Refine Your Search

Date

Date

Lighting Standard Practices Committee Data management Safety regulations and standards Coatings, colorants, and finishes Heat resistant materials

Search Results

Viewing 1 to 20 of 28
12Next >Last >>
Sort by title
Standard

Absorptive and Interference Coatings Applied on Replaceable Headlamp Bulbs
2011-02-24
CURRENT
J2739_201102
This report investigates the use of single and multi-layer coatings on replaceable headlamp bulbs and how such coatings can affect the performance of bulbs in terms of light scattering, which can contribute to glare, and spectral separation in headlamps. Tests were developed to investigate the effects of absorptive and interference (multi-layer) coatings on bulbs, and on bulbs in headlamp systems. These tests provide validation for a proposed bulb color separation test, which establishes limits for spectral separation within the boundaries of SAE J578 white color requirements. The bulb color separation test provides a definitive selection criterion to identify bulbs that cause excessive light scatter (glare) and/or spectral separation in an optical system.
Standard

BULB SOCKETS
1964-04-01
HISTORICAL
J567B_196404
This SAE Standard covers dimensional and performance requirements for bulb sockets intended for use in motor vehicles.
Standard

COLOR SPECIFICATION
1988-05-01
HISTORICAL
J578_198805
This standard defines and provides a means for the control of colors employed in motor vehicle external lighting equipment, including lamps and reflex reflectors. The standard applies to the overall effective color of light emitted by the device in any given direction and not to the color of the light from a small area of the lens. It does not apply to pilot, indicator, or tell-tale lights.
Standard

COLOR SPECIFICATION FOR ELECTRIC LAMPS
1958-05-01
HISTORICAL
J578_195805
The purpose of this specification is to provide standards for colors employed in motor vehicle lighting equipment. It is intended to cover the colors of red, amber (yellow), and uncolored (white) transmitting media. Color applies to the overall effective signal color and not to the color from a small area of the lens.
Standard

COLOR SPECIFICATION FOR ELECTRIC SIGNAL LIGHTING DEVICES
1978-09-01
HISTORICAL
J578D_197809
The purpose of this standard is to define and provide for the control of colors employed in motor vehicle external lighting equipment. The specification applies to the overall effective color of light emitted by the device and not to the color of the light from a small area of the lens. It does not apply to any pilot, indicator, or tell-tale lights.
Standard

COLOR SPECIFICATION FOR ELECTRIC SIGNAL LIGHTING DEVICES
1977-02-01
HISTORICAL
J578C_197702
The purpose of this standard is to define and provide for the control of colors employed in motor vehicle external lighting equipment. The specification applies to the overall effective color of light emitted by the device and not to the color of the light from a small area of the lens. It does not apply to any pilot, indicator, or tell-tale lights.
Standard

COLOR SPECIFICATION FOR ELECTRIC SIGNAL LIGHTING DEVICES
1974-09-01
HISTORICAL
J578B_197409
The purpose of this standard is to define and provide for the control of colors employed in motor vehicle external lighting equipment. The specification applies to the overall effective color of light emitted by the device and not to the color of the light from a small area of the lens. It does not apply to any pilot, indicator, or tell tale lights.
Standard

COLOR SPECIFICATION FOR ELECTRIC SIGNAL LIGHTING DEVICES
1966-10-01
HISTORICAL
J578A_196610
The purpose of this specification is to define and provide for the control of colors employed in motor vehicle lighting equipment. The specification applies to the overall effective color of light emitted by the device and not to the color of light from a small area of the cover lens.
Standard

COLOR SPECIFICATION FOR ELECTRIC SIGNAL LIGHTING DEVICES
1965-04-01
HISTORICAL
J578A_196504
The purpose of this specification is to define and provide for the control of colors employed in motor vehicle lighting equipment. The specification applies to the overall effective color of light emitted by the device and not to the color of light from a small area of the cover lens.
Standard

Chromaticity Requirements for Ground Vehicle Lamps and Lighting Equipment
2020-04-29
CURRENT
J578_202004
This SAE Standard defines and provides a means for the control of colors employed in motor vehicle external lighting equipment, including lamps and reflex reflectors. The document applies to the overall effective color of light emitted by the device in any given direction, and not to the color of the light from a small area of the lens. It does not apply to pilot, indicator, or tell-tale lights.
Standard

Color Specification
2012-07-20
HISTORICAL
J578_201207
This SAE Standard defines and provides a means for the control of colors employed in motor vehicle external lighting equipment, including lamps and reflex reflectors. The document applies to the overall effective color of light emitted by the device in any given direction and not to the color of the light from a small area of the lens. It does not apply to pilot, indicator, or tell-tale lights.
Standard

Color Specification
2006-12-11
HISTORICAL
J578_200612
This SAE Standard defines and provides a means for the control of colors employed in motor vehicle external lighting equipment, including lamps and reflex reflectors. The document applies to the overall effective color of light emitted by the device in any given direction and not to the color of the light from a small area of the lens. It does not apply to pilot, indicator, or tell-tale lights.
Standard

Color Specification
2019-02-26
HISTORICAL
J578_201902
This SAE Standard defines and provides a means for the control of colors employed in motor vehicle external lighting equipment, including lamps and reflex reflectors. The document applies to the overall effective color of light emitted by the device in any given direction, and not to the color of the light from a small area of the lens. It does not apply to pilot, indicator, or tell-tale lights.
Standard

Color Specification
2016-03-11
HISTORICAL
J578_201603
This SAE Standard defines and provides a means for the control of colors employed in motor vehicle external lighting equipment, including lamps and reflex reflectors. The document applies to the overall effective color of light emitted by the device in any given direction and not to the color of the light from a small area of the lens. It does not apply to pilot, indicator, or tell-tale lights.
Standard

Forward Lighting Halogen Bulb Performance Requirements for Motor Vehicles
2007-07-19
HISTORICAL
J2560_200707
This SAE Recommended Practice is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances. This document establishes performance requirements, material requirements, design requirements, and design guidelines for forward lighting halogen replaceable bulbs.
Standard

Halogen Light Source Performance Requirements for Motor Vehicle Forward Lighting
2019-09-04
CURRENT
J2560_201909
This document establishes performance, material, and design requirements and design guidelines for halogen replaceable light sources used in road illumination devices for forward lighting. Non-halogen filament light sources suitable for forward lighting are specified in SAE J573. The terms “high beam filament” and “low beam filament” used throughout this document refer only to typical use, not to a mandatory, exclusive, or universal function of the filaments. This SAE Recommended Practice is periodically updated to keep pace with experience and technical advances.
Standard

LED Replacement Light Sources for Halogen Light Sources
2017-06-28
WIP
J3145
This SAE Recommended Practice is intended as a guide for specifying LED Substitute Light Sources as Equivalents for corresponding RID filament light sources and is subject to change to keep pace with experience and technical advances. This document defines criteria for technical equivalence in order to make a substitution of a filament light source with an LED light source without compromising the performance of the RID device.
Standard

LIGHTING IDENTIFICATION CODE
1991-06-01
HISTORICAL
J759_199106
This SAE Recommended Practice provides the lighting function identification codes for use on all passenger cars and trucks.
12Next >Last >>
X