Refine Your Search

Date

Date

Topic

Topic

Bodies and Structures Titanium Motor Vehicle Council Test procedures Defense industry Steel Fatigue

Search Results

Viewing 1 to 20 of 53
123Next >Last >>
Sort by title
Standard

Alternator Remanufacturing/Rebuilding Procedures Includes Passenger Car, Heavy Duty, Industrial, Agricultural, and Marine
2008-05-13
CURRENT
J2075_200805
These remanufacturing procedures are recommended minimum guidelines (with theunderstanding that being more critical is acceptable) for use by remanufacturers/rebuilders of alternators to promote consistent reliability, durability, and safety of remanufactured alternators. Installation of remanufactured or rebuilt products is often an economical way to repair an application even though the products may not be identical to original equipment parts. Before processing any part, a remanufacturer/rebuilder should determine if the original design and present condition of the core are suitable for remanufacturing/rebuilding so as to provide durable operation of the part as well as acceptable performance when installed on the application. The remanufacturer/rebuilder should also consider the safety aspects of the product and any recommendations of the original manufacturers related to remanufacturing or rebuilding this product.
Standard

Automotive Starter Remanufacturing Procedures
2008-06-09
CURRENT
J2073_200806
These manufacturing procedures are recommended minimum guidelines for use by remanufacturers of light-duty automotive starters to promote consistent reliability, durability, and safety of remanufactured starters. Installation of remanufactured or rebuilt products is often an economical way to repair a vehicle even though the products may not be identical to original equipment parts. Before processing any part, a remanufacturer should determine if the original design and present condition of the core are suitable for remanufacturing so as to provide durable operation of the part as well as acceptable performance when installed on the vehicle. The remanufacturer should also consider the safety aspects of the product and any recommendations of the original manufacturers related to remanufacturing or rebuilding their product.
Standard

Dynamic Flex Fatigue Test for Slab Polyurethane Foam
1998-06-01
CURRENT
J388_199806
This SAE Recommended Practice describes a laboratory test procedure for evaluating the loss of thickness and the amount of structural breakdown of slab polyurethane foam seating materials. A test specimen is measured for thickness under a specified load and subsequently subjected simultaneously to compressive and shear deformation in a controlled atmosphere. This is accomplished by subjecting the foam to a rolling shearing action under a constant load for a specified number of cycles. Specimen thickness under a constant load is obtained after a 1hr recovery period following dynamic fatigue to determine loss in foam thickness.
Standard

FILTER AND FILTER ELEMENT FOR HYDRAULIC SYSTEM(S) USED ON MANUFACTURING AND ASSEMBLY EQUIPMENT
1994-02-01
HISTORICAL
J2066_199402
This SAE Standard establishes a common specification and ordering code for hydraulic filter assemblies and hydraulic filter elements, and establishes minimum performance criteria and test methods. This document establishes two filter diameter sizes, five basic micron ratings, and two basic collapse ratings. These classifications will satisfy most hydraulic filter applications, and thereby can minimize inventory requirements for hydraulic filter elements.
Standard

Filter and Filter Element for Hydraulic System(s) Used on Manufacturing and Assembly Equipment
2019-10-02
CURRENT
J2066_201910
This SAE Standard establishes a common specification and ordering code for hydraulic filter assemblies and hydraulic filter elements, and establishes minimum performance criteria and test methods. This document establishes two filter diameter sizes, five basic micron ratings, and two basic collapse ratings. These classifications will satisfy most hydraulic filter applications, and thereby can minimize inventory requirements for hydraulic filter elements.
Standard

Heavy-Duty Starter Remanufacturing Procedures
2008-11-26
CURRENT
J2237_200811
These remanufacturing procedures are recommended minimum guidelines (with the understanding that more stringent procedures are acceptable) for use by remanufacturers of heavy-duty starters to promote consistent reliability, durability, and safety of remanufactured starters. Installation of remanufactured or rebuilt products is often an economical way to repair an application even though the products may not be identical to original equipment parts. Before processing any part, a remanufacturer should determine if the original design and present condition of the core are suitable for remanufacturing so as to provide durable operation of the part as well as acceptable performance when installed on the application. The remanufacturer should also consider the safety aspects of the product and any recommendations of the original manufacturers related to remanufacturing or rebuilding their product.
Standard

Motor Vehicle Seat Belt Anchorages - Test Procedure
2014-10-28
HISTORICAL
J384_201410
This SAE Recommended Practice specifies performance requirements and test procedures for the strength and location of seat belt assembly anchorages. It applies to seat belt anchorages attached to vehicle body structure or to seat assemblies in the vehicle. Design Considerations are specified in SAE J383.
Standard

NUMBERING SYSTEM FOR REAMERS
1990-11-01
HISTORICAL
J2124_199011
This SAE Recommended Practice provides a systematic method for the identification of various types of hand, machine, and shell reamers used in industrial applications. When used as recommended in this report, the numbering system will assist in obtaining consistent reamer descriptions in communications. The report was developed in cooperation with the Automotive Industry Action Group (AIAG).
Standard

NUMBERING SYSTEM FOR STANDARD DRILLS
1990-11-01
HISTORICAL
J2122_199011
This SAE recommended practice provides a systematic method for the identification of standard drills. It is intended to assist in the cataloging and supplying of these tools. The report was developed in cooperation with the Automotive Industry Action Group (AIAG).
Standard

Numbering System for Multiple Diameter Cutting Tools
2019-10-09
CURRENT
J2276_201910
This SAE Recommended Practice provides a systematic method for the identification of multiple diameter cutting tools. It is intended to assist in the cataloging and supplying of these tools. NOTE 1— Caution must be taken when assigning codes for designators to prevent specifying cutting tools that cannot be physically or economically manufactured. NOTE 2— In particular without limitation, SAE disclaims all responsibility for the accuracy or completeness of information contained within this report if the standards of this report are retrieved, combined, or used in connection with any software.
Standard

Numbering System for Multiple Diameter Cutting Tools
1998-10-13
HISTORICAL
J2276_199810
This SAE Recommended Practice provides a systematic method for the identification of multiple diameter cutting tools. It is intended to assist in the cataloging and supplying of these tools. NOTE 1— Caution must be taken when assigning codes for designators to prevent specifying cutting tools that cannot be physically or economically manufactured. NOTE 2— In particular without limitation, SAE disclaims all responsibility for the accuracy or completeness of information contained within this report if the standards of this report are retrieved, combined, or used in connection with any software.
Standard

Numbering System for Single Diameter and Taper Reamers
2019-10-09
CURRENT
J2124_201910
This SAE Recommended Practice provides a systematic method for the identification of single diameter and taper reamers. It is intended to assist in the cataloging and supplying of these tools. NOTE 1— Caution must be taken when assigning codes for designators to prevent specifying reamers that cannot be physically or economically manufactured. NOTE 2— The Code Number coming from the manufacturer MUST reflect the actual tool construction. NOTE 3— In particular without limitation, SAE disclaims all responsibility for the accuracy or completeness of information contained within this report if the standards of this report are retrieved, combined, or used in connection with any software.
Standard

Numbering System for Single Diameter and Taper Reamers
1998-10-14
HISTORICAL
J2124_199810
This SAE Recommended Practice provides a systematic method for the identification of single diameter and taper reamers. It is intended to assist in the cataloging and supplying of these tools. NOTE 1— Caution must be taken when assigning codes for designators to prevent specifying reamers that cannot be physically or economically manufactured. NOTE 2— The Code Number coming from the manufacturer MUST reflect the actual tool construction. NOTE 3— In particular without limitation, SAE disclaims all responsibility for the accuracy or completeness of information contained within this report if the standards of this report are retrieved, combined, or used in connection with any software.
Standard

Numbering System for Taps
1998-10-14
HISTORICAL
J2123_199810
This SAE Recommended Practice provides a systematic method for the identification of ground thread taps for inch sizes up to 9.999 in with a Maximum Thread-per-Inch of 99.9, and Metric sizes up to 99.9 mm with a Maximum pitch of 9.99 mm. It is intended to assist in the cataloging and supplying of these tools. It is not intended for ACME, Buttress, or similar type thread forms. NOTE 1— Caution must be taken when assigning codes to prevent specifying taps that cannot be physically or economically manufactured. NOTE 2— The Code Number coming from the manufacturer MUST reflect the actual tool construction. NOTE 3— In particular without limitation, SAE disclaims all responsibility for the accuracy or completeness of information contained within this report if the standards of this report are retrieved, combined, or used in connection with any software.
Standard

Numbering System for Taps
2019-10-09
CURRENT
J2123_201910
This SAE Recommended Practice provides a systematic method for the identification of ground thread taps for inch sizes up to 9.999 in with a Maximum Thread-per-Inch of 99.9, and Metric sizes up to 99.9 mm with a Maximum pitch of 9.99 mm. It is intended to assist in the cataloging and supplying of these tools. It is not intended for ACME, Buttress, or similar type thread forms. NOTE 1— Caution must be taken when assigning codes to prevent specifying taps that cannot be physically or economically manufactured. NOTE 2— The Code Number coming from the manufacturer MUST reflect the actual tool construction. NOTE 3— In particular without limitation, SAE disclaims all responsibility for the accuracy or completeness of information contained within this report if the standards of this report are retrieved, combined, or used in connection with any software.
Standard

Numbering Systems for End Mills
2019-10-09
CURRENT
J2342_201910
This SAE Recommended Practice provides a systematic method for the identification of End Mills. It is intended to assist in the cataloging and supplying of these tools. NOTE 1— Caution must be taken when assigning codes for designation to prevent specifying cutting tools that cannot be physically or economically manufactured. NOTE 2— In particular without limitation, SAE disclaims all responsibility for the accuracy or completeness of information contained within this report if the standards of this report are retrieved, combined, or used in connection with any software.
Standard

Numbering Systems for End Mills
1999-01-20
HISTORICAL
J2342_199901
This SAE Recommended Practice provides a systematic method for the identification of End Mills. It is intended to assist in the cataloging and supplying of these tools. NOTE 1— Caution must be taken when assigning codes for designation to prevent specifying cutting tools that cannot be physically or economically manufactured. NOTE 2— In particular without limitation, SAE disclaims all responsibility for the accuracy or completeness of information contained within this report if the standards of this report are retrieved, combined, or used in connection with any software.
Standard

PASSENGER CAR SIDE DOOR LATCHES
1962-11-01
HISTORICAL
J839_196211
The scope of this SAE Recommended Practice is to establish recommended uniform test procedures and minimum static load requirements for passenger car side door latches. It is limited to tests that can be conducted on uniform test fixtures and equipment in commercially available laboratory test facilities. The test procedures and minimum performance requirements outlined in this recommended practice are based on currently available engineering data. It is intended that all portions of the recommended practice will be periodically reviewed and revised, as additional knowledge regarding vehicle latch performance under impact conditions is developed.
123Next >Last >>
X