Refine Your Search

Date

Date

Topic

Topic

Metals Maintenance and Aftermarket Steel Scale models Commercial Vehicle Fuel systems MTC1, Earthmoving Machinery Fluid power systems Design Engineering and Styling Alloys

Search Results

Viewing 1 to 20 of 31
12Next >Last >>
Sort by title
Standard

Cutting Edge—Curved Grader
2006-02-05
HISTORICAL
J739_200602
This SAE Standard is intended for curved cutting edge sections used on graders as defined in SAE J870 and J1057. (See Figure 1 and Table 1.) Hole conformation is further defined in SAE J740 and J1580.
Standard

DRAWBARS - CRAWLER TRACTOR
1983-12-01
HISTORICAL
J749_198312
This recommended practice includes only those dimensions which will affect the attaching of towed equipment.
Standard

Drawbars--Crawler Tractor
2002-02-21
CURRENT
J749_200202
This SAE Standard provides recommended dimensions for drawbars for crawler tractors as defined in SAE J1057 (SEP88). It includes only those dimensions which will affect the attaching of towed equipment.
Standard

Excavator and Backhoe Hand Signals
2002-08-29
HISTORICAL
J1307_200208
This SAE Recommended Practice applies to mobile excavators, as defined in SAE J/ISO 6165, Earthmoving Machinery—Basic Types—Vocabulary, and backhoes as defined in SAE J326, Nomenclature Hydraulic Backhoes.
Standard

Excavator, Mini-excavator, and Backhoe Hoe Bucket Volumetric Rating
1999-01-30
CURRENT
J296_199901
This SAE Standard provides a uniform method for determining rated and struck capacity for buckets used on excavators, mini-excavators, and backhoes as defined in SAE J1057 and equipped with hoe attachment. Calculations are based on the inside physical dimensions of the bucket only, without use of optional side cutters, spill guards, teeth, or other accessories and without regard to bucket action provided by any specific machine. This document does not cover shovel, clam, or dragline buckets described in SAE J67 or loaders buckets described in SAE J742.
Standard

HOLE SPACING FOR SCRAPER AND DOZER CUTTING EDGES
1983-05-01
HISTORICAL
J737_198305
This standard is intended for cutting edge sections used on: (1) Tractor-scrapers as described in SAE J1057 and J728. (2) Dozers as described in SAE J173. These cutting edges are further defined in SAE J738 for cross section and SAE J740 for hole conformation.
Standard

Hole Placement on Dozer End Bits
1998-05-01
CURRENT
J63_199806
The recommended practice applies to straight blade, angling blade, U blade, and semi-U blades used on earthmoving tractors per SAE J1057a up to a maximum weight of 100,000 lb (45,000 kg).
Standard

Hole Spacing for Scraper and Dozer Cutting Edges
2007-08-30
CURRENT
J737_200708
This standard is intended for cutting edge sections used on: a. Tractor-scrapers as described in SAE J1057 and J728 b. Dozers as described in SAE J729. These cutting edges are further defined in SAE J738 for cross section and SAE J740 and J1580 for hole conformation. (Note: Some inch dimentions in this standard are not equivalent to the corresponding millimeter figures because values which are widely used have been adapted. This standard specifies hole placement along with length and width of the cutting edge.
Standard

Hydraulic Backhoe Lift Capacity
2012-05-11
CURRENT
J31_201205
This standard applies to hydraulically operated backhoes (as defined in SAE J1116) This standard describes a uniform "over end" and "full swing arc" lifting capacity rating for backhoes. It is based on the actual capacity of the machine to lift and support a load under stable conditions. Rated lift capacities will be specified for both the boom and the dipperstick and will be shown on a lift capacity chart Figure 1.
Standard

Hydraulic Excavator Lift Capacity Calculation and Test Procedure
2008-04-14
CURRENT
J1097_200804
This standard provides a uniform method to calculate and a test procedure to validate hydraulic excavator lift capacity. It establishes definitions and specifies machine conditions for calculations in Section 1 and identifies the validating test procedure in Section 2.
Standard

Hydraulic Excavator Operator Controls
2019-06-06
CURRENT
J1177_201906
This standard covers mobile hydraulic excavator controls and the specific arrangement and direction of motion for the primary controls. This standard applies to mobile hydraulic excavators as described in ISO 7135—Earthmoving machinery—Hydraulic excavators—Terminology and commercial specifications, and ISO 6165—Earthmoving machinery—Basic types—Vocabulary.
Standard

LIFT CAPACITY CALCULATION AND TEST PROCEDURE PIPELAYER AND SIDEBOOM
1992-03-01
HISTORICAL
J743_199203
This SAE Standard describes a method to calculate and a test procedure to validate rated lift capacity as presented in commercial literature for pipelayers and tractors or loaders (wheel or crawler), equipped with a hydraulic or mechanically operated sideboom. Rated lift capacity considers hoist mechanism limits, tipping loads, and rope factor. After the lift capacity is validated by testing, a reduction factor is applied to establish the rated lift capacity for the specific pipelayer or sideboom configuration.
Standard

Lift Capacity Calculation Method Scrap and Material Handlers
2019-04-15
CURRENT
J2518_201904
This SAE Standard provides a uniform method to calculate the lift capacity of scrap and material handlers, establishes definitions and specifies machine conditions for the calculations. This document applies to scrap and material handlers as defined in SAE J2506 that have a 360 degrees continuous rotating upper structure. It does not apply to equipment that is incapable of lifting a load completely off the ground. This document applies to those machines that are crawler, wheel, rail and pedestal or stationary mounted.
12Next >Last >>
X