Refine Your Search

Date

Date

Topic

Topic

Seals and gaskets Manufacturing processes Regulations Electrical, Electronics, and Avionics AGE-2 Air Cargo Chassis

Search Results

Viewing 1 to 20 of 90
123Next >Last >>
Sort by title
Standard

AIR MODE GENERAL PURPOSE CONTAINERS
2008-06-22
HISTORICAL
AS4041A
This SAE Aerospace Standard (AS) establishes the basic requirements for the design, construction and testing of air mode 2.44 m X 2.44 m (8 ft X 8 ft) cross-section containers. These containers are to be used exclusively in conjunction with the air mode in freighter versions of wide-body commercial transport aircraft. Air mode containers will normally be on aircraft roller conveying systems and/or on similarly equipped ancillary ground handling devices. Similar requirements for air/surface (intermodal) containers are provided in AS832.
Standard

AIR-LAND DEMOUNTABLE CARGO PALLET NETS
1975-08-01
HISTORICAL
AS1131A
This document establishes four sizes of basic pallet nets as follows: Size F (10 ft) - To restrain a 96 x 117.75 x 96 in. (2,43 x 2,99 x 2,43 m) high (maximum) load. Size G (20 ft) - To restrain a 96 x 238.500 x 96 in. (2,43 x 6,05 x 2,43 m) high (maximum) load. Size H (30 ft) - To restrain a 96 x 359.25 x 96 in. (2,43 x 9,12 x 2,43 m) high (maximum) load. Size J (40 ft) - To restrain a 96 x 480 x 96 in. (2,43 x 12,19 x 2,43 m) high (maximum) load.
Standard

AIRCRAFT ENGINE TRANSPORT DEVICES
1992-12-01
HISTORICAL
ARP1840
The tests are static in nature to minimize complexity and cost of required testing facilities. As far as practical, applied static loads should take into account the combined static and dynamic loads anticipated in service.
Standard

AS36100 Background and Development Record
2006-02-28
HISTORICAL
AIR36107
This SAE Aerospace Information Report (AIR) provides a record of the development by SAE AGE-2A Air Cargo Sub-Committee of Aerospace Standard AS36100, Air Cargo Unit Load Devices - Performance Requirements and Test Parameters, published 2005-02, intended as a technical reference for airworthiness approval of air cargo unit load devices (pallets, nets and containers) to be loaded with either baggage or freight on board civil transport aircraft, and to partly supersede previously used NAS 3610, Cargo unit load devices - Specification for - [Revision 10, 1990, referenced in TSO C90c].
Standard

AUTO TRANSPORT UNIT LOAD DEVICE
1992-02-01
HISTORICAL
ARP1554A
The tests are static in nature to minimize complexity and cost of required testing facilities. As far as practical, applied static loads should take into account the combined static and dynamic loads anticipated in service.
Standard

AUTO TRANSPORT UNIT LOAD DEVICES
1984-10-01
HISTORICAL
ARP1554
The tests are static in nature to minimize complexity and cost of required testing facilities. As far as practical, applied static loads should take into account the combined static and dynamic loads anticipated in service.
Standard

Air Cargo Pallet Extenders
2009-12-10
HISTORICAL
AS1988A
This SAE Aerospace Standard (AS) establishes the dimensional and operational requirements for pallet extension devices. It provides support for items of cargo beyond either the short or the long sides of a pallet, allowing increased volume to be achieved in conjunction with pallets meeting the requirements of AS1491 plus additional pallet sizes usable with extenders.
Standard

Air Cargo Unit Load Devices - Load Distribution Model
2004-01-14
HISTORICAL
AS36101
This SAE Aerospace Standard (AS) defines an industry agreed reference model for load distribution on air cargo unit load device (ULD) bases, to reflect maximum allowable center of gravity (CG) eccentricity and ensure the maximum allowable area load is not exceeded.
Standard

Air Cargo Unit Load Devices - Performance Requirements and Test Parameters
2016-06-06
HISTORICAL
AS36100B
This SAE Aerospace Standard (AS) defines the minimum performance requirements and test parameters for air cargo unit load devices requiring approval of airworthiness for installation in an approved aircraft cargo compartment and restraint system that complies with the cargo restraint requirements of Title 14 CFR Part 25, except for the 9.0g forward ultimate inertia force of § 25.561 (b)(3)(ii).
Standard

Air Cargo Unit Load Devices – Performance Requirements and Test Parameters
2011-12-12
HISTORICAL
AS36100A
This SAE Aerospace Standard (AS) defines the minimum performance requirements and test parameters for air cargo unit load devices requiring approval of airworthiness for installation in an approved aircraft cargo compartment and restraint system that complies with the cargo restraint and occupant protection requirements of Title 14 CFR Part 25, except for the 9.0g forward ultimate inertia force of § 25.561 (b)(3)(ii).
Standard

Air Cargo Unit Load Devices – Testing Methods
2022-06-27
WIP
AS36102C
This SAE Aerospace Standard (AS) specifies the testing methods to be used to substantiate performance of air cargo containers, pallets and nets (Unit Load Devices) for airworthiness approval in accordance with NAS 3610 or AS36100.
Standard

Air Mode Active Containers Conditioning Performance
2010-11-15
CURRENT
ARP5741
This Aerospace Recommended Practice (ARP) defines a series of test procedures to determine the temperature conditioning performance of air mode containers with active conditioning systems, a classification system for air mode containers with active condition systems, a standard means of expressing conditioning performance within each classification and a standard means of documenting test results.
Standard

Air Mode General Purposes Containers
2014-03-25
CURRENT
AS4041B
This SAE Aerospace Standard (AS) establishes the basic requirements for the design, construction and testing of air mode 2.44 m × 2.44 m (8 ft × 8 ft) cross-section containers. These containers are to be used exclusively in conjunction with the air mode in freighter versions of wide-body commercial transport aircraft. Air mode containers will normally be on aircraft roller conveying systems and/or on similarly equipped ancillary ground handling devices. Similar requirements for air/surface (intermodal) containers are provided in AS832.
Standard

Air and Air/Surface (Platform) Cargo Pallet Nets
2018-10-18
CURRENT
AS1131C
This SAE Aerospace Standard (AS) provides dimensional, structural and environmental requirements for pallet nets to be used in conjunction with 2.44 m (8 ft) wide pallets described in AS1130. The pallet/net combination are used in freighter versions of certificated aircraft equipped to provide restraint to pallets tested to the requirements of NAS 3610 Class II restraint system. The minimum essential criteria are identified by use of the key word "shall". Recommended criteria are identified by use of the key word "should", and while not mandatory, are considered to be primary importance in providing serviceable, economical, and practical air transport pallet nets. Deviation from recommended criteria should occur only after careful consideration, extensive testing, and thorough service evaluation have shown alternate methods to be satisfactory.
Standard

Aircraft Cargo Systems - Missing Restraint Limitations Layouts
2009-12-10
HISTORICAL
ARP5492
This SAE Aerospace Recommended Practice (ARP) provides recommendations for aircraft manufacturers and operating carriers about how to establish common information for the use of cargo systems with missing/inoperative restraints. Because of the fact that the certified restriction requirements due to missing/inoperative restraints are dependent of the specific aircraft structure and the system layout of the cargo loading system, this document shall only recommend common layout of information for the users based on the certified data provided to allow for common training, understanding and handling. This shall be used right from the beginning for future aircraft types for certified data.
Standard

Aircraft Cargo Systems - Missing Restraint Limitations Layouts
2014-12-28
CURRENT
ARP5492A
This SAE Aerospace Recommended Practice (ARP) provides recommendations for aircraft manufacturers and operating carriers about how to establish common information for the use of cargo systems with missing/inoperative restraints. Because of the fact that the certified restriction requirements due to missing/inoperative restraints are dependent of the specific aircraft structure and the system layout of the cargo loading system, this document shall only recommend common layout of information for the users based on the certified data provided to allow for common training, understanding and handling. This shall be used right from the beginning for future aircraft types for certified data.
Standard

Aircraft Engine Transport Devices
2000-01-01
HISTORICAL
ARP1840A
The tests are static in nature to minimize complexity and cost of required testing facilities. As far as practical, applied static loads should take into account the combined static and dynamic loads anticipated in service.
123Next >Last >>
X