Search Results

Standard

CAST STEEL SHOT

1990-03-01

HISTORICAL

J827_199003

This SAE Recommended Practice describes chemical analysis, hardness, microstructure and physical characteristic requirements for cast steel shot to be used for shot peening or blast cleaning operations.

Standard

CAST STEEL SHOT

1962-06-01

HISTORICAL

J827_196206

Standard

CAST STEEL SHOT

1969-01-01

HISTORICAL

J827_196901

Standard

CUT WIRE SHOT

1987-05-01

HISTORICAL

J441_198705

Standard

CUT WIRE SHOT

1993-06-01

HISTORICAL

J441_199306

This SAE Recommended Practice is considered to be tentative and is subject to modification to meet new developments or requirements. It is offered as a guide in the selection and use of cut wire shot.

Standard

Cut Wire Shot

2013-10-16

HISTORICAL

J441_201310

This SAE Recommended Practice is considered to be tentative and is subject to modification to meet new developments or requirements. It is offered as a guide in the selection and use of cut wire shot.

Standard

DEFINITION FOR PARTICLE SIZE

1981-07-01

HISTORICAL

J391_198107

"Effective particle or domain size" is a phrase used in X-ray diffraction literature to describe the size of the coherent regions within a material which are diffracting. Coherency in this sense means diffracting as a unit. Small particle size causes X-ray line broadening and as such can be measured. It has been shown related to substructure as observed in transmission electron microscopy. Particle size is affected by hardening, cold working, and fatigue; conversely, there is increasing evidence that particle size, per se, affects both static and dynamic strength.

Standard

DEFINITIONS FOR MACROSTRAIN AND MICROSTRAIN

1985-08-01

HISTORICAL

J932_198508

In the analysis and measurement of residual stresses of materials, it has been noted that there are frequently differences in interpretation of the terms "macrostrain" and "microstrain." To assist communication among research personnel in this area, definitions for these two terms are suggested by the Fatigue Design and Evaluation Committee of SAE. Since "macrostress" is commonly computed from "macrostrain" in residual stress analysis, to be consistent, the definitions given are for "macrostrain" and "microstrain."

Standard

Definition for Particle Size

2011-06-01

CURRENT

J391_201106

"Effective particle or domain size" is a phrase used in X-ray diffraction literature to describe the size of the coherent regions within a material which are diffracting. Coherency in this sense means diffracting as a unit. Small particle size causes X-ray line broadening and as such can be measured. It has been shown related to substructure as observed in transmission electron microscopy. Particle size is affected by hardening, cold working, and fatigue; conversely, there is increasing evidence that particle size, per se, affects both static and dynamic strength.

Standard

Definitions for Macrostrain and Microstrain

2011-08-04

CURRENT

J932_201108

In the analysis and measurement of residual stresses of materials, it has been noted that there are frequently differences in interpretation of the terms "macrostrain" and "microstrain." To assist communication among research personnel in this area, definitions for these two terms are suggested by the Fatigue Design and Evaluation Committee of SAE. Since "macrostress" is commonly computed from "macrostrain" in residual stress analysis, to be consistent, the definitions given are for "macrostrain" and "microstrain."

Standard

High-Carbon Cast-Steel Grit

2013-10-16

HISTORICAL

J1993_201310

This SAE Recommended Practice describes the chemical composition, and physical characteristic requirements for high-carbon cast-steel grit, to be used for blast cleaning and etching operations.

Standard

High-Carbon Cast-Steel Grit

2019-02-21

CURRENT

J1993_201902

This SAE Recommended Practice describes the chemical composition, and physical characteristic requirements for high-carbon cast-steel grit, to be used for blast cleaning and etching operations.

Standard

High-Carbon Cast-Steel Shot

2013-10-16

HISTORICAL

J827_201310

This SAE Recommended Practice describes chemical composition and physical characteristic requirements for high-carbon cast-steel shot to be used for shot peening or blast cleaning operations.

Standard

High-Carbon Cast-Steel Shot

2019-10-31

CURRENT

J827_201910

This SAE Recommended Practice describes chemical composition and physical characteristic requirements for high-carbon cast-steel shot to be used for shot peening or blast cleaning operations.

Standard

METALLIC SHOT AND GRIT MECHANICAL TESTING

1996-04-01

HISTORICAL

J445_199604

This SAE Information Report is intended to provide users and producers of metallic shot and grit2 with general information on methods of mechanically testing metal shot in the laboratory.

Standard

METALLIC SHOT AND GRIT MECHANICAL TESTING

1984-08-01

HISTORICAL

J445_198408

This report is intended to provide users and producers of metallic shot and grit1 with general information on methods of mechanically testing metal shot in the laboratory.

Standard

Medical Device Shot Peening

2014-05-07

CURRENT

J3020_201405

This SAE Standard and its supplementary detail specifications cover the engineering requirements for the controlled shot peening of a medical device where shot peening is required for enhancement of a material's mechanical properties through the intentional creation of compressive residual stress.

Standard

Medical Device Shot Peening

2019-05-09

WIP

J3020

This SAE Standard and its supplementary detail specifications cover the engineering requirements for the controlled shot peening of a medical device where shot peening is required for enhancement of a material's mechanical properties through the intentional creation of compressive residual stress.

Standard

Metallic Shot and Grit Mechanical Testing

2022-05-04

CURRENT

J445_202205

This SAE Information Report is intended to provide users and producers of metallic shot and grit2 with general information on methods of mechanically testing metal shot in the laboratory.

Standard

Metallic Shot and Grit Mechanical Testing

2005-07-25

HISTORICAL

J445_200507

This SAE Information Report is intended to provide users and producers of metallic shot and grit2 with general information on methods of mechanically testing metal shot in the laboratory.