Search Results

Electronic Stability Control (ESC) has the potential of improving yaw stability and reducing the occurrence of a crash when a vehicle experiences a rear tire tread separation. Two instrumented 4-door, RWD SUV’s equipped with ESC were tested to evaluate the effectiveness of their ESC systems on maintaining yaw stability under these circumstances. The test vehicles were evaluated with the tread and outer steel belt removed from the right rear tire. Tests were run with the ESC engaged and then repeated with the ESC disengaged. All runs were completed with the tires inflated to the manufacturer’s recommended pressure. An analysis of the data collected shows that there are significant differences in the steering input required to generate a loss of control response with and without ESC enabled. Results of Sine with Dwell testing demonstrate a significant reduction in vehicle spinout response with the ESC engaged.

Tire marks left by the vehicle prior to impact, rollover, or other event, are important forensic evidence reconstruction of motor vehicle accidents. Often these tire marks have some curvature that is measured and used to calculate the speed of vehicles prior to the event. This calculation is based on the coefficient of friction of the tire/road interface and the radius of curvature of the vehicle center of gravity (c.g.) path. There is controversy about the validity of this approach. To explore this theory, a test vehicle was driven through a series of maneuvers that produced yaw marks for direct comparison of actual vehicle velocity to the velocity calculated by the critical speed formula. Test results show the critical speed formula is inaccurate for most circumstances and does not correctly describe vehicle limit performance behavior.

A series of tests were conducted utilizing a tire test machine built to measure forces during a tire tread separation event. Tires were prepared by cutting between the two steel belts inward from the shoulder area. Cuts were varied in size and location to generate different types of tread separation events (ex: long, short, partial, inboard, and outboard). The tests document the longitudinal and lateral forces generated while the tread is detaching during different types of tread separation events. The results demonstrate that magnitude and duration of forces depend upon the nature of the tread separation event. Additional documentation includes high speed and real time video of the tread separation events to provide insights into tread detachment modes and mechanisms of measured force response.

A series of open loop tests was conducted on three vehicles instrumented per SAE J266 to determine the effect of a rear tire tread separation on the vehicles’ behavior. The vehicles tested were a 1989 Ford Bronco II, a 1996 Ford Explorer, and a 1993 Ford Taurus. The tests were categorized as tread separation event tests and tread-separated tests. The tread separation event tests were designed to determine how the vehicle responds as the tread is separating from the tire carcass at speeds ranging from 58–119 km/h (36–74 mph). Tires were prepared in a manner that would initiate either a complete or partial separation of the tread. The vehicle was driven on a straight path with the steering wheel held fixed as the tread came off. The tread-separated tests were run on vehicles where the tread was removed from one of the rear tires. The maneuvers conducted were circle turns per SAE J266 (constant radius and constant steer) and step steer turns.

Temporary-use-only spare tires are common standard equipment on motor vehicles while run-flat tires are offered as standard equipment on some motor vehicles. This paper describes testing on a 1995 GMC Safari all-wheel-drive minivan with a rear Uniroyal Hideaway / Temporary-Use-Only tire and a 1997 Mercury Grand Marquis with a self-supporting run-flat tire manufactured by Bridgestone. The testing included circle turn tests and 180° step steer tests at target speeds of either 30 or 35 miles per hour (low speed J-turn test). Control tests were conducted with standard normally inflated tires. Both the standard tires and run-flat tires were also tested in a modified condition involving the removal of the tread and outer steel belt, simulating a tire which has experienced a complete tread-belt separation.

Catastrophic and sudden tire tread separation is an event that drivers of motor vehicles may encounter and, in some instances, is implicated as the cause of motor vehicle crashes and related injury or property damage. In an effort to understand how tire tread separation affects vehicle handling, a series of tread separation handling test programs were conducted. In each tread separation test program a sport utility vehicle was instrumented and equipped with steel belted radial tires that were modified to emulate tread separation between the inner and outer steel belts. The test vehicle was then subjected to a variety of open and closed loop handling test maneuvers. This paper presents the data and analysis from these tests. The research demonstrates through controlled experiments that a tire tread separation has an effect on the vehicle’s fundamental handling characteristics. It also demonstrates that the effect depends on the position of the compromised tire on the vehicle.