Refine Your Search

Date

Date

Topic

Topic

Coatings, colorants, and finishes Suppliers Vehicles and equipment A-6C2 Seals Committee Logistics

Search Results

Viewing 1 to 20 of 85
123Next >Last >>
Sort by title
Standard

AEROSPACE STANDARD, GLAND DESIGN, O-RING AND OTHER ELASTOMERIC SEALS
1993-06-11
HISTORICAL
AS4716
This SAE Aerospace Standard provides standardized gland (groove) design criteria and dimensions for elastomeric seal glands for static and dynamic applications. The glands have been specifically designed for applications using SAE AS568 size O-rings at pressures exceeding 1500 psi utilizing one or two anti-extrusion (backup) rings and applications at pressures under 1500 psi without backup rings. The glands have been sized to provide sufficient squeeze for effective sealing while at the same time limiting squeeze to allow satisfactory operation in dynamic applications. While specifically designed for standard size O-rings, these glands are also to be used with other elastomeric seals.
Standard

Aerospace Rod Scraper Gland Design Standard
2020-11-03
CURRENT
AS4088F
This SAE Aerospace Standard (AS) defines gland details for scrapers for rod diameters from 1/4 to 15-1/2 inch (6.35 to 393.70 mm) inclusive, corresponding to AS568 O-ring Dash No. sizes -108/-111, -206/-222, -325/-349, and -425/-460. The gland details herein allow the use of more stable, efficient, and reliable scraper devices than MS33675 glands.
Standard

Aerospace Rod Scraper Gland Design Standard
2018-02-06
HISTORICAL
AS4088E
This SAE Aerospace Standard (AS) defines gland details for scrapers for rod diameters from 1/4 to 15-1/2 inch (6.35 to 393.70 mm) inclusive, corresponding to AS568 O-ring Dash No. sizes -108/-111, -206/-222, -325/-349, and -425/-460. The gland details herein allow the use of more stable, efficient and reliable scraper devices than MS33675 glands. NOTE: Scraper configurations are not specified in this document.
Standard

Aerospace Size Standard for O-Rings
2020-09-29
CURRENT
AS568F
This SAE Aerospace Standard (AS) specifies the inside diameters, cross-sections, tolerances, and size identification codes (dash numbers) for O-rings used in sealing applications and for straight thread tube fitting boss gaskets. The dimensions and tolerances specified in this standard are suitable for any elastomeric material provided that suitable tooling is available.
Standard

Aerospace Size Standard for O-Rings
2001-03-01
HISTORICAL
AS568B
This Aerospace Standard specifies the inside diameters, cross-sections, tolerances, and size identification codes (dash numbers) for O-rings used in sealing applications and for straight thread tube fitting boss gaskets. The dimensions and tolerances specified in this standard are suitable for any elastomeric material provided that suitable tooling is available.
Standard

Aerospace Size Standard for O-rings
2008-12-03
HISTORICAL
AS568C
This Aerospace Standard specifies the inside diameters, cross-sections, tolerances, and size identification codes (dash numbers) for O-rings used in sealing applications and for straight thread tube fitting boss gaskets. The dimensions and tolerances specified in this standard are suitable for any elastomeric material provided that suitable tooling is available.
Standard

Aerospace Size Standard for O-rings
2014-03-11
HISTORICAL
AS568D
This SAE Aerospace Standard (AS) specifies the inside diameters, cross-sections, tolerances, and size identification codes (dash numbers) for O-rings used in sealing applications and for straight thread tube fitting boss gaskets. The dimensions and tolerances specified in this standard are suitable for any elastomeric material provided that suitable tooling is available.
Standard

Aerospace, Slipper Seals, Selection for Fluid Power Applications
2022-08-05
CURRENT
AIR1244B
This SAE Aerospace Information Report (AIR) provides basic information on the use of slipper seal sealing devices when used as piston (OD) and rod (ID) seals in aerospace fluid power components such as actuators, valves, and swivel joints, including: The definition of a slipper seal and the description of the basic types in use. Guidelines for selecting the type of slipper seal for a given design requirement are provided in terms of friction, leakage, service life, installation characteristics, and interchangeability.
Standard

Face Seal Gland Design, Static, O-ring and Other Seals for Aerospace Hydraulic and Pneumatic Applications
2014-09-30
HISTORICAL
AS6235
This SAE Aerospace Standard (AS) specifies standardized gland design criteria and dimensions for static face seals for internal pressure and external pressure applications for aerospace hydraulic and pneumatic applications using the same size range as AS4716 and AS5857 where applicable. Some small diameter sizes are excluded because they are not practical. The glands have been specifically designed for applications using AS568 size elastomeric O-rings with related Class 2 tolerances at nominal system operating pressures up to 3000 psi (20 680 kPa) utilizing no anti-extrusion (backup) rings. While the gland dimensions herein have been designed for pressures up to 3000 psi (20 680 kPa) these glands may be used for higher pressures, but extra precautions need to be taken and testing should be performed to ensure to ensure integrity of performance.
Standard

Face Seal Gland Design, Static, O-ring and Other Seals for Aerospace Hydraulic and Pneumatic Applications
2015-12-19
HISTORICAL
AS6235A
This SAE Aerospace Standard (AS) specifies standardized gland design criteria and dimensions for static face seals for internal pressure and external pressure applications for aerospace hydraulic and pneumatic applications using the same size range as AS4716 and AS5857 where applicable. Some small diameter sizes are excluded because they are not practical. The glands have been specifically designed for applications using AS568 size elastomeric O-rings with related Class 2 tolerances at nominal system operating pressures up to 3,000 psi (20,680 kPa) utilizing no anti-extrusion (backup) rings. While the gland dimensions herein have been designed for pressures up to 3,000 psi (20,680 kPa) these glands may be used for higher pressures, but extra precautions need to be taken and testing should be performed to ensure integrity of performance.
Standard

GASKET, METALLIC, ENCASED, ANNULAR, COPPER
2021-10-15
HISTORICAL
AS35769B
THIS STANDARD ESTABLISHES THE DIMENSIONAL AND VISUAL QUALITY REQUIREMENTS, LOT REQUIREMENTS, AND PACKAGING AND LABELLING REQUIREMENTS FOR METALLIC-ENCASED COPPER GASKETS MANUFACTURED PER AMS-HH-G-101 TYPE III - STYLE J. IT SHALL BE USED FOR PROCUREMENT PURPOSES.
Standard

GASKET, METALLIC, ENCASED, ANNULAR, COPPER
2021-12-13
CURRENT
AS35769C
THIS STANDARD ESTABLISHES THE DIMENSIONAL AND VISUAL QUALITY REQUIREMENTS, LOT REQUIREMENTS, AND PACKAGING AND LABELLING REQUIREMENTS FOR METALLIC-ENCASED COPPER GASKETS MANUFACTURED PER AMS-HH-G-101 TYPE III - STYLE J. IT SHALL BE USED FOR PROCUREMENT PURPOSES.
Standard

Gland Design, O-Ring and Other Elastomeric Seals, Static Applications
2022-08-17
CURRENT
AS5857A
This SAE Aerospace Standard (AS) provides standardized gland (groove) design criteria and dimensions for elastomeric seal glands for static applications. The glands have been specifically designed for applications using SAE AS568 size O-rings at pressures exceeding 1500 psi (10.3 MPa) utilizing one or two anti-extrusion (backup) rings and applications at pressures under 1500 psi (10.3 MPa) without backup rings. The glands have been sized to provide increased squeeze as compared to AS4716 for more effective sealing at low temperatures and low seal swell conditions. These glands are not recommended for dynamic use. Primary usage is for static external sealing. The rod dimensions are the same as AS4716. The cylinder bore dimensions are the same as AS4716 except for sizes -001 thru -011 and -104 thru -113.
Standard

Gland Design, O-Ring and Other Seals
2021-11-09
CURRENT
AS4716D
This SAE Aerospace Standard (AS) provides standardized gland (groove) design criteria and dimensions for O-ring seal glands for static and dynamic applications, and other seals.
Standard

Gland Design, O-ring and Other Elastomeric Seals
2005-07-21
HISTORICAL
AS4716A
This SAE Aerospace Standard (AS) provides standardized gland (groove) design criteria and dimensions for elastomeric seal glands for static and dynamic applications. The glands have been specifically designed for applications using SAE AS568 size O-rings, with related class 2 tolerances, at pressures exceeding 1500 psi (10,342 kPa) utilizing one or two anti-extrusion (backup) rings and applications at pressures under 1500 psi (10,342 kPa) without backup rings. The glands have been sized to provide sufficient squeeze for effective sealing while at the same time limiting squeeze to allow satisfactory operation in dynamic applications. While this specification covers the basic design criteria and recommendations for use with standard size O-rings, these glands are also suitable for use with other elastomeric, and polytetrafluoroethylene (PTFE) based seals and packings.
Standard

Gland Design, O-ring and Other Elastomeric Seals
2011-03-14
HISTORICAL
AS4716B
This SAE Aerospace Standard (AS) provides standardized gland (groove) design criteria and dimensions for elastomeric seal glands for static and dynamic applications. The glands have been specifically designed for applications using SAE AS568 size O-rings, with related class 2 tolerances, at pressures exceeding 1500 psi (10.34 MPa) utilizing one or two anti-extrusion (backup) rings and applications at pressures below 1500 psi (10.34 MPa) without backup rings. The glands have been sized to provide sufficient squeeze for effective sealing while at the same time limiting squeeze to allow satisfactory operation in dynamic applications. While this specification covers the basic design criteria and recommendations for use with standard size O-rings, these glands are also suitable for use with other elastomeric, and polytetrafluoroethylene (PTFE) based seals.
123Next >Last >>
X