Search Results

Standard

BARKHAUSEN NOISE INSPECTION FOR DETECTING GRINDING BURNS IN HIGH STRENGTH STEEL PARTS

2010-11-01

ARP4462

This recommended practice covers the procedures and method for establishing acceptance criteria when performing Barkhausen noise testing of surface-hardened steel components to detect grinding burns (metallurgical damage caused by over-heating) in bare or chromium-plated parts.

Standard

Eddy Current Inspection of Circular Holes in Nonferrous Metallic Aircraft Engine Hardware

2013-06-11

AS4787

This SAE Aerospace Standard (AS) establishes minimum requirements for eddy current inspection of circular holes in nonferrous, metallic, aircraft engine hardware with fasteners removed. The inspection is intended to be performed at maintenance and overhaul facilities on engine run hardware.

Standard

Eddy Current Inspection of Circular Holes in Nonferrous Metallic Aircraft Engine Hardware

2019-10-14

AS4787A

This SAE Aerospace Standard (AS) establishes minimum requirements for eddy current inspection of circular holes in nonferrous, metallic, low conductivity (less than 5% IACS) aircraft engine hardware with fasteners removed. The inspection is intended to be performed at maintenance and overhaul facilities on engine run hardware.

Standard

Eddy Current Inspection of Open Fastener Holes in Aluminum Aircraft Structure

2013-06-11

ARP4402

This SAE Aerospace Recommended Practice establishes the requirements and procedures for eddy current inspection of open fastener holes in aluminum aircraft structures.

Standard

Enhanced Ultrasonic Immersion Inspection for Titanium Alloy and other Metal Alloy Billets

2019-05-16

AMS2628B

This specification covers procedures for ultrasonic immersion inspection of premium grade wrought titanium and titanium alloy round billet 5 inches (127 mm) and over in nominal diameter (see 8.5). Metal alloy billets other than titanium may be tested to this specification with the use of suitable reference standards.

Standard

Enhanced Ultrasonic Immersion Inspection for Titanium Alloy and other Metal Alloy Billets

2024-05-17

AMS2628C

This specification covers procedures for ultrasonic immersion inspection of premium-grade wrought titanium and titanium alloy round billet 5 inches (127 mm) and over in nominal diameter (see 2.6.1). Metal alloy billets other than titanium may be tested to this specification with the use of suitable reference standards.

Standard

FLUORESCENT PENETRANT INSPECTION

1965-02-15

AMS2645F

Standard

FLUORESCENT PENETRANT INSPECTION

1969-05-01

AMS2645G

Standard

Fluorescent Penetrant Inspection Aircraft Structures and Engine Component Maintenance

2021-09-20

AMS2647G

This specification details requirements and procedures for the detection of defects in aircraft structural and engine components during maintenance and overhaul operations.

Standard

IMAGE QUALITY INDICATOR Radiographic

2010-11-01

AS1613A

This Aerospace Standard establishes an identification system and provides design and tolerance information in describing two series of image quality indicators currently used in radiography of aerospace components, especially in electronic component evaluation and radiographic film and paper classification.

Standard

Image Quality Indicator Radiographic

2012-05-22

AS1613B

This Aerospace Standard establishes an identification system and provides design and tolerance information in describing two series of image quality indicators currently used in radiography of aerospace components, especially in electronic component evaluation and radiographic film and paper classification.

Standard

Inspection Process, Magnetic Rubber

2007-02-16

AMSI83387

This specification covers the general procedural requirements necessary for the performance of magnetic rubber inspection.

Standard

Inspection, Ultrasonic Product Over 0.5 Inch (12.7 mm) Thick

2018-08-08

AMS2630D

This specification covers procedures for ultrasonic inspection, by pulse-echo procedures, of flat, rectangular, round, cylindrical, and contoured products having a thickness or cross-sectional dimension greater than 0.5 inch (12.7 mm), using either contact or immersion methods, and using the longitudinal-wave or shear-wave modes or combinations of the two, as necessary. This specification may apply to testing finished machined parts provided the parts can meet the basic testability requirements, such as size, contour, metallurgical structure, and thickness.

Standard

Inspection, Ultrasonic Product Over 0.5 Inch (12.7 mm) Thick

2010-01-05

AMS2630C

This specification covers procedures for ultrasonic inspection, by pulse-echo procedures, of flat, rectangular, round, cylindrical, and contoured products having a thickness or cross-sectional dimension greater than 0.50 inch (12.7 mm), using either contact or immersion methods, and using the longitudinal-wave or shear-wave modes or combinations of the two, as necessary. This specification may apply to testing finished machined parts provided the parts can meet the basic testability requirements, such as size, contour, metallurgical structure, and thickness.

Standard

Inspection, Ultrasonic Product Over 0.5 Inch (12.7 mm) Thick

2021-11-09

AMS2630E

This specification covers procedures for ultrasonic inspection, by pulse-echo procedures, of flat, rectangular, round, cylindrical, and contoured products having a thickness or cross-sectional dimension greater than 0.5 inch (12.7 mm), using either contact or immersion methods, and using the longitudinal-wave or shear-wave modes or combinations of the two, as necessary. This specification may apply to testing finished machined parts provided the parts can meet the basic testability requirements, such as size, contour, metallurgical structure, and thickness.

Standard

Inspection, Ultrasonic Product Over 0.5 Inch (12.7 mm) Thick

2008-10-22

AMS2630B

This specification covers procedures for ultrasonic inspection, by pulse-echo procedures, of flat, rectangular, round, cylindrical, and contoured products having a thickness or cross-sectional dimension greater than 0.50 inch (12.7 mm), using either contact or immersion methods, and using the longitudinal-wave or shear-wave modes or combinations of the two, as necessary. This specification may apply to testing finished machined parts provided the parts can meet the basic testability requirements, such as size, contour, metallurgical structure, and thickness.

Standard

Inspection, Ultrasonic, Wrought Metals, Process For

2010-11-01

AMSSTD2154

The purpose of this military standard is to provide uniform methods for the ultrasonic inspection of wrought metals and wrought metal products.

Standard

Inspection, Ultrasonic, Wrought Metals, Process For

2012-10-10

AMSSTD2154A

The purpose of this military standard is to provide uniform methods for the ultrasonic inspection of wrought metals and wrought metal products.

Standard

Inspection, Ultrasonic, Wrought Metals, Process for

2017-05-18

ARD50015

The purpose of this standard is to provide uniform methods for the ultrasonic inspection of wrought metals and wrought metal products.

Standard

Inspection, Ultrasonic, Wrought Metals, Process for

2017-05-18

AMSSTD2154C

The purpose of this standard is to provide uniform methods for the ultrasonic inspection of wrought metals and wrought metal products.