This specification covers procedures for ultrasonic immersion inspection of premium-grade wrought titanium and titanium alloy round billet 5 inches (127 mm) and over in nominal diameter (see 2.6.1). Metal alloy billets other than titanium may be tested to this specification with the use of suitable reference standards.
Long wave ultraviolet or UV-A radiation (between 320 to 400 nm) is used for fluorescent inspections in magnetic particle and liquid penetrant examinations. The UV-A radiation is obtained from either fluorescent or high intensity discharge lamps that are stationary or portable. The commercially available UV-A lamps possess a large variation in intensity output that can cause a legitimate concern for possible health hazard. This draft reviews the nature of UV-A radiation emitted by these lights, blacklight equipment, acceptable UV dosage limits adopted by the American Conference of Governmental Industrial Hygienists (ACGIH) and the European Standards Committee for Nondestructive Testing, and recommendation of proper practices when working with UV-A radiation.
This specification establishes requirements, instructions, and procedures to ensure that fluorescent penetrant inspections are capable of achieving an acceptable level of defect detection on aircraft and engine components during maintenance and overhaul operations.
This specification details requirements and procedures for the detection of defects in aircraft and engine components during maintenance and overhaul operations.
This specification details requirements and procedures for the detection of defects in aircraft structural and engine components during maintenance and overhaul operations.
This specification details requirements and procedures for the detection of defects in aircraft and engine components during maintenance and overhaul operations.
This specification details requirements and procedures for the detection of defects in aircraft and engine components during maintenance and overhaul operations.
This specification details requirements and procedures for the detection of defects in aircraft and engine components during maintenance and overhaul operations.
This specification details requirements and procedures for the detection of defects in aircraft and engine components during maintenance and overhaul operations.
This specification details requirements and procedures for the detection of defects in aircraft and engine components during maintenance and overhaul operations.
This specification establishes the classification, technical requirements, tests, and test procedures for the qualification, approval, and quality verification of all materials used in the liquid penetrant methods of inspection with the exception of those excluded in the application section.
This specification establishes the classification, technical requirements, tests, and test procedures for the qualification, approval, and quality verification of all materials used in the liquid penetrant methods of inspection with the exception of those excluded in the application section.
This specification establishes the classification, technical requirements, tests, and test procedures for the qualification, approval, and quality verification of all materials used in the liquid penetrant methods of inspection with the exception of those excluded in the application section.
This specification establishes the classification, technical requirements, tests, and test procedures for the qualification, approval, and quality verification of all materials used in the liquid penetrant methods of inspection with the exception of those excluded in the application section.
This specification establishes the classification, technical requirements, tests, and test procedures for the qualification, approval, and quality verification of all materials used in the liquid penetrant methods of inspection with the exception of those excluded in the application section.
This specification covers both the material and the examination process of an inspection material in the form of a dispersion of magnetic particles in a controlled viscosity rubber base that cures at room temperature by addition of one or more curing agents. The test object is magnetized with the uncured rubber covering the area of interest. The magnetic particles then migrate to the leakage field caused by the discontinuity. As the rubber cures, discontinuity indications remain in place on the rubber. The product may be supplied in a variety of viscosities and colors.
This specification covers both the material and the examination process of an inspection material in the form of a dispersion of magnetic particles in a controlled viscosity rubber base that cures at room temperature by addition of one or more curing agents. The test object is magnetized with the uncured rubber covering the area of interest. The magnetic particles then migrate to the leakage field caused by the discontinuity. As the rubber cures, discontinuity indications remain in place on the rubber. The product may be supplied in a variety of viscosities and colors.
This specification covers magnetic particles having black, red, or other color, as ordered, supplied in the form of a mixed, ready-to-use suspension in an odorless inspection oil vehicle.