Search Results

Standard

ACOUSTIC EMISSION TEST METHODS

1991-03-01

HISTORICAL

J1242_199103

The scope of this SAE Information Report is to supply the user with sufficient information so that he may decide whether acoustic emission test methods apply to his particular inspection problem. Detailed technical information can be obtained by referring to Section 2.

Standard

Acoustic Emission Test Methods

2018-01-09

CURRENT

J1242_201801

The scope of this SAE Information Report is to supply the user with sufficient information so that he may decide whether acoustic emission test methods apply to his particular inspection problem. Detailed technical information can be obtained by referring to Section 2.

Standard

Automotive Ductile Iron Castings for High Temperature Applications

2004-06-15

HISTORICAL

J2582_200406

This SAE Standard covers the hardness, chemical analysis and microstructural requirements for ductile iron castings intended for high temperature service in automotive and allied industries. Commonly known as SiMo ductile iron, typical applications are in piston-engine exhaust manifolds and turbocharger parts. Castings may be specified in the as-cast or heat treated condition. For design purposes, the Appendix provides general information on the application of high temperature ductile iron castings, their processing conditions, chemical composition, mechanical properties and microstructure.

Standard

Automotive Ductile Iron Castings for High Temperature Applications

2018-01-09

CURRENT

J2582_201801

This SAE Standard covers the hardness, chemical analysis and microstructural requirements for ductile iron castings intended for high temperature service in automotive and allied industries. Commonly known as SiMo ductile iron, typical applications are in piston-engine exhaust manifolds and turbocharger parts. Castings may be specified in the as-cast or heat treated condition. For design purposes, the Appendix provides general information on the application of high temperature ductile iron castings, their processing conditions, chemical composition, mechanical properties and microstructure.

Standard

Automotive Gray Iron Castings

2000-12-06

HISTORICAL

J431_200012

This SAE Standard covers the hardness, tensile strength, and microstructure and special requirements of gray iron sand molded castings used in the automotive and allied industries. Specific requirements are provided for hardness of castings. Test bar tensile strength/Brinell hardness (t/h) ratio requirements are provided to establish a consistent tensile strength-hardness relationship for each grade to facilitate prediction and control of tensile strength in castings. Provision is made for specification of special additional requirements of gray iron automotive castings where needed for particular applications and service conditions. NOTE—This document was revised in 1993 to provide grade specific t/h control. In 1999 the document was revised to make SI metric units primary.

Standard

Automotive Gray Iron Castings

2018-01-09

CURRENT

J431_201801

This SAE Standard covers the hardness, tensile strength, and microstructure and special requirements of gray iron sand molded castings used in the automotive and allied industries. Specific requirements are provided for hardness of castings. Test bar tensile strength/Brinell hardness (t/h) ratio requirements are provided to establish a consistent tensile strength-hardness relationship for each grade to facilitate prediction and control of tensile strength in castings. Provision is made for specification of special additional requirements of gray iron automotive castings where needed for particular applications and service conditions. NOTE—This document was revised in 1993 to provide grade specific t/h control. In 1999 the document was revised to make SI metric units primary.

Standard

DETECTION OF SURFACE IMPERFECTIONS IN FERROUS RODS, BARS, TUBES, AND WIRES

1991-02-01

HISTORICAL

J349_199102

This SAE Information Report provides a summary of several methods that are available for detecting, and in some instances detecting and measuring, surface imperfections in rods, bars, tubes, and wires. References relating to detailed technical information and to specific applications are enumerated in 2.2.

Standard

Detection of Surface Imperfections In Ferrous Rods, Bars, Tubes, and Wires

2017-12-20

CURRENT

J349_201712

This SAE Information Report provides a summary of several methods that are available for detecting, and in some instances detecting and measuring, surface imperfections in rods, bars, tubes, and wires. References relating to detailed technical information and to specific applications are enumerated in 2.2.

Standard

ELECTROMAGNETIC TESTING BY EDDY CURRENT METHODS

1991-03-01

HISTORICAL

J425_199103

The purpose of this SAE Information Report is to provide general information relative to the nature and use of eddy current techniques for nondestructive testing. The document is not intended to provide detailed technical information but to serve as an introduction to the principles and capabilities of eddy current testing, and as a guide to more extensive references listed in Section 2.

Standard

HARD DRAWN CARBON STEEL VALVE SPRING QUALITY WIRE AND SPRINGS

1988-12-01

HISTORICAL

J172_198812

This SAE Recommended Practice covers the mechanical and chemical requirements of the best quality hard drawn carbon steel spring wire used for the manufacture of engine valve springs and other springs requiring high fatigue properties. It also covers the basic material and processing requirements of springs fabricated from this wire.

Standard

HARD DRAWN MECHANICAL SPRING WIRE AND SPRINGS

1988-12-01

HISTORICAL

J113_198812

This specification covers the mechanical and chemical requirements of hard drawn carbon steel spring wire in two classes used for the manufacture of mechanical springs and wire forms generally employed for applications subject to static loads or infrequent stress repetitions. This specification also covers basic material and processing requirements of the springs and forms fabricated therefrom. Class 2 is a higher tensile strength product and is furnished only when specified.

Standard

HARD-DRAWN MECHANICAL SPRING WIRE AND SPRINGS

1994-06-01

HISTORICAL

J113_199406

This SAE Recommended Practice covers the mechanical and chemical requirements of hard-drawn carbon-steel spring wire in two classes used for the manufacture of mechanical springs and wire forms generally employed for applications subject to static loads or infrequent stress repetitions. Class 2 is a higher tensile strength product. This specification also covers processing requirements of the springs and forms fabricated from this wire.

Standard

HARDNESS TESTS AND HARDNESS NUMBER CONVERSIONS

1983-12-01

HISTORICAL

J417_198312

This report lists approximate hardness conversion values; test methods for Vickers Hardness, Brinell Hardness, Rockwell Hardness Rockwell Superficial Hardness, Shore Hardness; and information regarding surface preparation, specimen thickness, effect of curved surfaces, and recommendations for Rockwell surface hardness testing for case hardened parts. The tables in this report give the approximate relationship of Vickers Brinell, Rockwell, and Scleroscope hardness values and corresponding approximate tensile strengths of steels. It is impossible to give exact relationships because of the inevitable influence of size, mass, composition, and method of heat treatment. Where more precise conversions are required, they should be developed specially for each steel composition, heat treatment, and part.

Standard

Hard Drawn Carbon Steel Valve Spring Quality Wire and Springs

1994-08-01

CURRENT

J172_199408

This SAE Recommended Practice covers the mechanical and chemical requirements of the best quality hard drawn carbon steel spring wire used for the manufacture of engine valve springs and other springs requiring high fatigue properties. It also covers the basic material and processing requirements of springs fabricated from this wire.

Standard

Hard-Drawn Mechanical Spring Wire and Springs

1998-06-01

CURRENT

J113_199806

This SAE Recommended Practice covers the mechanical and chemical requirements of hard-drawn carbon-steel spring wire in two classes used for the manufacture of mechanical springs and wire forms generally employed for applications subject to static loads or infrequent stress repetitions. Class 2 is a higher tensile strength product. This specification also covers processing requirements of the springs and forms fabricated from this wire.

Standard

Hardness Tests and Hardness Number Conversions

2018-01-10

CURRENT

J417_201801

This report lists approximate hardness conversion values; test methods for Vickers Hardness, Brinell Hardness, Rockwell Hardness Rockwell Superficial Hardness, Shore Hardness; and information regarding surface preparation, specimen thickness, effect of curved surfaces, and recommendations for Rockwell surface hardness testing for case hardened parts. The tables in this report give the approximate relationship of Vickers Brinell, Rockwell, and Scleroscope hardness values and corresponding approximate tensile strengths of steels. It is impossible to give exact relationships because of the inevitable influence of size, mass, composition, and method of heat treatment. Where more precise conversions are required, they should be developed specially for each steel composition, heat treatment, and part.

Standard

High-Strength Carbon and Alloy Die Drawn Steels

2009-11-24

CURRENT

J935_200911

This SAE Recommended Practice is intended to provide basic information on properties and characteristics of high-strength carbon and alloy steels which have been subjected to special die drawing. This includes both cold drawing with heavier-than-normal drafts and die drawing at elevated temperatures.

Standard

INFRARED TESTING

1991-02-01

HISTORICAL

J359_199102

The scope of this SAE Information Report is to provide general information relative to the nature and use of infrared techniques for nondestructive testing. The document is not intended to provide detailed technical information, but will serve as an introduction to the theory and capabilities of infrared testing and as a guide to more extensive references.

Standard

Infrared Testing

2018-01-09

CURRENT

J359_201801

The scope of this SAE Information Report is to provide general information relative to the nature and use of infrared techniques for nondestructive testing. The document is not intended to provide detailed technical information, but will serve as an introduction to the theory and capabilities of infrared testing and as a guide to more extensive references.

Standard

LIQUID PENETRANT TEST METHODS

1991-03-01

HISTORICAL

J426_199103

The scope of this SAE Information Report is to supply the user with sufficient information so that he may decide whether liquid penetrant test methods apply to his particular inspection problem. Detailed technical information can be obtained by referring to Section 2.