Search Results

Standard

ACOUSTICAL AND THERMAL MATERIALS TEST PROCEDURE

1989-10-01

HISTORICAL

J1324_198910

This SAE Recommended Practice provides test methods for determining the characteristics of acoustical and thermal materials. Where applicable, methods of test developed by SAE and ASTM have been referenced.

Standard

COMPRESSION AND RECOVERY OF INSULATION PADDINGS

1987-04-01

HISTORICAL

J1352_198704

This test method is applicable for determining the relative compression and recovery of various insulation paddings.

Standard

COMPRESSION AND RECOVERY OF INSULATION PADDINGS

1994-06-01

HISTORICAL

J1352_199406

This test method is applicable for determining the relative compression and recovery of fibrous insulation padding materials.

Standard

CORROSION TEST FOR INSULATION MATERIALS

1982-05-01

HISTORICAL

J1389_198205

This test applies to various insulation materials used in vehicles for control of heat and noise and other applications.

Standard

CORROSION TEST FOR INSULATION MATERIALS

1988-12-01

HISTORICAL

J1389_198812

This test applies to various insulation materials used in vehicles for control of heat and noise and other applications.

Standard

Compression and Recovery of Insulation Paddings

2005-01-19

HISTORICAL

J1352_200501

This test method is applicable for determining the relative compression and recovery of fibrous insulation padding materials.

Standard

Corrosion Test for Insulation Materials

2001-10-08

HISTORICAL

J1389_200110

This SAE Recommended Practice applies to various insulation materials used in vehicles for control of heat and noise and other applications.

Standard

Corrosion Test for Insulation Materials

2011-08-31

CURRENT

J1389_201108

This SAE Recommended Practice applies to various insulation materials used in vehicles for control of heat and noise and other applications.

Standard

HEAT INSULATION MATERIALS TEST PROCEDURE

1981-12-01

HISTORICAL

J1324_198112

This SAE Recommended Practice provides test methods for determining the characteristics of heat insulation materials. Where applicable, methods of test developed by SAE and ASTM have been referenced.

Standard

HEAT INSULATION MATERIALS TEST PROCEDURE

1984-11-01

HISTORICAL

J1324_198411

This SAE Recommended Practice provides test methods for determining the characteristics of acoustical and thermal materials. Where applicalbe, methods of test developed by SAE and ASTM have been referenced.

Standard

HOT PLATE METHOD FOR EVALUATING HEAT RESISTANCE AND THERMAL INSULATION PROPERTIES OF MATERIALS

1994-08-01

HISTORICAL

J1361_199408

This test method is applicable for rating various materials, such as automotive trim materials and insulation composites, for their ability to resist heat transfer, heat degradation, odor, smoking, and exothermic reaction.

Standard

HOT PLATE METHOD FOR EVALUATING HEAT RESISTANCE AND THERMAL INSULATION PROPERTIES OF MATERIALS

1987-04-01

HISTORICAL

J1361_198704

This test method is applicable for rating various materials, such as automotive trim materials and insulation composities, for their ability to resist heat transfer, heat degradation, odor, smoking, and exothermic reaction.

Standard

HOT PLATE METHOD FOR EVALUATING HEAT RESISTANCE AND THERMAL INSULATION PROPERTIES OF MATERIALS

1981-04-01

HISTORICAL

J1361_198104

This test method is applicable for rating various materials, such as automotive trim materials and insulation composites, for their ability to resist heat transfer, heat degradation, odor, smoking, and exothermic reaction.

Standard

Hot Plate Method for Evaluating Heat Resistance and Thermal Insulation Properties of Materials

2001-10-08

HISTORICAL

J1361_200110

This test method is applicable for rating various materials, such as automotive trim materials and insulation composites, for their ability to resist heat transfer, heat degradation, odor, smoking, and exothermic reaction.

Standard

Hot Plate Method for Evaluating Heat Resistance and Thermal Insulation Properties of Materials

2013-11-20

HISTORICAL

J1361_201311

This test method is applicable for rating various materials, such as automotive trim materials and insulation composites, for their ability to resist heat transfer, heat degradation, odor, smoking, and exothermic reaction under prescribed temperature.

Standard

Hot Plate Method for Evaluating Heat Resistance and Thermal Insulation Properties of Materials

2020-03-04

CURRENT

J1361_202003

This test method is applicable for rating various materials, such as automotive trim materials and insulation composites, for their ability to resist heat transfer, heat degradation, odor, smoking, and exothermic reaction under prescribed temperature.

Standard

LABORATORY MEASUREMENT OF THE COMPOSITE VIBRATION DAMPING PROPERTIES OF MATERIALS ON A SUPPORTING STEEL BAR

1993-02-01

HISTORICAL

J1637_199302

This SAE Recommended Practice describes a laboratory test procedure for measuring the vibration damping performance of a system consisting of a damping material bonded to a vibrating cantilevered steel bar. The bar is often called the Oberst bar (named after Dr. H. Oberst) and the test method is often called the Oberst Bar Test Method. Materials for damping treatments may include homogeneous materials, nonhomogeneous materials, or a combination of homogeneous, nonhomogeneous, and/or inelastic (such as aluminum foil) materials. These materials are commonly installed in transportation systems such as ground vehicles, marine products, and aircraft to reduce vibration at resonance, and thus reduce the noise radiation from the vibrating surface. However, the test method described herein was developed to rank order materials used in PASSENGER VEHICLE APPLICATIONS with steel sheet metal and may not be fully applicable to other situations.

Standard

Laboratory Measurement of Random Incidence Sound Absorption Tests Using a Small Reverberation Room

2021-07-13

WIP

J2883

This SAE Recommended Practice describes a laboratory test procedure for measuring the random incidence sound absorption performance of a material or a part in a small size reverberation room by measuring decay rates. The absorption performance may include sound absorption coefficient of the test sample and or the amount of energy absorbed by the test sample. Materials for absorption treatments may include homogeneous materials, nonhomogeneous materials, or a combination of homogeneous, nonhomogeneous, and/or inelastic impervious materials. These materials are commonly installed in the mobility products and in the transportation systems such as ground vehicles, marine products, aircraft, and commercial industry (in industrial and consumer products) to reduce reverberant sound build-up and thus reduce the noise level in the environment by minimizing reflections off of hard surfaces.

Standard

Laboratory Measurement of Random Incidence Sound Absorption Tests Using a Small Reverberation Room

2020-03-04

CURRENT

J2883_202003

This SAE Recommended Practice describes a laboratory test procedure for measuring the random incidence sound absorption performance of a material or a part in a small size reverberation room by measuring decay rates. The absorption performance may include sound absorption coefficient of the test sample and or the amount of energy absorbed by the test sample. Materials for absorption treatments may include homogeneous materials, nonhomogeneous materials, or a combination of homogeneous, nonhomogeneous, and/or inelastic impervious materials. These materials are commonly installed in the mobility products and in the transportation systems such as ground vehicles, marine products, aircraft, and commercial industry (in industrial and consumer products) to reduce reverberant sound build-up and thus reduce the noise level in the environment by minimizing reflections off of hard surfaces.

Standard

Laboratory Measurement of Random Incidence Sound Absorption Tests Using a Small Reverberation Room

2015-04-30

HISTORICAL

J2883_201504

This SAE Recommended Practice describes a laboratory test procedure for measuring the random incidence sound absorption performance of a material or a part in a small size reverberation room by measuring decay rates. The absorption performance may include sound absorption coefficient of the test sample and or the amount of energy absorbed by the test sample. Materials for absorption treatments may include homogeneous materials, nonhomogeneous materials, or a combination of homogeneous, nonhomogeneous, and/or inelastic impervious materials. These materials are commonly installed in the mobility products and in the transportation systems such as ground vehicles, marine products, aircraft, and commercial industry (in industrial and consumer products) to reduce reverberant sound build-up and thus reduce the noise level in the environment by minimizing reflections off of hard surfaces.