been proposed with the main goal of minimizing energy consumption of off-highway vehicles. One of the architecture subsets which has progressively gained attention is hydraulic hybrids for earth-moving equipment. Among these architectures, hydraulic hybrids with secondary-controlled drives have proven to be a reliable, implementable, and highly efficient alternative with the potential for up to 50% engine downsizing when applied to excavator truck-loading cycles. Multi-input multi-output (MIMO) robust linear control strategies have been developed by the authors' group with notable improvements on the control of the state of charge of the high pressure accumulator. Nonetheless, the challenge remains to improve the actuator position and velocity tracking.

Mobile Earth Moving Machinery like Skid-steer loaders have tight turning radius in limited spaces due to a short wheelbase which prevents the use of suspensions in these vehicles. The absence of a suspension system exposes the vehicle to ground vibrations of high magnitude and low frequency. Vibrations reduce operator comfort, productivity and life of components. Along with vibrations, the machine productivity is also hampered by material spillage which is caused by the tilting of the bucket due to the extension of the boom. The first part of the paper focuses on vibration damping. The chassis’ vibrations are reduced by the use of an active suspension element which is the hydraulic boom cylinder which is equivalent to a spring-damper. With this objective, a linear model for the skid steer loader is developed and a state feedback control law is implemented.

The paper presents a new computer based design method for valve plate design using the simulation program CASPAR and the extension tool AVAS. CASPAR is based on a non-isothermal gap flow model considering time dependent gap heights and surface deformations due to high pressure loads for all connected gaps of swash plate axial piston machines. Among others the program allows the prediction of oscillating forces exerted on machine parts and the calculation of effective flow pulsation on both ports as a function of design and operating parameters. Together with the calculated instantaneous cylinder pressure the flow pulsation and oscillating forces can be taken as criterion to evaluate the effectiveness of design measures for noise reduction during the design phase, i.e. before prototype production. The models used in the program have been verified by different measurements on pumps and motors.

A new control concept was developed to minimize the power losses of a hydrostatic drive line for off-road vehicles. The drive line control concept is based on two separate closed loop controls, one for the hydrostatic transmission and another for the combustion engine. The command values for both control loops are calculated under consideration of the characteristic curves of the combustion engine and the losses within the hydrostatic transmission, using an on-line optimization procedure. This paper discusses the benefits of this control concept based on a comparison of typical realistic driving manoeuvres. Objective of the investigations for different output powers is the potential of fuel savings under different operating conditions. A hardware-in-the-loop test rig for the investigated hydrostatic propel drive is used for the experimental validation.

This paper compares two different rule-based power management (PM) strategies, in terms of their resultant fuel consumptions, through a simulation study as applied to a hybrid hydraulic multi-actuator displacement controlled (DC) system. Specifically, the system analyzed is a mini-excavator, wherein the digging functions are powered using four variable displacement pump/motors - these units are also shared by the auxiliary functions. In addition, the on-board hydraulic energy storage device, or accumulator, is charged or discharged using an additional pump/motor, called the storage unit. A parallel architecture is used for the hybrid system wherein the additional pump/motor is on the engine shaft, running at the same speed as the engine (and the other four pumps). An aggressive and fast, digging cycle was used to size the storage unit and accumulator, as well as to compare the performance of the two different strategies.

Noise generation in axial piston machines can be attributed to two main sources; fluid borne and structure borne. Any attempt towards noise reduction in axial piston machines should focus on simultaneous reduction of these two sources. A multi-parameter multi-objective optimization approach to design valve plates to reduce both sources of noise for pumps which operate in a wide range of operating conditions has been detailed in a previous work (Seeniraj and Ivantysynova, 2008). The focus of this paper is to explain the background and to demonstrate the functionality and usefulness of the methodology for pump design.

Modern on-road vehicles have been making steady strides when it comes to employing technological advances featuring active safety systems. However, off-highway machines are lagging in this area and are in dire need for modernization. One chassis system that has been receiving much attention in the automotive field is the steering system, where several electric and electrohydraulic steering architectures have been implemented and steer-by-wire technologies are under current research and development activities. On the other hand, off-highway articulated steering vehicles have not adequately evolved to meet the needs of Original Equipment Manufacturers (OEM) as well as their end customers. Present-day hydrostatic steering systems are plagued with poor energy efficiency due to valve throttling losses and are considered passive systems relative to safety, adjustability, and comfort.