Search Results

Standard

Bars, Rods, and Shapes Produced from 30% Carbon Fiber Filled Polyamide-Imide (PAI) Material

2021-05-19

AMS3670/5D

This specification covers molded or extruded bar, rod, and shapes produced from a polyamide-imide polymer filled with 30% carbon fiber. This is designated as Grade 5 material per AMS3670.

Standard

Bars, Rods, and Shapes Produced from Unfilled Polyamide-Imide (PAI) Material

2021-05-19

AMS3670/1C

This specification covers an unfilled polyamide-imide plastic in the form of molded or extruded bar, rod, and shapes. This is designated as Grade 2 material per AMS3670.

Standard

Batch Qualification Procedure for Tensile Strength, Elongation and Specific Gravity of Polytetrafluoroethylene (PTFE) Resins, Virgin, Modified, Pigmented and Filled Compounds Used for Compression Molding

2007-09-05

AS4720

This SAE Aerospace Standard (AS) covers batch qualification procedure for virgin and compounded polytetrafluoroethylene (PTFE) resins used for compression molding. AS9100 requires virgin and modified PTFE as a testing material be representative of production PTFE and/or parts. The testing specified herein is limited to tensile strength, elongation and specific gravity. Any other tests required by the purchaser must be specified separately.

Standard

Batch Qualification Procedure for Tensile Strength, Elongation and Specific Gravity of Polytetrafluoroethylene (PTFE) Resins, Virgin, Modified, Pigmented and Filled Compounds Used for Compression Molding

2013-11-06

AS4720A

This SAE Aerospace Standard (AS) covers batch qualification procedure for virgin and compounded polytetrafluoroethylene (PTFE) resins used for compression molding. AS9100 requires virgin and modified PTFE as a testing material be representative of production PTFE and/or parts. The testing specified herein is limited to tensile strength, elongation and specific gravity. Any other tests required by the purchaser must be specified separately.

Standard

CERAMIC MOLDINGS AND EXTRUSIONS Dense, Ultra-High Alumina (99% Al2O3)

1993-01-01

AMS3870D

Standard

ETHYLENE TETRAFLUOROETHYLENE MOLDINGS Stress-Relieved

2011-08-09

AMS3534A

This specification covers a melt-processible, copolymer resin of ethylene and tetrafluoroethylene (ETFE) in the form of molded rods, tubes, and shapes.

Standard

ETHYLENE TETRAFLUOROETHYLENE MOLDINGS Stress-Relieved

1995-10-01

AMS3534

This specification covers a melt-processible, copolymer resin of ethylene and tetrafluoroethylene (ETFE) in the form of molded rods, tubes, and shapes.

Standard

Ethylene Tetrafluoroethylene (Etfe) Molded Sheet, Stress-Relieved

1993-10-01

AMS3532C

This specification has been "CANCELLED" by the Aerospace Materials Division, SAE, as of October 1995.

Standard

Glass Sheet, Barium Aluminum Borosilicate for Electronic Applications

1995-10-01

AMS3883A

No scope available.

Standard

Insulation, Electrical, Pasted-Mica

2016-07-06

AMSI538A

This specification covers pasted-mica electrical insulation for molded armature slot bases, commutator insulation, shells, heating elements, and other similar insulating purposes.

Standard

Insulation, Electrical, Pasted-Mica

1999-06-01

AMSI538

This specification covers pasted-mica electrical insulation for molded armature slot bases, commutator insulation, shells, heating elements, and other similar insulating purposes.

Standard

MOLD RELEASE AGENT

1978-10-01

AMS3091A

This specification covers a mold release agent in the form of a liquid.

Standard

MOLD RELEASE AGENT

2011-08-08

AMS3091B

This specification covers a mold release agent in the form of a liquid.

Standard

MOLD RELEASE AGENT

1971-11-01

AMS3091

This specification covers a mold release agent in liquid form.

Standard

MOLDED RIGID PLASTIC PARTS

1983-07-01

AIR1269A

Standard

MOLDINGS, GLASS FIBER FILLED POLYTETRAFLUOROETHYLENE 75 PTFE Resin, 25 Glass, As Sintered

1994-04-01

AMS3756A

This specification covers one grade of glass-fiber-filled polytetrafluoroethylene in the form of molded billets.

Standard

Molded Rigid Plastic Parts

2003-05-05

AIR1269B

This SAE Aerospace Information Report (AIR) provides recommendations for the best practices to be followed in the molding of rigid thermoplastic and thermosetting molding compounds. The molding processes covered in this document are injection, transfer and compression molding. Recommendations are made on the design details of the part such as draft angles and processing considerations such as gate location in order to yield an easily producible, high quality, functional part.

Standard

Molded Rigid Plastic Parts

2011-08-24

AIR1269C

This SAE Aerospace Information Report (AIR) provides recommendations for the best practices to be followed in the molding of rigid thermoplastic and thermosetting molding compounds. The molding processes covered in this document are injection, transfer and compression molding. Recommendations are made on the design details of the part such as draft angles and processing considerations such as gate location in order to yield an easily producible, high quality, functional part.

Standard

Molded Rigid Plastic Parts

2011-02-10

AIR1269

This SAE Aerospace Information Report (AIR) provides recommendations for the best practices to be followed in the molding of rigid thermoplastic and thermosetting molding compounds. The molding processes covered in this document are injection, transfer and compression molding. Recommendations are made on the design details of the part such as draft angles and processing considerations such as gate location in order to yield an easily producible, high wuality, functinoal part.

Standard

Molded or Extruded Bar, Rod, and Shapes Produced from 20% Graphite – 3% Polytetrafluoroethylene (PTFE) Filled Polyamide-Imide (PAI) Material

2021-05-19

AMS3670/2C

This specification covers molded or extruded bar, rod, and shapes produced from a polyamide-imide (PAI) polymer filled with 20% graphite and 3% polytetrafluoroethylene (PTFE). This is designated as Grade 2 material per AMS3670.